# changelog

author: Lubomir Rintel <lkundrak@v3.sk> - 1.10.2-1
changelog:
  - Update to 1.10.2 release (rh #1543498)
  - Don't grab cdc_ether devices on Sierra QMI modems (rh #1712031)


author: Thomas Haller <thaller@redhat.com> - 1:1.22.0-0.2
changelog:
  - Update to 1.22-rc1 (1.21.90)
  - large internal rework of libnm's NMClient
  - dhcp: switch implementation of "internal" DHCP to nettools' n-dhcp4
  - add support for carrier state of devices on D-Bus/libnm (rh #1722024)
  - cloud-setup: add initial and experimental tool for configuring in cloud (rh #1642461)
  - dhcp: support configuring FQDN hostname flags (rh #1649368)


author: Thomas Haller <thaller@redhat.com> - 1:1.22.2-1
changelog:
  - Update to 1.22.2
  - core,libnm: expose capability for OVS support (rh #1785147)
  - dhcp: various bugfixes for nettools n-dhcp4 plugin


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.22.4-1
changelog:
  - Update to 1.22.4
  - dhcp: fix behavior of internal DHCP client when the server sends a NAK (rh #1787219)


author: Antonio Cardace <acardace@redhat.com> - 1:1.22.6-1
changelog:
  - Update to 1.22.6
  - nm-device: add new pending action to keep the device busy when in between states (rh #1759956)
  - cloud-setup: avoid unsupported settings in systemd service unit (rh #1791758)
  - do not create virtual device if master is not present (rh #1795919)
  - allow IPv6 RA timeout to be set to a value higher than 120 seconds (rh #1795957)
  - fix behaviour when 'ipv4.dhcp-timeout' option is set to 'infinity' (rh #1791378)


author: Antonio Cardace <acardace@redhat.com> - 1:1.22.8-1
changelog:
  - Update to 1.22.8
  - Added configuration option to customize IPv6 RA timeout (rh #1801158)
  - Removed length limitation for OVS Bridge, Patches and Interfaces (only Patch types) names (rh #1788432)
  - Reworked asynchronous deactivation of OVS interfaces (rh #1787989, rh #1782701)
  - Fixed failure when creating team interfaces (rh #1798947)
  - ifcfg-rh: fix clearing ovs slave type from ifcfg-rh file (rh #1804167)
  - Fixed bug causing virtual devices to not be available after AddConnection()/Update() (rh #1804350)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.22.8-3
changelog:
  - dhcp: keep trying after a send failure (rh #1806516)
  - ovs: fail port enslavement when the bridge is not found (rh #1797696)


author: Thomas Haller <thaller@redhat.com> - 1:1.22.8-4
changelog:
  - core: fix leaking device state files in /run (rh #1810153)
  - dhcp: fix crash in nettools client when leaking GSource (rh #1810188)


author: Josef Ridky <jridky@redhat.com> - 2.0.25-1
changelog:
  - New upstream release 2.0.25 (#1568194)
  - Replace Python2 with Python3
  - Drop OpenIPMI-python2 and set it as Obsolete
  - Introduce new OpenIPMI-python3 package
  - use ldconfig macros
  - remove old systemd dependencies
  - use autosetup


author: Kamil Dudka <kdudka@redhat.com> 2.2.52-14
changelog:
  - drop obsolete BuildRoot and Group tags
  - fix spurious acl_check() failure on setfacl --restore (#1451826)


author: Kamil Dudka <kdudka@redhat.com> 2.2.52-15
changelog:
  - setfacl.1: document the meaning of '-' in perms (#1337039)
  - avoid failure of %check when building as root (#1085389)
  - apply patches automatically to ease maintenance


author: Al Stone <ahs3@redhat.com> - 20180209-1
changelog:
  - Update to 20180209 source tree, including patch refeshes. Closes BZ#1544048
  - CVE-2017-13693: operand cache leak in dsutils.c -- applied github patch to
    fix the leak.  Resolves BZ#1485346.
  - CVE-2017-13694: acpi parse and parseext cache leaks in psobjects.c -- applied
    github patch to fix the leaks.  Resolves BZ#1485348.
  - CVE-2017-13695: operand cache leak in nseval.c -- applied github patch to fix
    the leak.  Resolves BZ#1485349.
  - Security fixes for the CVEs above applied.  Closes BZ#1485355.  NOTE: these
    patches fix acpica-tools ONLY; the kernel needs to be patch separately.
  - Added gcc to BuildRequires
  - It turns out the %build section was incorrectly passing in OPT_CFLAGS; it
    made the wrong assumptions about what generate/unix/Makefile.config did with
    that value.  Added to the spec file what should happen so that a full and
    complete set of C flags get passed in, not just the small subset that was.
  - Clean up compiler warnings for truncated strings
  - Clean up compiler warnings for pointer casting on 32-bit architectures


author: Al Stone <ahs3@redhat.com> - 20180508-1
changelog:
  - Update to 20180508 source tree, including patch refeshes. Closes BZ#1544048
  - acpidump/acpixtract no longer have alternatives, so remove the scriptlets
    that maintain them and just install them directly; we do leave the pre-
    and post- scriptlets to remove the alternatives for now.  Closes BZ#1576970
  - Typo: OPT_LDFLAGS, not OPT_LDLAGS in the build section.  Closes BZ#1560542


author: Al Stone <ahs3@redhat.com> - 20180508-2
changelog:
  - %pre and %post scriptlets fail -- stupid thinko where I inadvertently
    tested for alternatives not existing, vs existing


author: Al Stone <ahs3@redhat.com> - 20180629-1
changelog:
  - Update to 20180629 source tree, including patch refeshes. Closes BZ#1584923
  - Includes upstream fix for #1592971 (iasl segfault).


author: Al Stone <ahs3@redhat.com> - 20180629-3
changelog:
  - Add in man page for acpiexamples.  So that the man page makes some sense,
    also copy the source code used for acpiexamples to the doc directory for
    this package.  Closes BZ#1611145.
  - Add in the converterSample.asl file from the misc tests.  Clean up the
    run-misc-tests.sh script, too, to make it more robust by simplifying
    the work done.


author: Sumit Bose <sbose@redhat.com> - 0.8.2-1
changelog:
  - Update to upstream release 0.8.2
  - various other fixes and improvements from the latest Fedora update


author: Sumit Bose <sbose@redhat.com> - 0.8.2-3
changelog:
  - use autosetup macro to simplify patch handling
  - fixed rpmlint warnings in the spec file
  - join failed if hostname is not FQDN [#1677194]
  - adcli join fails in FIPS enabled environment [#1717355]
  - forward port of RHEL-7.7 fixes and enhancements


author: Sumit Bose <sbose@redhat.com> - 0.8.2-4
changelog:
  - adcli update --add-samba-data does not work as expected [#1745931]
  - Issue is that with arcfour-hmac as first encryption type [#1745932]
  - [RFE] enhancement adcli to set description attribute and to show all AD
    attributes [#1737342]


author: Tomáš Mráz <tmraz@redhat.com> - 3.1.20-7
changelog:
  - the ownership of the spool directory should be root as at is configured
    with daemon username root
  - document the -n option


author: Jakub Martisko <jamartis@redhat.com> - 3.10.3-1
changelog:
  - Update to new 3.10.3 stable version.
  - Remove ppc64/ppc64le related patches.
  - All packages now use -A option to specify the target CPU/Architecture instead of 
  sed substitutions and auto detection. The packages should now be less dependant on the 
  builder machine used.
  - Base package for each architecture should now be configured to be compatible with the 
  most basic machine of given type.
  - In addittion to base package, added some optimized packages for more advanced CPUs for
  most architectures.
  - Dropped sse2/sse3 subpackages for ix86


author: Jakub Martisko <jamartis@redhat.com> - 3.10.3-6
changelog:
  * Pass all required compiler/linker flags
  - use annobin plugin
  - generate assembler build notes
  Related: #1624098


author: Kamil Dudka <kdudka@redhat.com> 2.4.47-19
changelog:
  - fix test-suite failure with perl-5.26.0 (#1473853)
  - apply patches automatically to ease maintenance
  - update URL of the upstream source tarball


author: Steve Grubb <sgrubb@redhat.com> 3.0-0.8.20180831git0047a6c
changelog:
  resolves: rhbz#1639745 - build requires go-toolset-7 which is not available
  resolves: rhbz#1643567 - service auditd stop exits prematurely
  resolves: rhbz#1616428 - Update git snapshot of audit package
  - Remove static libs subpackage


author: Steve Grubb <sgrubb@redhat.com> 3.0-0.11.20190607gitf58ec40
changelog:
  resolves: rhbz#1643567 - service auditd stop exits prematurely
  resolves: rhbz#1693470 - libauparse memory leak
  resolves: rhbz#1694071 - ausearch doesn't record device/inode details checkpointing a single file
  resolves: rhbz#1695638 - Rebase audit package to pick up latest bugfixes
  resolves: rhbz#1705894 - aureport aborts when using a specific input
  resolves: rhbz#1706045 - RFE: Backport support for new audit record types
  resolves: rhbz#1715852 - RFE: provide a way to filter on network address family


author: Steve Grubb <sgrubb@redhat.com> 3.0-0.15.20191104git1c2f876
changelog:
  resolves: rhbz#1757986 - Rebase audit package on 8.2 for updates
  resolves: rhbz#1767054 - move audit rules to shared data directory
  resolves: rhbz#1746018 - Breakup 30-ospp-v42.rules into more granular files
  resolves: rhbz#1740798 - auditctl(8) needs clarification for backlog_limit
  resolves: rhbz#1497279 - Add option to interpret fields in audit syslog plugin


author: Pino Toscano <ptoscano@redhat.com> - 1.10.1-4
changelog:
  - Grub: better handle invalid grub.conf files (RHBZ#1649262)
  - Sudoers: handle "always_query_group_plugin" option (RHBZ#1649299)


author: Pino Toscano <ptoscano@redhat.com> - 1.10.1-6
changelog:
  - Semanage: new lens (RHBZ#1652840)
  - Add "Provides: bundled(gnulib)" to augeas-libs, as it embeds gnulib
    (RHBZ#1653768)


author: Pino Toscano <ptoscano@redhat.com> - 1.12.0-5
changelog:
  - Fix completion with special characters in augtool. (RHBZ#1232224)
  - Krb5: improve handling of [dbmodules]; allow include/includedir directives
    everywhere (RHBZ#1798486)
  - Systemd: improve parsing of quoted variables of Environment (RHBZ#1798922)


author: Pavel Březina <pbrezina@redhat.com> - 1.0-7
changelog:
  - pam_systemd shouldn't be optional in system-auth (RHBZ #1643928)
  - compat tool: support --enablerequiresmartcard (RHBZ #1649277)
  - compat tool: support --smartcardaction=0 (RHBZ #1649279)
  - remove ecryptfs from authselect since it is not present in rhel8 (RHBZ #1649282)
  - authselect enable-features should error on unknown features (RHBZ #1651637)


author: Pavel Březina <pbrezina@redhat.com> - 1.0-9
changelog:
  - fix sources for official rhel translations (RHBZ #1608286)
  - fix coverity warnings for authselect enable-features should error on unknown features (RHBZ #1651637)


author: Pavel Březina <pbrezina@redhat.com> - 1.0-12
changelog:
  - make authselect work with selinux disabled (RHBZ #1668025)
  - require smartcard authentication only for specific services (RHBZ #1665058)
  - update translations (RHBZ #1608286)


author: Jakub Hrozek <jhrozek@redhat.com> - 1.0-13
changelog:
  - Revert pam_systemd.so to be optional
  - Resolves: #rhbz1643928 - pam_systemd shouldn't be optional in system-auth


author: Pavel Březina <pbrezina@redhat.com> - 1.1-1
changelog:
  - Rebase to authselect-1.1 (RHBZ #1685516)
  - Notify that oddjob-mkhomedir needs to be enabled manually (RHBZ #1694103)
  - Ask for smartcard insertion when smartcard authentication is required (RHBZ #1674397)
  - Update translations (RHBZ #1689973)


author: Ian Kent <ikent@redhat.com> - 5.1.4-31
changelog:
  - bz1689467 - path_resolution on an autofs managed path resets the timer. Can
    this be made configurable?
    - support strictexpire mount option.
  - Resolves: rhbz#1689467


author: Ian Kent <ikent@redhat.com> - 5.1.4-32
changelog:
  - bz1703876 - [RFE] Enable additional logging information for autofs
    - add NULL check for get_addr_string() return.
    - use malloc(3) in spawn.c.
    - add mount_verbose configuration option.
    - optionally log mount requestor process info.
    - log mount call arguments if mount_verbose is set.
  - Resolves: rhbz#1703876


author: Ian Kent <ikent@redhat.com> - 5.1.4-33
changelog:
  - bz1689466 - Sanitize autofs logging
    - make expire remaining log level debug.
  - bz1685805 - autofs doesn't expand macros in amd map selectors
    - allow period following macro in selector value.
    - fix macro expansion in selector values.
  - Resolves: rhbz#1689466 rhbz#1685805


author: Ian Kent <ikent@redhat.com> - 5.1.4-34
changelog:
  - bz1681956 - autofs changes blocked until gating tests are added
    - add gating.yaml for manual gate testing.
  - Related: rhbz#1681956


author: Ian Kent <ikent@redhat.com> - 5.1.4-35
changelog:
  - bz1681956 - autofs changes blocked until gating tests are added
    - correct test name in gating.yaml.
  - Related: rhbz#1681956


author: Ian Kent <ikent@redhat.com> - 5.1.4-36
changelog:
  - bz1743442 - getmntent returns additional "-hosts" entries when
    automounter is used with "hosts" map (userspace part)
    - also use strictexpire for offsets (mounts).
    - change expire type naming to better reflect usage.
    - remove unused function has_fstab_option().
    - remove unused function reverse_mnt_list().
    - remove a couple of old debug messages.
    - fix amd entry memory leak.
    - fix unlink_mount_tree() not umounting mounts.
    - add ignore mount option.
    - use ignore option for offset mounts as well.
    - add config option for "ignore" mount option.
    - use bit flags for autofs mount types in mnt_list.
    - use mp instead of path in mnt_list entries.
    - always use PROC_MOUNTS to make mount lists.
    - add glibc getmntent_r().
    - use local getmntent_r in table_is_mounted().
    - refactor unlink_active_mounts() in direct.c.
    - don't use tree_is_mounted() for mounted checks.
    - use single unlink_umount_tree() for both direct and indirect mounts.
    - move unlink_mount_tree() to lib/mounts.c.
    - use local_getmntent_r() for unlink_mount_tree().
    - use local getmntent_r() in get_mnt_list().
    - use local getmntent_r() in tree_make_mnt_list().
    - fix missing initialization of autofs_point flags.
  - Resolves: rhbz#1743442


author: Ian Kent <ikent@redhat.com> - 5.1.4-37
changelog:
  - bz1660145 - autofs.schema doesn't work in RHEL8
    - update ldap READMEs and schema definitions.
  - Resolves: rhbz#1660145


author: Ian Kent <ikent@redhat.com> - 5.1.4-38
changelog:
  - bz1660145 - autofs.schema doesn't work in RHEL8
    - update spec file doc inclusions for schema definition update.
  - Related: rhbz#1660145


author: Ian Kent <ikent@redhat.com> - 5.1.4-39
changelog:
  - bz1802251 - Autofs will only mount share once if sss is first ini
    nsswitch.conf
    - fix a regression with map instance lookup.
  - Resolves: rhbz#1802251


author: Michal Sekletár <msekleta@redhat.com> - 0.7-19
changelog:
  - make sure we get compiled with -fstack-protector-strong (#1624099)
  - fix issues reported by coverity (#1602449)


author: Kevin Fenzi <kevin@scrye.com> - 1.07.1-1https://bugs.archlinux.org/task/53546
changelog:
  - Update to 1.07.1
  - Fixes a bug that breaks kernel builds ( https://bugs.archlinux.org/task/53546 )


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.12-2
changelog:
  - Add GeoLite2 support (#1564443)
  - Add GeoIP to bind-chroot (#1497646)
  - Fix wrong default GeoIP directory (#1768258)


author: Nick Clifton <nickc@redhat.com> - 2.30-71
changelog:
  - Fix a potential seg-fault in the BFD library when parsing pathalogical debug_info sections.  (#1779245)
  - Fix a potential memory exhaustion in the BFD library when parsing corrupt DWARF debug information.


author: Nick Clifton <nickc@redhat.com> - 2.30-72
changelog:
  - Allow the BFD library to handle the copying of files containing secondary reloc sections.  (#1801879)


author: Iryna Shcherbina <ishcherb@redhat.com> - 1.2.0-2
changelog:
  - Update Python 2 dependency declarations to new packaging standards
    (See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3)


author: Tomas Orsava <torsava@redhat.com> - 1.2.0-9
changelog:
  - Switch hardcoded python3 shebangs into the %{__python3} macro
  - Add missing BuildRequires on python3-devel so that %{__python3} macro is
    defined


author: Christian Kellner <ckellner@redhat.com> - 0.1-2
changelog:
  - Set database path to /var/lib/boltd, create it during
    installation, which is needed for the service file to work.


author: Christian Kellner <ckellner@redhat.com> - 0.8-1
changelog:
  - bolt 0.8 upstream release with pre-boot ACL and IOMMU support
    D-Bus Configuration moved from sysconfdir to datadir
    Resolves: #1629715


author: Marian Csontos <mcsontos@redhat.com> 0.9-7
changelog:
  - Reduce log level of "Could not load BootEntry" messages.
  - Raise more appropriate LookupError on unknown BLS keys.


author: Bruno Meneguele <bmeneg@redhat.com> [4.18.0-193.el8]
changelog:
  - [kvm] KVM: PPC: Book3S HV: Use __gfn_to_pfn_memslot in HPT page fault handler (Sam Bobroff) [1815491]
  - [net] tcp: also NULL skb->dev when copy was needed (Florian Westphal) [1775961]
  - [net] tcp: ensure skb->dev is NULL before leaving TCP stack (Florian Westphal) [1775961]


author: Bruno Meneguele <bmeneg@redhat.com> [4.18.0-193.1.1.el8_2]
changelog:
  - [x86] kvm: x86: clear stale x86_emulate_ctxt->intercept value (Jon Maloy) [1824398 1806817] {CVE-2020-2732}
  - [x86] kvm: vmx: check descriptor table exits on instruction emulation (Jon Maloy) [1824398 1806817] {CVE-2020-2732}
  - [x86] kvm: nvmx: Check IO instruction VM-exit conditions (Jon Maloy) [1824398 1806817] {CVE-2020-2732}
  - [x86] kvm: nvmx: Refactor IO bitmap checks into helper function (Jon Maloy) [1824398 1806817] {CVE-2020-2732}
  - [x86] kvm: nvmx: Don't emulate instructions in guest mode (Jon Maloy) [1824398 1806817] {CVE-2020-2732}
  - [sound] ALSA: usb-audio: set the interface format after resume on Dell WD19 (Perry Yuan) [1821376 1807965]
  - [kernel] sched: Avoid scale real weight down to zero (Phil Auld) [1819909 1808562]
  - [netdrv] hv_netvsc: Fix unwanted rx_table reset (Mohammed Gamal) [1817945 1805950]
  - [netdrv] hv_netvsc: Fix tx_table init in rndis_set_subchannel() (Mohammed Gamal) [1817945 1805950]
  - [netdrv] hv_netvsc: Fix send_table offset in case of a host bug (Mohammed Gamal) [1817945 1805950]
  - [netdrv] hv_netvsc: Fix offset usage in netvsc_send_table() (Mohammed Gamal) [1817945 1805950]


author: Bruno Meneguele <bmeneg@redhat.com> [4.18.0-193.2.1.el8_2]
changelog:
  - [net] vti[6]: fix packet tx through bpf_redirect() in XinY cases (Sabrina Dubroca) [1821375 1795145]
  - [net] xfrm interface: fix packet tx through bpf_redirect() (Sabrina Dubroca) [1821375 1795145]
  - [net] vti[6]: fix packet tx through bpf_redirect() (Sabrina Dubroca) [1821375 1795145]
  - [scripts] redhat: fix modpost.c prerequisites (Frantisek Hrbata) [1828229 1818499]
  - [infiniband] IB/core: Avoid deadlock during netlink message handling (Kamal Heib) [1821381 1818986]
  - [infiniband] RDMA/core: Support netlink commands in non init_net net namespaces (Kamal Heib) [1821381 1818986]
  - [misc] mei: me: add comet point (lake) H device ids (Ken Cox) [1825262 1815355]
  - [misc] mei: me: add comet point (lake) LP device ids (Ken Cox) [1825262 1815355]
  - [misc] mei: define dma ring buffer sizes for PCH12 HW and newer (Ken Cox) [1825262 1815355]
  - [misc] mei: hbm: define dma ring setup protocol (Ken Cox) [1825262 1815355]
  - [net] SUNRPC: fix krb5p mount to provide large enough buffer in rq_rcvsize (Steve Dickson) [1826219 1825388]
  - [mm] mm, numa: fix bad pmd by atomically check for pmd_trans_huge when marking page tables prot_numa (Rafael Aquini) [1827619 1763878]
  - [mm] mm: thp: fix flags for pmd migration when split (Rafael Aquini) [1827619 1763878]
  - [mm] mm: thp: relocate flush_cache_range() in migrate_misplaced_transhuge_page() (Rafael Aquini) [1827619 1763878]
  - [mm] mm: thp: fix mmu_notifier in migrate_misplaced_transhuge_page() (Rafael Aquini) [1827619 1763878]
  - [mm] mm: thp: fix MADV_DONTNEED vs migrate_misplaced_transhuge_page race condition (Rafael Aquini) [1827619 1763878]
  - [md] Revert "dm: always call blk_queue_split() in dm_process_bio()" (Mike Snitzer) [1821382 1820705]


author: Bruno Meneguele <bmeneg@redhat.com> [4.18.0-193.3.1.el8_2]
changelog:
  - [kernel] sched/isolation: Allow "isolcpus=" to skip unknown sub-parameters (Peter Xu) [1832367 1799014]
  - [firmware] efi: fix a mistype in comments mentioning efivar_entry_iter_begin() (Vladis Dronov) [1829527 1804417]
  - [firmware] efi: add a sanity check to efivar_store_raw() (Vladis Dronov) [1829527 1804417]
  - [firmware] efi: fix a race and a buffer overflow while reading efivars via sysfs (Vladis Dronov) [1829527 1804417]
  - [net] net/smc: keep vlan_id for SMC-R in smc_listen_work() (Philipp Rudo) [1827631 1796890]


author: Bruno Meneguele <bmeneg@redhat.com> [4.18.0-193.4.1.el8_2]
changelog:
  - [bluetooth] Revert "Bluetooth: btusb: driver to enable the usb-wakeup feature" (Gopal Tiwari) [1827620 1811534]
  - [net] netlabel: cope with NULL catmap (Paolo Abeni) [1827249 1827251] {CVE-2020-10711}
  - [mm] s390/mm: fix page table upgrade vs 2ndary address mode accesses (Vladis Dronov) [1828153 1828154] {CVE-2020-11884}


author: Bruno Meneguele <bmeneg@redhat.com> [4.18.0-193.6.1.el8_2]
changelog:
  - [char] tpm: ibmvtpm: retry on H_CLOSED in tpm_ibmvtpm_send() (Steve Best) [1827632 1808048]
  - [netdrv] bonding: fix active-backup transition after link failure (Jarod Wilson) [1838477 1819408]
  - [netdrv] bonding: fix state transition issue in link monitoring (Jarod Wilson) [1838477 1819408]
  - [kernel] sched/fair: Allow a per-CPU kthread waking a task to stack on the same CPU, to fix XFS performance regression (Phil Auld) [1834517 1745111]
  - [block] block, bfq: fix use-after-free in bfq_idle_slice_timer_body (Ming Lei) [1835531 1835532] {CVE-2020-12657}
  - [kvm] KVM: x86: use raw clock values consistently (Marcelo Tosatti) [1822498 1768622]
  - [kvm] KVM: x86: reorganize pvclock_gtod_data members (Marcelo Tosatti) [1822498 1768622]
  - [kvm] KVM: x86: switch KVMCLOCK base to monotonic raw clock (Marcelo Tosatti) [1822498 1768622]


author: Bruno Meneguele <bmeneg@redhat.com> [4.18.0-193.6.2.el8_2]
changelog:
  - [documentation] x86/speculation: Add Ivy Bridge to affected list (Josh Poimboeuf) [1827191 1827192] {CVE-2020-0543}
  - [documentation] x86/speculation: Add SRBDS vulnerability and mitigation documentation (Josh Poimboeuf) [1827191 1827192] {CVE-2020-0543}
  - [x86] x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation (Josh Poimboeuf) [1827191 1827192] {CVE-2020-0543}
  - [x86] x86/cpu: Add 'table' argument to cpu_matches() (Josh Poimboeuf) [1827191 1827192] {CVE-2020-0543}
  - [x86] x86/cpu: Add a steppings field to struct x86_cpu_id (Josh Poimboeuf) [1827191 1827192] {CVE-2020-0543}


author: Pavel Raiskup <praiskup@redhat.com> - 3.3.2-4
changelog:
  - fix out-of-bounds read within lha_read_data_none() (CVE-2017-14503)
  - fix crash on crafted 7zip archives (CVE-2019-1000019)
  - fix infinite loop in ISO9660 (CVE-2019-1000020)


author: Ondrej Dubaj <odubaj@redhat.com> - 3.3.2-7
changelog:
  - fix use-after-free in delayed newc link processing (#1602575)
  - fix a few obvious resource leaks and strcpy() misuses (#1602575)


author: Colin Walters <walters@verbum.org> - 0.1.7-1
changelog:
  - New upstream version;
    https://github.com/projectatomic/bubblewrap/releases/tag/v0.1.7
  - Resolves: #1411814


author: Bob Relyea <rrelyea@redhat.com> - 2019.2.32-80.0
changelog:
  - Update to CKBI 2.32 from NSS 3.44
  -  Removing:
  -   # Certificate "Visa eCommerce Root"
  -   # Certificate "AC Raiz Certicamara S.A."
  -   # Certificate "ComSign CA"
  -   # Certificate "Certplus Root CA G1"
  -   # Certificate "Certplus Root CA G2"
  -   # Certificate "OpenTrust Root CA G1"
  -   # Certificate "OpenTrust Root CA G2"
  -   # Certificate "OpenTrust Root CA G3"
  -  Adding:
  -   # Certificate "GlobalSign Root CA - R6"
  -   # Certificate "OISTE WISeKey Global Root GC CA"
  -   # Certificate "GTS Root R1"
  -   # Certificate "GTS Root R2"
  -   # Certificate "GTS Root R3"
  -   # Certificate "GTS Root R4"
  -   # Certificate "UCA Global G2 Root"
  -   # Certificate "UCA Extended Validation Root"
  -   # Certificate "Certigna Root CA"
  -   # Certificate "emSign Root CA - G1"
  -   # Certificate "emSign ECC Root CA - G3"
  -   # Certificate "emSign Root CA - C1"
  -   # Certificate "emSign ECC Root CA - C3"
  -   # Certificate "Hongkong Post Root CA 3"


author: David Howells <dhowells@redhat.com> 0.10.6-1
changelog:
  - Note the correct licence.
  - Handle malformed kernel status correctly.
  - Permit culling to be disabled on the command line with the -N flag.
  - Suspend culling when cache space is short and cache objects are pinned.


author: David Howells <dhowells@redhat.com> 0.10.8-1
changelog:
  - Use systemd interaction macros in specfile installation sections [RH BZ 850053].
  - Fix the service file to use /usr/sbin/ rather than /sbin/.
  - Turn on RELRO and PIE build hardening in RPM builds.


author: Brian Stinson <bstinson@centosproject.org> - 8-1.0.8
changelog:
  - Add base module platform Provides so DNF can auto-discover modular platform (ngompa)pr#6
  - Switched CR repo to mirrorlist to spread the load (arrfab)pr#5


author: bstinson@centosproject.org - 8-1.0.9
changelog:
  - Add the Devel repo to centos-release
  - Install os-release(5) content to /usr/lib and have /etc/os-release be a symlink (ngompa)pr#9


author: Pablo Greco <pgreco@centosproject.org> - 8-2.0.1
changelog:
  - Relax dependency for centos-repos
  - Remove update_boot, it was never used in 8
  - Add rootfs_expand to aarch64
  - Bump release for 8.2


author: Stephen Gallagher <sgallagh@redhat.com> - 80.1-2
changelog:
  - Separate desktop backgrounds into their own subpackage
  - Correct the description to match the license terms
  - Drop vestiges of fedora-logos


author: Ray Strode <rstrode@redhat.com> - 80.3-1
changelog:
  - Make night time pattern lighter
    Resolves: #1628092
  - Remove Alpha from logos
    Resolves: #1637446
  - Remove Alpha from wallpapers
    Resolves: #1636822


author: Alain Reguera Delgado <areguera@centosproject.org> - 80.5-2
changelog:
  - Add CentOS brands
  - Add CentOS backgrounds based on artistic motif sketch 4
  - Support rolling notes localization in CentOS installer


author: Lukáš Nykrýn <lnykryn@redhat.com> - 1.3.62-1
changelog:
  - use systemctl preset, not systemctl enable
  - fix typo in manpage
  - partly support socket activated services


author: Lukáš Nykrýn <lnykryn@redhat.com> - 1.4-1
changelog:
  - ntsysv: show systemd services and sockets
  - fix combination --type xinetd --list service
  - leveldb: restore selinux context for xinetd conf files
  - alternatives: remove unused variable
  - alternatives: warn if the target is not a symlink
  - spec: add link to git
  - lets simplify version


author: Lukáš Nykrýn <lnykryn@redhat.com> - 1.5-1
changelog:
  - add systemd-sysv-install alias
  - don't create symlinks if they already exist
  - fix wrongly behaving LDFLAGS


author: Lukáš Nykrýn <lnykryn@redhat.com> - 1.6-1
changelog:
  - systemd-sysv-install: don't play ping-pong with systemctl
  - ntsysv: add description to systemd services
  - ntsysv: skip templates
  - Makefile: fix typo


author: Lukáš Nykrýn <lnykryn@redhat.com> - 1.8-1
changelog:
  - alternatives: introduce --keep-missing
  - alternatives: allow family in --set and display it in --config
  - chkconfig: use isXinetdEnabled instead of isOn
  - leveldb: trim leading whitespaces from systemctl
  - leveldb: suppress error messages when selinux is turned off
  - alternatives: always recreate symlinks when the alternative is updated
  - test-alternatives: basic tests for slave links
  - chkconfig: resetpriorities should work on all runlevels


author: Lukas Nykryn <lnykryn@redhat.com> - 1.11-1
changelog:
  - Add tests for --add/remove-slave and use beakerlib
  - alternatives: add-slave and remove-slave
  - leveldb: don't crash on long names
  - alternatives: prettier --list output


author: Miroslav Lichvar <mlichvar@redhat.com> 3.2-2
changelog:
  - fix chronyc getting stuck in infinite loop after clock step
  - don't allow packaging without vendor zone
  - suggest ntp-refclock
  - remove obsolete dependency
  - update description


author: Miroslav Lichvar <mlichvar@redhat.com> 3.3-2
changelog:
  - move pidfile to /var/run/chrony to allow chronyd to remove it on exit
    (#1584585)
  - avoid blocking in getrandom system call (#1592425)


author: Miroslav Lichvar <mlichvar@redhat.com> 3.3-3
changelog:
  - fix PIDFile in local chronyd.service on upgrades from chrony < 3.3-2
    (#1614800)
  - add workaround for late reload of unit file (#1614751)


author: Miroslav Lichvar <mlichvar@redhat.com> 3.5-1
changelog:
  - update to 3.5 (#1685469 #1677218)
  - fix shellcheck warnings in helper scripts (#1711948)
  - update ntp2chrony script


author: David King <amigadave@amigadave.com> - 0.16-1
changelog:
  - Update to 0.16 (#1144863)
  - Remove clean section and BuildRoot tag
  - Update URL and Sourc0
  - Use license macro for COPYING
  - Use parallel make flags
  - Preserve timestamps during install


author: Jeff Layton <jlayton@redhat.com> - 6.7-5
changelog:
  - more updates, switch to rst for manpages
  - update mount.cifs manpage to describe defaults better (BZ#1474539)


author: Sachin Prabhu <sprabhu@redhat.com> - 6.8-3
changelog:
  - Add manual gating tests
  - docs: cleanup rst formating
  - mount.cifs.rst: document new (no)handlecache mount option
  - manpage: update mount.cifs manpage with info about rdma option
  - checkopts: add python script to cross check mount options
  - mount.cifs.rst: document missing options, correct wrong ones
  - checkopts: report duplicated options in man page
  - mount.cifs.rst: more cleanups
  - mount.cifs.rst: document vers=3 mount option
  - mount.cifs.rst: document vers=3.02 mount option
  - cifs: Allow DNS resolver key to expire
  - mount.cifs: be more verbose and helpful regarding mount errors
  - Update mount.cifs with vers=default mount option and SMBv3.0.2
  - mount.cifs.rst: update vers=3.1.1 option description
  - getcifsacl: Do not go to parse_sec_desc if getxattr fails.
  - getcifsacl: Improve help usage and add -h option.
  - setcifsacl: fix adding ACE when owner sid in unexpected location
  - cifs.upcall: fix a compiler warning
  - mount.cifs Add various missing parms from the help text
  - mount.cifs: add more options to help message
  - mount.cifs: detect GMT format of snapshot version
  - Update man page for mount.cifs to add new options
  - mount.cifs.rst: mention kernel version for snapshots
  - Fix authors and maintainers


author: Matej Marusak <mmmarusak@redhat.com> - 209-1
changelog:
  - New overview design
  - Session timeouts
  - Banners on login screen
  - Client certificate authentication
  - Dropped support for pam_rhost


author: Martin Pitt <mpitt@redhat.com> - 210-1
changelog:
  - Overview: Add CPU utilization to usage card
  - Dashboard: Support SSH identity unlocking when adding new machines
  - SElinux: Introduce an Ansible automation script
  - Translation updates (partially fixes rhbz#1754958)


author: Martin Pitt <mpitt@redhat.com> - 211-1
changelog:
  - Fix HTTPS requests > 4 KiB (rhbz#1785509)
  - Better support for various TLS certificate formats
  - Switch from Zanata to Weblate
  - Overview layout optimizations
  - Translation updates (rhbz#1754958)


author: Martin Pitt <mpitt@redhat.com> - 211.1-1
changelog:
  - system: Fix graph layout across all browsers (rhbz#1792623)
  - websocket: Fix unaligned access in send_prefixed_message_rfc6455()


author: Matej Marusak <mmarusak@redhat.com> - 211.2-1
changelog:
  - Users: Fix reboot warnings of changed roles
  - Translation updates (rhbz#1754958)
  - Fix CPU mitigations to recognize kernel options at the beginning of line


author: Kamil Dudka <kdudka@redhat.com> - 8.29-7
changelog:
  - add provides to coreutils-single to make it a drop-in replacement (#1572693)
  - reintroduce very old Provides (mktemp, sh-utils, textwrap, fileutils, stat)


author: Kamil Dudka <kdudka@redhat.com> - 8.29-8
changelog:
  - ls: increase the allowed abmon width from 5 to 12 (#1577872)
  - date, ls: pick strftime fixes from glibc to improve locale support (#1577872)


author: Kamil Dudka <kdudka@redhat.com> - 8.30-5
changelog:
  - sync: fix open() fallback bug (#1602463)
  - fix implicit declaration warning in coreutils-getgrouplist.patch (#1602463)


author: Ondrej Vasik <ovasik@redhat.com> - 2.11-36
changelog:
  - in 2015, file name in CVE-2014-9112 shows in a bit different timestamp
    format (fix FTBFS, #1239416)


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 2.9.6-8
changelog:
  - Python 2 binary package renamed to python2-cracklib
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: John W. Linville <linville@redhat.com> - 3.18_2016.02.08-1
changelog:
  - Update wireless-regdb to version 2016.02.08
  - Do not treat unused-const-variable warnings as errors


author: Stanislaw Gruszka <sgruszka@redhat.com> - 3.18_2018.05.31-2
changelog:
  - Update wireless-regdb to 2018.05.31
  - Remove python2 dependency
  - Use sforshee signed reulatory.bin (required by modern kernels)


author: Tomáš Mráz <tmraz@redhat.com> - 20190613-1.git21ffdc8
changelog:
  - openssh: add missing curve25519-sha256 to the key exchange list
  - openssh: fix RSA certificate support
  - fips-mode-setup: drop the kernel boot option if there is no separate
    /boot drive
  - fips-finish-install: regenerate all initramdisks
  - add libssh configuration backend


author: Tomáš Mráz <tmraz@redhat.com> - 20190613-2.git21ffdc8
changelog:
  - fix ownership of policy directories
  - nss: enable X25519 in appropriate policies and conflict with old nss
  - openssh: conflict with old incompatible openssh version


author: Tomáš Mráz <tmraz@redhat.com> - 20191022-1.gite17cc3a
changelog:
  - custom crypto policies support
  - update-crypto-policies: fix handling of list operations in policy modules
  - update-crypto-policies: fix updating of the current policy marker
  - fips-mode-setup: fixes related to containers and non-root execution
  - make it possible to use fips-mode-setup --check without dracut
  - add .config symlinks so a crypto policy can be set with read-only
    /etc by bind-mounting /usr/share/crypto-policies/<policy> to
    /etc/crypto-policies/back-ends
  - run the update-crypto-policies in posttrans


author: Ondrej Kozina <okozina@redhat.com> - 2.0.4-1
changelog:
  - Update to cryptsetup 2.0.4.
  - patch: Add RHEL system library paths in configure.
  - patch: Increase default LUKS2 header size to 8 MiBs.
  - patch: update tests to be compatible with larger headers.
  - Set default format to LUKS2.
  - Cleanup changelog.
  - Resolves: #1564540 #1595257 #1595266 #1595881 #1600164


author: Ondrej Kozina <okozina@redhat.com> - 2.0.4-2
changelog:
  - patch: fix device alignment bug when processing hinted
    value by device topology info.
  - Resolves: #1614219


author: Ondrej Kozina <okozina@redhat.com> - 2.0.6-1
changelog:
  - Update to cryptsetup 2.0.6
  - Enables all supported metadata sizes in LUKS2 validation code.
  - Resolves: #1653383


author: Ondrej Kozina <okozina@redhat.com> - 2.2.0-2
changelog:
  - patch: Fix mapped segments overflow on 32bit architectures.
  - patch: Take optimal io size in account with LUKS2 reencryption.
  - Resolves: #1742815 #1746532


author: Ondrej Kozina <okozina@redhat.com> - 2.2.2-1
changelog:
  - Update to cryptsetup 2.2.2
  - LUKS2 reencryption honors activation flags (one time and persistent).
  - LUKS2 reencryption works also without volume keys put in kernel
    keyring service.
  - Resolves: #1757783 #1750680 #1753597 #1743399

  - Resolves: #1742815 #1746532


author: Andreas Schneider <asn@redhat.com> - 4.11.2-4
changelog:
  - related: #1754409 - Add patch to avoid overlinking with libnsl and libsocket
  - related: #1754409 - Fix permissions for pidl
  - related: #1754409 - Fix logrotate script
  - related: #1754409 - Add missing README files


author: Alexander Bokovoy <abokovoy@redhat.com> - 4.11.2-10
changelog:
  - resolves: #1790353 - Fix access check in DsRGetForestTrustInformation
  - resolves: #1791209 - Fix CVE-2019-14907


author: Andreas Schneider <asn@redhat.com> - 4.11.2-12
changelog:
  - related: #1781232 - Improve debug output of smbclient
  - resolves: #1794461 - Do not return bogus inode numbers in
                         cli_qpathinfo2()/cli_qpathinfo3() for SMB1
  - resolves: #1794442 - Fix segfault in smbd_do_qfilepathinfo()


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-30
changelog:
  - 1774462 - CVE-2019-8675 - buffer overflow in SNMP and IPP, memory disclosure and DoS in scheduler
  - 1774463 - CVE-2019-8696


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-6
changelog:
  - SASL password overflow via integer overflow (CVE-2018-16839)
  - fix use-after-free in handle close (CVE-2018-16840)
  - fix bad arethmetic when outputting warnings to stderr (CVE-2018-16842)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-10
changelog:
  - fix SMTP end-of-response out-of-bounds read (CVE-2019-3823)
  - fix NTLMv2 type-3 header stack buffer overflow (CVE-2019-3822)
  - fix NTLM type-2 out-of-bounds buffer read (CVE-2018-16890)
  - xattr: strip credentials from any URL that is stored (CVE-2018-20483)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-12
changelog:
  - double free due to subsequent call of realloc() (CVE-2019-5481)
  - fix heap buffer overflow in function tftp_receive_packet() (CVE-2019-5482)
  - fix TFTP receive buffer overflow (CVE-2019-5436)


author: Simo Sorce <simo@redhat.com> - 2.1.27-0.4rc7
changelog:
  - Add patch form Upstream PR559 to use RC4 implementation from OpenSSL
  - Resolves bz#1618744
  - Fix multilib issue bz#1663120


author: Jeff Moyer <jmoyer@redhat.com> - 67-1.el8
changelog:
  - Rebase to v67.  This brings in the following features:
    - support for the 'security frozen' sysfs attribute
    - support for using pmem as system ram
    - various cleanup and bug fixes
  - Fix load-keys failure in initramfs (Jeff Moyer)
  - Resolves: bz#1724531 bz#1730673 bz#1741164 bz#1741165 bz#1749888 bz#1749889


author: David Herrmann <dh.herrmann@gmail.com> - 1:1.12.8-1
changelog:
  - Extract 'dbus-common' package from 'dbus-daemon' to provide XML configuration
    and setup files as independent package ready for alternative Message Bus
    implementations to be used.


author: David Herrmann <dh.herrmann@gmail.com> - 1:1.12.8-2
changelog:
  - Extract 'dbus-tools' package from 'dbus-daemon' to provide all command-line
    utilities independent of the actual message bus. They are valid to be used
    with independent message-bus implementations, so they should not needlessly
    pull in dbus-daemon.


author: Martin Pitt <mpitt@redhat.com>
changelog:
  - Drop unpublished -doc package to fix FTBFS rhbz#1640736
  - Add dist-git smoketest rhbz#1625683
  - Move dbus system user creation to correct package rhbz#1634496


author: David King <amigadave@amigadave.com> - 0.104-1
changelog:
  - Update to 0.104
  - Remove RPATH
  - Remove executable bit from sourced script
  - Move man page to main package and update glob
  - Make the build output more verbose


author: Till Maas <opensource@till.name> - 0.104-2
changelog:
  - Rebuilt for Fedora 23 Change
    https://fedoraproject.org/wiki/Changes/Harden_all_packages_with_position-independent_code


author: Marian Csontos <mcsontos@redhat.com> - 2.03.05-2
changelog:
  - Fix scanning of PVs with size not matching device.
  - Allow --stripe/--stripesize in mirror conversions.


author: Marian Csontos <mcsontos@redhat.com> - 2.03.05-3
changelog:
  - Remove unsupported OPTIONS+="event_timeout" udev rule from 11-dm-lvm.rules.
  - Prevent creating VGs with PVs with different logical block sizes.
  - Fix metadata writes from corrupting with large physical block size.


author: Marian Csontos <mcsontos@redhat.com> - 2.03.07-1
changelog:
  - Ensure minimum required region size on striped RaidLV creation.
  - Fix resize of thin-pool with data and metadata of different segtype.
  - Improve mirror type leg splitting.
  - Fix activation order when removing merged snapshot.
  - Experimental VDO support for lvmdbusd.
  - Correctly set read_ahead for LVs when pvmove is finished.
  - Add support for DM_DEVICE_GET_TARGET_VERSION into device_mapper.
  - Activate thin-pool layered volume as 'read-only' device.
  - Ignore crypto devices with UUID signature CRYPT-SUBDEV.
  - Synchronize with udev when dropping snapshot.
  - Add missing device synchronization point before removing pvmove node.
  - See WHATS_NEW for more.


author: Marian Csontos <mcsontos@redhat.com> - 2.03.08-1
changelog:
  - VDO and writecache volume improvements.
  - Prohibit reshaping of stacked raid LVs to prevent corruption.


author: Benjamin Marzinski <bmarzins@redhat.com> 0.7.8-6
changelog:
  - Fix multipath_conf_syntax CI test
    * need to wait for udev to settle before removing multipath device
  - Resolves: bz #1673167


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.0-1
changelog:
  - Update Source to upstream version 0.8.0
    * Previous patches 0001-0006 & 0015-0019 are included in this commit
  - Rename files
    * Previous patches 0007-0014 are now 0018-0025
    * Previous patches 0020-0023 are now 0001, 0006 & 0007
  - Add 0002-libmultipath-handle-existing-paths-in-marginal_path-.patch
  - Add 0003-multipathd-cleanup-marginal-paths-checking-timers.patch
  - Add 0004-libmultipath-fix-marginal-paths-queueing-errors.patch
  - Add 0005-libmultipath-fix-marginal_paths-nr_active-check.patch
  - Add 0008-libmutipath-continue-to-use-old-state-on-PATH_PENDIN.patch
  - Add 0009-multipathd-use-update_path_groups-instead-of-reload_.patch
  - Add 0010-multipath.conf-add-missing-options-to-man-page.patch
  - Add 0011-libmultipath-add-get_uid-fallback-code-for-NVMe-devi.patch
  - Add 0012-libmulitpath-cleanup-uid_fallback-code.patch
  - Add 0013-multipathd-handle-changed-wwids-by-removal-and-addit.patch
    * Multipath will now automatically remove and re-add paths if
      their wwid changes
  - Add 0014-multipathd-remove-wwid_changed-path-attribute.patch
  - Add 0015-multipathd-ignore-disable_changed_wwids.patch
    * Since paths are now getting removed and re-added there is
      no need to disable them.
  - Add 0016-multipathd-Don-t-use-fallback-code-after-getting-wwi.patch
  - Add 0017-libmultipath-silence-dm_is_mpath-error-messages.patch
  - Add 0026-RH-Fix-nvme-compilation-warning.patch
  - Add 0027-Fix-systemd-version-detection.patch
    * The above 16 patches have been submitted upstream
  - Add 0028-RH-attempt-to-get-ANA-info-via-sysfs-first.patch
    * Red Hat has a sysfs method to access the ANA state, which isn't
      upstream, and will not be. This will probably go away in the
      future.
  - Resolves: bz #1498546


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.0-2
changelog:
  - Add 0029-BZ-1700451-check-on-multipathd-without-starting-it.patch
  - Add 0030-BZ-1700451-test-socket-connection-in-non-blocking-mo.patch
    * the "multipath -u" call in 62-multipath.rules should no longer hang
      on multipathd startup.
  - Resolves: bz #1700451


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.0-3
changelog:
  - Add 0031-libmultipath-handle-clock_gettime-failures-in-tur-ch.patch
  - Add 0032-kpartx-fail-if-dup-of-dasd-file-descriptor-fails.patch
  - Add 0033-multipathd-fix-REALLOC_REPLY-with-max-length-reply.patch
  - Add 0034-multipathd-handle-NULL-return-from-genhelp_handler.patch
    * The above 4 patches have been submitted upstream
  - Related: bz #1498546


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.0-4
changelog:
  - Add 0035-BZ-1700911-hwtable-add-Lenovo-DE-series.patch
  - Add 0036-libmultipath-make-vector_foreach_slot_backwards-work.patch
    * Fix for bz #1713459
  - Fixes for bz #1666322 and #1669097 were included in 0.8.0 upstream
    code
  - Resolves: bz #1666322, #1669097, #1700911, #1713459


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.3-1
changelog:
  - Update Source to upstream version 0.8.3
    * This version includes the fixes for bz #1690515, #1703439,
        * Previous patches 0001-0017 & 0031-0036 are included in this version
  - Rename files
    * Previous patches 0018-0026 & 0028 are now 0004-0013
    * 0008-RH-add-mpathconf.patch has been modified to add a
      --property_blacklist option to fix bz #1753729
  - Add 0001-multipathd-warn-when-configuration-has-been-changed.patch
    * Multipath now logs a warning message when the configuration file
      has been changed to fix bz #1750594
  - Add 0002-libmultipath-fix-leak-in-foreign-code.patch
  - Add 0003-Fix-leak-in-mpathpersist.patch
    * The above 3 patches have been submitted upstream
  - Resolves: bz #1690515, #1703439, #1719562, #1747534, #1750594, #1753729


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.3-3
changelog:
  - Rename files
    * Previous patches 0004-0013 are now 0010-0019
    * 0014-RH-add-mpathconf.patch now makes mpathconf default to not
      printing foreign devices (bz #1760709)
  - Add 0004-libmultipath-remove-unused-path-prio_args.patch
  - Add 0005-libmultipath-constify-get_unaligned_be.patch
  - Add 0006-libmultipath-add-missing-hwe-mpe-variable-merges.patch
  - Add 0007-libmultipath-fix-sgio_get_vpd-looping.patch
  - Add 0008-libmultipath-add-vend_id-to-get_vpd_sgio.patch
  - Add 0009-libmultipath-add-code-to-get-vendor-specific-vpd-dat.patch
    * Add the '%g' maps and paths format wildcard, and the vpd_vendor
      multipath.conf devices section parameter. (bz #1527212)
  - Resolves: bz #1527212, #1760709


author: Marian Csontos <mcsontos@redhat.com> - 0.7.2-1
changelog:
  - Update to latest upstream release including various bug fixes and new features.
  - Fix segfault when dump tools are given a tiny metadata file.
  - Fix -V exiting with 1.
  - Fix thin_check when running on XML dump instead of binary data.
  - Speed up free block searching.


author: Marian Csontos <mcsontos@redhat.com> - 0.7.3-1
changelog:
  - Update to latest bugfix and documentation update release.
  - *_restore tools wipe superblock as a last resort.
  - Add thin_check --override-mapping-root.


author: Marian Csontos <mcsontos@redhat.com> - 0.8.5-3
changelog:
  - Remove obsolete pool-inactive option from thin_trim man page.
  - Check input file exists eralier, and prevent writing incorrect metadata.


author: Pavel Zhukov <pzhukov@redhat.com> - 12:4.3.6-33
changelog:
  - Resolves: #1673946 - Change default prefix length to 128
  - Add address-prefix-lenght option to change default value
  - Fix backporting issues


author: Ales Matej <amatej@redhat.com> - 4.2.11-1
changelog:
  - Update to 4.2.11
  - Improve modularity documentation (RhBug:1730162,1730162,1730807,1734081)
  - Fix detection whether system is running on battery (used by metadata caching timer) (RhBug:1498680)
  - New repoquery queryformat: %{reason}
  - Print rpm errors during test transaction (RhBug:1730348) 
  - Fix incorrectly marked profile and stream after failed rpm transaction check (RhBug:1719679)
  - Show transaction errors inside dnf shell (RhBug:1743644)
  - dnf-automatic now respects versionlock excludes (RhBug:1746562)
  - [doc] Add user_agent and countme options
  - [history] Don't store failed transactions as succeeded
  - [history] Do not require root for informative commands
  - [dnssec] Fix UnicodeWarning when using new rpm (RhBug:1699650)
  - Apply excludes before modular excludes (RhBug:1709453)
  - Improve help for command line arguments (RhBug:1659328)
  - Add new modular API method ModuleBase.get_modules
  - Mark features used by ansible, anaconda and subscription-manager as an API


author: Ales Matej <amatej@redhat.com> - 4.2.16-1
changelog:
  - Update to 4.2.16
  - Fix downloading local packages into destdir (RhBug:1727137)
  - Report skipped packages with identical nevra only once (RhBug:1643109)
  - Restore functionality of dnf remove --duplicates (RhBug:1674296)
  - Improve API documentation
  - Document NEVRA parsing in the man page
  - Do not wrap output when no terminal (RhBug:1577889)
  - Allow to ship alternative dnf.conf (RhBug:1752249)
  - Don't check if repo is expired if it doesn't have loaded metadata (RhBug:1745170)
  - Remove duplicate entries from "dnf search" output (RhBug:1742926)
  - Set default value of repo name attribute to repo id (RhBug:1669711)
  - Allow searching in disabled modules using "dnf module provides" (RhBug:1629667)
  - Group install takes obsoletes into account (RhBug:1761137)
  - Improve handling of vars
  - Do not load metadata for repolist commands (RhBug:1697472,1713055,1728894)
  - Fix messages for starting and failing scriptlets (RhBug:1724779)
  - Don't show older install-only pkgs updates in updateinfo (RhBug:1649383,1728004)
  - Add --ids option to the group command (RhBug:1706382)
  - Add --with_cve and --with_bz options to the updateinfo command (RhBug:1750528)


author: Ales Matej <amatej@redhat.com> - 4.2.17-2
changelog:
  - Update to 4.2.17
  - Enable versionlock for check-update command (RhBug:1750620)
  - Add error message when no active modules matched (RhBug:1696204)
  - Log mirror failures as warning when repo load fails (RhBug:1713627)
  - dnf-automatic: Change all systemd timers to a fixed time of day (RhBug:1754609)
  - DNF can use config from the remote location (RhBug:1721091)
  - [doc] update reference to plugin documentation (RhBug:1706386)
  - [yum compatibility] Report all packages in repoinfo
  - [doc] Add definition of active/inactive module stream
  - repoquery: Add a switch to disable modular excludes
  - Report more informative messages when no match for argument (RhBug:1709563)
  - [doc] Add description of excludes in dnf
  - Report more descriptive message when removed package is excluded
  - Add module repoquery command
  - Fix assumptions about ARMv8 and the way the rpm features work (RhBug:1691430)
  - Add Requires information into module info commands
  - Enhance inheritance of transaction reasons (RhBug:1672618,1769788)


author: Pavla Kratochvilova <pkratoch@redhat.com> - 4.2.17-3
changelog:
  - Do a substitution of variables in repo_id (RhBug:1748841)
  - Respect order of config files in aliases.d (RhBug:1680489)
  - [doc] Remove note about user-agent whitelist (RhBug:1777255)
  - Fix detection of the latest module (RhBug:1781769)


author: Ales Matej <amatej@redhat.com> - 4.2.17-4
changelog:
  - Fix alias processing with '\' escaping (RhBug:1680482)
  - [doc] Explain the backslash notation also near the example (RhBug:1680482)
  - Better descriptions for infinite aliases recursion (RhBug:1680488)
  - Improve help for 'dnf module' command (RhBug:1758447)
  - Unify downgrade exit codes with upgrade (RhBug:1759847)
  - Honor priority with check-update (RhBug:1769466)
  - Add shell restriction with local packages (RhBug:1773483)
  - Restore functionality of remove --oldinstallonly (RhBug:1774670)


author: Ales Matej <amatej@redhat.com> - 4.2.17-6
changelog:
  - Sort packages in transaction output by nevra (RhBug:1773436)
  - Add support of commandline packages by repoquery (RhBug:1784148)
  - [doc] Document that the include option was removed (RhBug:1786072)
  - New API function for setting loggers (RhBug:1788212)


author: Christopher Snyder <csnyder@redhat.com> 1.26.13-1
changelog:
  - 1754952: Update translations (csnyder@redhat.com)
  - cockpit: CSS fixes for dialog error messages (mvollmer@redhat.com)
  - cockpit: Update cockpit-component-dialog (mvollmer@redhat.com)


author: Pavla Kratochvilova <pkratoch@redhat.com> - 4.0.7-1
changelog:
  - Update to 4.0.7
  - Use improved config parser that preserves order of data
  - Fix: copr disable command traceback (RhBug:1693551)
  - [doc] state repoid as repo identifier of config-manager (RhBug:1686779)
  - [leaves] Show multiply satisfied dependencies as leaves
  - [download] Fix downloading an rpm from a URL (RhBug:1678582)
  - [download] Do not download src without ``--source`` (RhBug:1666648)
  - [download] Fix problem with downloading src pkgs (RhBug:1649627)
  - [download] Fix download of src when not the latest requested (RhBug:1649627)


author: Pavla Kratochvilova <pkratoch@redhat.com> - 4.0.8-1
changelog:
  - Update to 4.0.8
  - [reposync] Enable timestamp preserving for downloaded data (RhBug:1688537)
  - [reposync] Download packages from all streams (RhBug:1714788)
  - Make yum-copr manpage available (RhBug:1673902)
  - [needs-restarting] Add --reboothint option (RhBug:1192946) (RhBug:1639468)
  - Set the cost of ``_dnf_local`` repo to 500, to make it preferred to normal
    repos


author: Pavla Kratochvilova <pkratoch@redhat.com> - 4.0.8-2
changelog:
  - Update localizations from zanata (RhBug:1689984)
  - Rename dnf-utils to yum-utils (RhBug:1722093)
  - [builddep] Report all rpm errors (RhBug:1724668)
  - [config-manager] Behaviour of --setopt (RhBug:1702678)


author: Ales Matej <amatej@redhat.com> - 4.0.10-1
changelog:
  - Update to 4.0.10
  - debuginfo-install: Update both debuginfo and debugsource for updated package (RhBug:1586084)
  - copr: Support multilib repofiles (RhBug:1393664)
  - copr: Fix disable if copr instance has non-default port
  - copr: Fix repoid when using subdirectories in copr project


author: Ales Matej <amatej@redhat.com> - 4.0.11-1
changelog:
  - Update to 4.0.11
  - [spec] Specify attributes for ghost file (RhBug:1754463)
  - download: add the --debugsource option (RhBug:1637008)
  - Fix incorrect handling richdeps in buildep (RhBug:1756902)


author: Ales Matej <amatej@redhat.com> - 4.0.12-1
changelog:
  - Update to 4.0.12
  - [reposync] Add --urls option (RhBug:1686602)
  - [versionlock] Add --raw option (RhBug:1645564)
  - [doc] move manpages for plugins to "dnf-PLUGIN" (RhBug:1706386)
  - Add new plugin post-transaction-actions (RhBug:967264)
  - [builddep] Add --skip-unavailable switch (RhBug:1628634)
  - [versionlock] Don't apply excludes on @System (RhBug:1726712)
  - [reposync] Ignore only modular excludes (RhBug:1750273)


author: Ales Matej <amatej@redhat.com> - 4.0.12-2
changelog:
  - [config-manager] Allow use of --set-enabled without arguments (RhBug:1679213)
  - [reposync] Fix --delete with multiple repos (RhBug:1774103)
  - Redesign reposync --latest for modular system (RhBug:1775434)


author: Jaroslav Škarvada <jskarvad@redhat.com> - 4.0-1
changelog:
  - New version
    Resolves: rhbz#1333781
  - Switched to autotools
  - Various spec file cosmetic fixes (e.g. used optflags)


author: Lukas Nykryn <lnykryn@redhat.com> - 049-60.git20191129
changelog:
  - 99squash: Only start the cleaner on switch-root
  - net-lib: check if addr exists before checking for dad state
  - always include sg module


author: Lukas Nykryn <lnykryn@redhat.com> - 049-63.git20200114
changelog:
  - network-legacy/ifup: fix typo when calling dhclient --timeout
  - network-legacy/ifup: dhclient should be started in oneshot mode
  - modules/network-manager: Install `ip`


author: Lukas Nykryn <lnykryn@redhat.com> - 049-68.git20200211
changelog:
  - Revert "wait for IPv6 RA if using none/static IPv6 assignment"
  - dhclient-script: ipv6 uses different variables for nameservers
  - 40network: bump rd.net.timeout.carrier to 10 seconds


author: Josef Ridky <jridky@redhat.com> - 1:0.4-0.1.b45
changelog:
  - New upstream release 0.4b45 (#1361495)
  - Fix issue with bad UUID error message (#1048548)
  - Spec file has been updated


author: Lukas Czerner <lczerner@redhat.com> 1.45.4-1
changelog:
  - Rebase to the release 1.45.4 (#1783777)
  - provide rhel6/7 compatible fs_type in mke2fs.conf (#1780279)
  - fix crafted ext4 partition leads to out-of-bounds write (#1768709)
  - include note about supported rhel8 features and options (#1788573)


author: Mark Wielaard <mjw@fedoraproject.org> - 0.176-1
changelog:
  - New upstream release.
    - backends: riscv improved core file and return value location support.
    - Fixes CVE-2019-7146, CVE-2019-7148, CVE-2019-7149, CVE-2019-7150,
            CVE-2019-7664, CVE-2019-7665.


author: Mark Wielaard <mjw@redhat.com> - 0.178-2
changelog:
  - New upstream release.
    - debuginfod: New server, client tool and library to index and fetch
                  ELF/DWARF files addressed by build-id through HTTP.
    - doc: There are now some manual pages for functions and tools.
    - backends: The libebl libraries are no longer dynamically loaded
                through dlopen, but are now compiled into libdw.so directly.
    - readelf: -n, --notes now takes an optional "SECTION" argument.
               -p and -x now also handle section numbers.
               New option --dyn-sym to show just the dynamic symbol table.
    - libcpu: Add RISC-V disassembler.
    - libdw: Abbrevs and DIEs can now be read concurrently by multiple
             threads through the same Dwarf handle.
    - libdwfl: Will try to use debuginfod when installed as fallback to
               retrieve ELF and DWARF debug data files by build-id.
  - Fix libdebuginfod file list for debuginfo-client[-devel].


author: Mark Wielaard <mjw@redhat.com> - 0.178-4
changelog:
  - Add elfutils-debuginfod-client Provides and Requires with depsuffix
    to get multilib dependencies correct. Add %{version}-%{release} to
    keep subpackages in sync.


author: Jan Synáček <jsynacek@redhat.com> - 4.1.1-1
changelog:
  - Update to 4.1.1 (#1546450, #1139165, #1545369)
    + Big thanks to Xavier Delaruelle for a spec patch!


author: Chris Leech <cleech@redhat.com> - 1.0.32-6
changelog:
  - remove fcoe from SUPPORTED_DRIVERS in /etc/sysconfig/fcoe
  - add qedf to SUPPORTED_DRIVERS in /etc/sysconf/fcoe
  - added upstream fix for large fcoe ctrl numbers


author: Kamil Dudka <kdudka@redhat.com> - 5.33-4
changelog:
  - do not classify shared libraries as pie executables (#1581343)
  - seccomp: fix build failure due to missing syscalls


author: Kamil Dudka <kdudka@redhat.com> - 5.33-7
changelog:
  - show details about ppc swap partition (#1224668)
  - support longer version strings for clamav database (#1539107)


author: Kamil Dudka <kdudka@redhat.com> - 5.33-11
changelog:
  - improve documentation of --apple in file(1) man page (#1677442)
  - improve parsing of ppc core files (#1658171)


author: Ondrej Vasik <ovasik@redhat.com> - 3.6-1
changelog:
  - own /usr/share/bash-completion{,/completions,/helpers} (#1504616)
  - create and own /usr/lib/debug/.dwz dir to prevent
    dangling symlink (#1508610)


author: Ondrej Vasik <ovasik@redhat.com> - 3.7-1
changelog:
  - own /usr/share/locale and /usr/lib/modules
  - own /usr/lib/sysimage
  - improve filesystem content file to include symlinks and rootdir


author: Tomas Mraz <tmraz@redhat.com> - 1.2.0-1
changelog:
  - add lib subpackage to avoid multilib on the base package
  - add ability to compute hmacs on multiple files at once
  - improved debugging with FIPSCHECK_DEBUG


author: Eric Garver <egarver@redhat.com> - 0.7.0-3
changelog:
  - backport patch to show service includes in service output
  - backport patches to fix dbus API break


author: Akira TAGOH <tagoh@redhat.com> - 2.13.0-6
changelog:
  - Add Suggests: dejavu-sans-fonts to address pulling the unpredicted
    font package as dependency. (#1321551)


author: Akira TAGOH <tagoh@redhat.com> - 2.13.1-3
changelog:
  - Stop cleaning up .uuid file even when a directory is empty.
    resolves: rhbz#1653171
  - Use Rachana instead of Meera for serif subsitution.
    resolves: rhbz#1650491


author: Josef Ridky <jridky@redhat.com> - 1.5.6-1
changelog:
  - New upstream release 1.5.6 (#1468062)
  - Fix issue with capital letters in commands in manpage (#1468984)


author: Richard Hughes <richard@hughsie.com> 1.1.3-1
changelog:
  - New upstream release
  - Adds support for an upcoming Dell USB-C dock
  - Don't use an obsolete font when building the UEFI images
  - Resolves: #1607842


author: Richard Hughes <richard@hughsie.com> 1.1.4-1
changelog:
  - New upstream release
  - Use HTTPS_PROXY if set
  - Make the dell-dock plugin more robust in several ways
  - Adjust EVB board handling
  - Resolves: #1647557


author: Charles R. Anderson <cra@wpi.edu> - 2008_10_13-10
changelog:
  - Patch to apply CFLAGS/LDFLAGS to final link so RPM_OPT_FLAGS are picked up (rhbz#1548426)
  - Use CC=gcc explicitly
  - Regenerate fxload-noa3load.patch


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 4.1.4-7
changelog:
  - Revert previous change of adding 'awk*' symlinks for info pages (bug #1486924)
  - Added patch to correctly fix the info pages issue (bug #1486924)
  - specfile content refactored for better readability
  - Package now provides its ABI version via gawk(abi)
  - Added test for usage of correct gawk(abi) into %check section


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 4.2.0-1
changelog:
  - Update to latest stable release from upstream [new API version - 2.0]
  - Added latest relevant patches from upstream's gawk-4.2-stable branch


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 4.2.0-2
changelog:
  - 'noarch' removed from *-devel subpackage
  - added arch requirement for *-devel subpackage
  - updated the build process to use %make_build macro


author: Andrew Price <anprice@redhat.com> - 3.2.0-2
changelog:
  - fsck.gfs2: Don't check fs formats we don't recognise
  - libgfs2: Fix pointer cast byte order issue
    Resolves: rhbz#1622050


author: Sunil Kumar Acharya <sheggodu@redhat.com> - 6.0-12
changelog:
  - fixes bugs bz#1730914 bz#1731448 bz#1732770 bz#1732792 bz#1733531 
    bz#1734305 bz#1734534 bz#1734734 bz#1735514 bz#1737705 bz#1732774
    bz#1732793


author: Sunil Kumar Acharya <sheggodu@redhat.com> - 6.0-14
changelog:
  - fixes bugs bz#1719171 bz#1728673 bz#1731896 bz#1732443 bz#1733970 
    bz#1745107 bz#1746027 bz#1748688 bz#1750241 bz#1572163


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 1:6.1.2-3
changelog:
  - Build process updated to correctly build .debug_info for i386
    and to correctly use hardening flags


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 1:6.1.2-8
changelog:
  - Missing fipschecks added into build process (bug #1553679)
  - --enable-fat option added to %configure (bug #1493218)


author: Jakub Martisko <jamartis@redhat.com> - 1:6.1.2-9
changelog:
  - Add support for intel CET and -fcf-protection
  - Add missing compiler/linker flags
  Related: #1630567


author: Daiki Ueno <dueno@redhat.com> - 3.6.8-6
changelog:
  - Treat login error more gracefully when enumerating PKCS#11 tokens (#1705478)
  - Use deterministic ECDSA/DSA in FIPS selftests (#1716560)
  - Add gnutls_aead_cipher_{encrypt,decrypt}v2 functions (#1684461)


author: Daiki Ueno <dueno@redhat.com> - 3.6.8-9
changelog:
  - Fix CFB8 decryption when repeatedly called (#1757848)
  - Fix gnutls_aead_cipher_{en,de}cryptv2 with input not multiple of block size (#1757856)


author: Kalev Lember <klember@redhat.com> - 1.55.2-1
changelog:
  - Update to 1.55.2
  - Drop /usr/bin/env shebang patch as the brp scripts now handle this correctly
  - Remove ldconfig scriptlets


author: Javier Martinez Canillas <javierm@redhat.com> - 2.02-80
changelog:
  - Fix PRIxGRUB_EFI_STATUS definition
    Related: rhbz#1761811
  - TPM: Print messages if measuraments fail as debug instead of error
    Resolves: rhbz#1761811
  - unix/platform: Initialize variable to fix grub-install on UEFI system
    Resolves: rhbz#1768689
  - blscfg: add a space char when appending fields for variable expansion
    Resolves: rhbz#1669252


author: Javier Martinez Canillas <javierm@redhat.com> - 8.40-29
changelog:
  - grubby-bls: print the absolute kernel and initramfs images paths
    Resolves: rhbz#1649778
  - grubby-bls: make info print the root parameter if is present in cmdline
    Resolves: rhbz#1649791


author: Javier Martinez Canillas <javierm@redhat.com> - 8.40-31
changelog:
  - grubby-bls: allow to specify the same kernel param multiple times
    Resolves: rhbz#1652486
  - grubby-bls: expand kernel options if these are environment variables
    Resolves: rhbz#1649785
  - grubby-bls: always generate the BLS snippets when adding new entries
    Resolves: rhbz#1653365
  - Improve man page for --info option (jstodola)
    Resolves: rhbz#1651672


author: Javier Martinez Canillas <javierm@redhat.com> - 8.40-37
changelog:
  - grubby-bls: unset default entry if is the one being removed
    Resolves: rhbz#1668329
  - grubby-bls: error if args or remove-args is used without update-kernel
    Related: rhbz#1690765
  - grubby-bls: make --update-kernel ALL to update kernelopts var in grubenv
    Resolves: rhbz#1690765
  - grubby-bls: fix --add-kernel not working when using the --args option
    Related: rhbz#1690765


author: Javier Martinez Canillas <javierm@redhat.com> - 8.40-38
changelog:
  - grubby-bls: don't print rpm-sort error messages
    Resolves: rhbz#1731924
  - grubby-bls: remove -o option and support -c for ppc64le grub config
    Resolves: rhbz#1758598
  - grubby-bls: fix logic to check if the kernelopts var is defined in a BLS
    Resolves: rhbz#1726514
  - grubby-bls: don't update grubenv when generating grub.cfg for ppc64le
    Related: rhbz#1726514


author: Jakub Martisko <jamartis@redhat.com> - 1.9-5
changelog:
  - Fix wrong skip size in gzexe
  - Add new test dealing with the ^^ (needs autoreconf)
  - Enable make check (needs less)
    Resolves: 1705413

   * Tue Aug 07 2018 Jakub Martisko <jamartis@redhat.com> - 1.9-4
   - Fix FTBFS bug (gnulib problems)
   - more details: https://lists.gnu.org/r/bug-gnulib/2018-03/msg00000.html
     Resolves 1611722


author: Francisco Javier Tsao Santín <tsao@gpul.org> - 1:1.3-1
changelog:
  - Patch by Todd Lewis that adds option -x to exclude files with pcre lib 
  - This patch solves RH Bugzilla ID's 955246 1322198


author: Tomasz Kłoczko <kloczek@fedoraproject.org> - 1:1.3-4
changelog:
  - remove manually added pcre2 requires (this is autogenerated)
  - removed BuildRoot, %defattr() and Group (new Fedora Packaging Guildline)
  - do not use straight gcc and add use %{__global_ldflags}
  - use %_licensedir is no longer needed
  - minor cleanups:
  -- reformat %description to 80 col
  -- added full URLs in Source fields
  -- more macros
  -- a bit simpler %prep


author: Michal Schmidt <mschmidt@redhat.com> - 1.11.8-3
changelog:
  - BuildRequire rdma-core-devel on s390(x).
  - Install the hwloc-dump-hwdata.service systemd service on x86/x86_64.


author: Michal Schmidt <mschmidt@redhat.com> - 1.11.9-1
changelog:
  - Update to 1.11.9.
  - BuildRequire gcc, gcc-c++. Drop Group tags.
  - BuildRequire numactl-devel on s390x too.


author: Jarod Wilson <jarod@redhat.com> - 22.3-1
changelog:
  - Update to upstream v22.3 stable release for fixes
  - Enable support for Broadcom 57500 hardware
  - Enable support for Mellanox ConnectX-6 DX hardware
  - Resolves: rhbz#1678276
  - Resolves: rhbz#1687435


author: Jarod Wilson <jarod@redhat.com> - 26.0-2
changelog:
  - Add Obsoletes/Provides pair for infiniband-diags-devel
  - Pull in upstream stable-v26 branch patches
  - Fix %postun scriptlet failures by removing superfluous -p options
  - Add new BuildRequires: on pandoc
  - Related: rhbz#1722257


author: Mike FABIAN <mfabian@redhat.com> - 60.2-4
changelog:
  - Add negative-daylight-savings.patch from upstream.
    (see http://bugs.icu-project.org/trac/ticket/13566 and
    http://bugs.icu-project.org/trac/changeset/40954)


author: Parag Nemade <pnemade AT redhat DOT com> - 60.2-7
changelog:
  - Resolves:rh#1602551 - Fix specfile by adding compile options
  - also add BuildRequires for gcc and gcc-c++
  - Correct the upstream URL


author: Mike FABIAN <mfabian@redhat.com> - 60.3-1
changelog:
  - Update to 60.3 maintenance release including support for new Japanese era Reiwa (令和).
  - Resolves: rhbz#1677093


author: Mike FABIAN <mfabian@redhat.com> - 60.3-2
changelog:
  - Apply ICU-13634-Adding-integer-overflow-logic-to-ICU4C-num.patch
  - Apply ICU-20958-Prevent-SEGV_MAPERR-in-append.patch
  - Resolves: rhbz#1808238


author: Bruno E. O. Meneguele <brdeoliv@redhat.com> - 1.0-1
changelog:
  - New upstream release
  - Add OpenSSL 1.0 compatibility package, due to issues with OpenSSL 1.1
  - Remove libtool files
  - Run ldconfig after un/installation to update *.so files
  - Add -devel subpackage to handle include files and examples


author: Bruno E. O. Meneguele <brdeoliv@redhat.com> - 1.0-2
changelog:
  - Adjusted docbook xsl path to match the correct stylesheet
  - Remove only *.la files, considering there aren't any *.a files


author: Bruno E. O. Meneguele <brdeoliv@redhat.com> - 1.0-3
changelog:
  - Add OpenSSL 1.1 API support for the package, avoiding the need of
    compat-openssl10-devel package


author: Bruno E. O. Meneguele <brdeoliv@redhat.com> - 1.1-1
changelog:
  - New upstream release
  - Support for OpenSSL 1.1 was added directly to the source code in upstream,
    thus removing specific patch for it
  - Docbook xsl stylesheet updated to a local path


author: Bruno E. O. Meneguele <brdeoliv@redhat.com> - 1.1-2
changelog:
  - Remove libtool files
  - Run ldconfig scriptlets after un/installing
  - Add -devel subpackage to handle include files and examples
  - Disable any static file in the package


author: Bruno E. O. Meneguele <bmeneg@redhat.com> - 1.1-3
changelog:
  - Solve memory leaks pointed by covscan tool
  - Add optimization flag O2 during compilation to satisfy annocheck tool


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 6.4-2
changelog:
  - Fix broken reference following when the reference is split to
    more than one line
  - Fix possible incorrect selection of already loaded file when
    following cross reference
    Resolves: #1383057


author: Petr Pisar <ppisar@redhat.com> - 6.4-3
changelog:
  - perl dependency renamed to perl-interpreter
    <https://fedoraproject.org/wiki/Changes/perl_Package_to_Install_Core_Modules>


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 9.83-1
changelog:
  - network-scripts: Add previously dropped error checking
  - network-scripts: Replace brctl with ip-link
  - Makefile: new release-commit rule added
  - src/rename_device.c: GCC warnings about unused return value suppressed
  - src/usernetctl.c: GCC warnings about unused return value suppressed
  - Makefile: allow sub-makefiles to run in parallel
  - specfile: netconsole service moved to /usr/libexec
  - specfile: services from /usr/lib/systemd moved to /usr/libexec
  - specfile: summary & description updated
  - specfile: no longer needed conflicts dropped
  - specfile: requirements cleanup
  - specfile: obsoletes on previous version of initscripts package added
  - specfile: network-scripts subpackage created
  - specfile: readonly-root subpackage created
  - specfile: netconsole-service subpackage created
  - README.md: Travis CI build icon added
  - .travis.yml: check the 'make install' proceeds as well
  - .travis.yml: initial commit
  - README.md: bug reporting described
  - README.dm: future of initscripts described
  - README.md: description added
  - README.md: references to old git branches added
  - README.md: initial commit
  - network-scripts: setting of firewall ZONE fixed
  - ifdown-post: artifact whitespace removed from the DBus call
  - l10n: drop .tx directory
  - l10n: add zanata.xml


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 10.00-1
changelog:
  - Move the /etc/rwtab.d & /etc/statetab.d folders to 'filesystem'
  - specfile: fix failing build because of incorrect use of (ppc-64)


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 10.00.1-1
changelog:
  - consoletype/genhostid/usleep: allow disabling of deprecation warnings
  - network/ifup/ifdown: allow disabling of deprecation warnings
  - network/ifup/ifdown: deprecation warnings for 'network-scripts' added


author: Jan Macku <jamacku@redhat.com> - 10.00.3-1
changelog:
  - rc.d/functions: fix escape sequence being output under systemd service units
  - Replace not working awk command with sed


author: Jan Macku <jamacku@redhat.com> - 10.00.5-1
changelog:
  - network-function: bridges are created by ifup-eth
  - network: don't fail with IFDOWN_ON_SHUTDOWN
  - Add ip6gre tunnel option
  - ifup-eth: Check that device name is set
  - Initscripts no longer care about rc.local


author: Charalampos Stratakis <cstratak@redhat.com> - 0.6-10
changelog:
  - SPEC file cleanup
  - Added licence tag
  - Removal of old and unneeded macros
  - Use of newest python macros
  - Removed Python 2 dependency
  - Added patch for Python 3 build


author: Phil Sutter <psutter@redhat.com> [4.18.0-7.el8]
changelog:
  - ip-route: Fix nexthop encap parsing (Phil Sutter) [1625358]
  - man: ip-route.8: Document nexthop limit (Phil Sutter) [1625358]


author: Phil Sutter <psutter@redhat.com> [4.18.0-11.el8]
changelog:
  - tc: m_tunnel_key: Add tunnel option support to act_tunnel_key (Phil Sutter) [1654761]
  - tc: f_flower: add geneve option match support to flower (Phil Sutter) [1654761]
  - l2tp: Fix printing of cookie and peer_cookie values (Phil Sutter) [1643805]


author: Andrea Claudi <aclaudi@redhat.com> [4.18.0-12.el8]
changelog:
  - devlink: Add param command support (Andrea Claudi) [1663199]
  - rdma: Fix representation of PortInfo CapabilityMask (Andrea Claudi) [1664694]
  - uapi: update ib_verbs (Andrea Claudi) [1664694]
  - tc: flower: Add support for QinQ (Andrea Claudi) [1615928]
  - ip rule: Add ipproto and port range to filter list (Andrea Claudi) [1678111]


author: Andrea Claudi <aclaudi@redhat.com> [4.18.0-13.el8]
changelog:
  - ip-xfrm: Respect family in deleteall and list commands (Andrea Claudi) [1656717]
  - Update kernel headers (Andrea Claudi) [1716361]
  - uapi: update bpf header (Andrea Claudi) [1716361]
  - uapi: update headers to 4.20-rc1 (Andrea Claudi) [1716361]
  - bpf: add btf func and func_proto kind support (Andrea Claudi) [1716361]
  - lib/bpf: fix build warning if no elf (Andrea Claudi) [1716361]
  - bpf: initialise map symbol before retrieving and comparing its type (Andrea Claudi) [1716361]
  - Include bsd/string.h only in include/utils.h (Andrea Claudi) [1716361]
  - Use libbsd for strlcpy if available (Andrea Claudi) [1716361]
  - bpf: check map symbol type properly with newer llvm compiler (Andrea Claudi) [1716361]
  - bpf: implement btf handling and map annotation (Andrea Claudi) [1716361]
  - bpf: implement bpf to bpf calls support (Andrea Claudi) [1716361]
  - bpf: remove strict dependency on af_alg (Andrea Claudi) [1716361]
  - bpf: move bpf_elf_map fixup notification under verbose (Andrea Claudi) [1716361]
  - iplink: add support for reporting multiple XDP programs (Andrea Claudi) [1716361]
  - rdma: Document IB device renaming option (Andrea Claudi) [1663228]
  - rdma: Add an option to rename IB device interface (Andrea Claudi) [1663228]
  - rdma: Introduce command execution helper with required device name (Andrea Claudi) [1663228]
  - rdma: Update kernel include file to support IB device renaming (Andrea Claudi) [1663228]
  - libnetlink: Convert GETADDR dumps to use rtnl_addrdump_req (Andrea Claudi) [1716772]


author: Andrea Claudi <aclaudi@redhat.com> [4.18.0-15.el8]
changelog:
  - netns: make netns_{save,restore} static (Andrea Claudi) [1719759]
  - ip vrf: use hook to change VRF in the child (Andrea Claudi) [1719759]
  - netns: switch netns in the child when executing commands (Andrea Claudi) [1719759]
  - m_mirred: don't bail if the control action is missing (Andrea Claudi) [1711760]
  - tc: introduce support for chain templates (Andrea Claudi) [1710291]
  - ip: reset netns after each command in batch mode (Andrea Claudi) [1671016]


author: Stefano Brivio <sbrivio@redhat.com> - 6.38-3
changelog:
  - Fix loading of sets with dependencies on other sets (RHBZ#1647096), and
    hardcode 6.38-1.el7 for ipset-service upgrade and downgrade triggers, so that
    we don't run into issues with z-stream updates


author: Stefano Brivio <sbrivio@redhat.com> - 7.1-1
changelog:
  - Rebase to 7.1 (RHBZ#1649090):
    - Add compatibility support for strscpy()
    - Correct the manpage about the sort option
    - Add missing functions to libipset.map
    - configure.ac: Fix build regression on RHEL/CentOS/SL (Serhey Popovych)
    - Implement sorting for hash types in the ipset tool
    - Fix to list/save into file specified by option (reported by Isaac Good)
    - Introduction of new commands and protocol version 7, updated kernel include files
    - Add compatibility support for async in pernet_operations
    - Use more robust awk patterns to check for backward compatibility
    - Prepare the ipset tool to handle multiple protocol version
    - Fix warning message handlin
    - Correct to test null valued entry in hash:net6,port,net6 test
    - Library reworked to support embedding ipset completely
    - Add compatibility to support kvcalloc()
    - Validate string type attributes in attr2data() (Stefano Brivio)
    - manpage: Add comment about matching on destination MAC address (Stefano Brivio)
      (RHBZ#1649079)
    - Add compatibility to support is_zero_ether_addr()
    - Fix use-after-free in ipset_parse_name_compat() (Stefano Brivio) (RHBZ#1649085)
    - Fix leak in build_argv() on line parsing error (Stefano Brivio) (RHBZ#1649085)
    - Simplify return statement in ipset_mnl_query() (Stefano Brivio) (RHBZ#1649085)
    - tests/check_klog.sh: Try dmesg too, don't let shell terminate script (Stefano Brivio) 
  - Fixes:
    - Fix all shellcheck warnings in init script (RHBZ#1649085)
    - Make error reporting consistent, introduce different severities (RHBZ#1683711)
    - While restoring, on invalid entries, remove them and retry (RHBZ#1683713)
    - Fix covscan SC2166 warning in init script (RHBZ#1649085)


author: Phil Sutter <psutter@redhat.com> - 1.8.4-3
changelog:
  - Reduce globbing in library file names to expose future SONAME changes
  - Add bootstrapping for libip*tc SONAME bump


author: Phil Sutter <psutter@redhat.com> - 1.8.4-8
changelog:
  - xtables-translate: Fix for iface++
  - tests: shell: Fix skip checks with --host mode
  - xtables-restore: fix for --noflush and empty lines


author: Phil Cameron <pcameron@redhat.com> - 1.1.4-16
changelog:
  - Moved upstream from https://fedorahosted.org/iptraf-ng/ to 
    https://github.com/iptraf-ng/iptraf-ng/ with release v1.1.4
    Fixes error in patch Patch03 - this fixes 1283773


author: Thomas Woerner <twoerner@redhat.com> 2.2.6-1
changelog:
  - New upstream version 2.2.6
    - Located at github
    - Fixes (RHBZ#1294913 and RHBZ#1375395)
  - Additional upstream patch (no_debug) to drop some debugging remains
  - Additional proposed patch to fix segmentation fault with -1 -C (RHBZ#599181)


author: Kairui Song <kasong@redhat.com> 2:1.4.0-2
changelog:
  - Fix several memleak problems found by covscan (bz1606969)
  - Fix an possible overflow error (bz1606969)
  - Don't leak socket fd on connection error (bz1606969)
  - Check xen-dyn-event more flexible (bz1576164)


author: Kairui Song <kasong@redhat.com> 2:1.4.0-3
changelog:
  - Update document and remove dead options to fix manpage scan warning (bz1612706)
  - Fix gating test error (bz1680619)


author: Chris Leech <cleech@redhat.com> - 6.2.0.876-5.gitf3c8e90
changelog:
  - iscsiuio: add mutex to protect netlink buffer for pass-through xmit
  - iscsid: get gateway information from sysfs when recovering sessions
  - enabled MaxOustandingR2T negotiation during login


author: Chris Leech <cleech@redhat.com> - 6.2.0.878-0.gitd791ce0
changelog:
  - 1761940 iSCSI CHAP authentication not function with FIPS enabled
  - Service file improvements forward ported from RHEL 7.8
  - various static analysis fixes from upstream


author: Chris Leech <cleech@redhat.com> - 0.94-1
changelog:
  - new upstream location, update to 0.94
  - new devel package, upstream open-iscsi is dropping it's internal copy


author: Herton R. Krzesinski <herton@redhat.com> - 20181011-88.gitc6b6265d
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Include latest firmware for Nvidia Graphics (rhbz 1504667)


author: Herton R. Krzesinski <herton@redhat.com> - 20181015-89.gitc6b6265d
changelog:
  - Remove liquidio/lio_23xx_vsw.bin from linux-firmware until GPL violation is
    fully resolved (rhbz 1637694)


author: Herton R. Krzesinski <herton@redhat.com> - 20181109-90.git1baa3486
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Include BPF version of Netronome firmware (rhbz 1637558)


author: Herton R. Krzesinski <herton@redhat.com> - 20190516-94.git711d3297
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Update iwlwifi firmware to support the Cyclone Peak Dual Band 2x2 802.11ax (rhbz 1622442)
  - Pull new version of Netronome firmware (rhbz 1663989)
  - Update firmware for Chelsio T4/T5/T6 adapters (rhbz 1664678)
  - Update Netronome firmware that include bug fixes (rhbz 1673890)
  - Include firmware support for Intel Bluetooth 22261 (rhbz 1678095)


author: Bruno Meneguele <bmeneg@redhat.com> - 20191202-95.gite8a0f4c9
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Update qed zipped/unzipped firmware to latest upstream (rhbz 1720394)
  - Update bnx2x firmware to latest upstream (rhbz 1720395)
  - AX200(Cyclone Peak 2 or CcP2) Bluetooth support (rhbz 1722693)
  - Firmware for Chelsio T4/T5/T6 adapters (rhbz 1725821)
  - Include to support Intel AX201 Harrison Peak(CNVi) on CML-U (rhbz 1725873)
  - Icelake Bluetooth firmware update (AX201, Harrison Peak, or HrP2) (rhbz 1726182)
  - DDP Package to support Columbiaville NIC (rhbz 1726454)
  - Add iwlwifi-cc-a0-48.ucode to linux-firmware (rhbz 1753962)
  - Change install section to use usptream installation process


author: Xin Long <lxin@redhat.com> - 2.11-3
changelog:
  - Deal with warnings under gcc 8
  - Call va_end after va_copy in json_vsprintf
  - Fix bogus date in jansson.spec


author: Björn Esser <besser82@fedoraproject.org> - 0.13-3
changelog:
  - Add upstream patch for adding size_t json_c_object_sizeof()
  - Enable partial multi-threaded support


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-5
changelog:
  - Don't execute final_action if failure_action terminates the system
  - module-setup: re-fix 99kdumpbase network dependency
  - kdumpctl: bail out immediately if host key verification failed
  - kdumpctl: echo msg when waiting for connection
  - kdumpctl: distinguish the failed reason of ssh
  - kdumpctl: wait a while for network ready if dump target is ssh
  - dracut-module-setup: filter out localhost for generic_fence_kdump
  - dracut-module-setup: get localhost alias by manual


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-6
changelog:
  -rhel-8.2.0, origin/rhel-8.2.0) Increase SECTION_MAP_LAST_BIT to 4
  - spec: move binaries from /sbin to /usr/sbin
  - As /etc/kdump.conf timestamp is updated do not compare it when doing rpm --verify
  - kdumpctl: make reload fail proof


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-10
changelog:
  - arm64: kdump: deal with a lot of resource entries in /proc/iomem
  - arm64: kexec: allocate memory space avoiding reserved regions
  - kexec: add variant helper functions for handling memory regions


author: David Howells <dhowells@redhat.com> - 1.5.9-1
changelog:
  - Add manpages for get_persistent.
  - Fix memory leaks in keyctl_describe/read/get_security_alloc().
  - Use keyctl_describe_alloc in dump_key_tree_aux rather than open coding it.
  - Exit rather than returning from act_xxx() functions.
  - Fix memory leak in dump_key_tree_aux.
  - Only get the groups list if we need it.
  - Don't trust sscanf's %n argument.
  - Use the correct path macros in the specfile.
  - Avoid use realloc when the memory has no content.
  - Fix a bunch of issues in key.dns_resolver.
  - Fix command table searching in keyctl utility.
  - Fix a typo in the permissions mask constants.
  - Improve the keyctl_read manpage.
  - Add man7 pages describing various keyrings concepts.


author: David Howells <dhowells@redhat.com> - 1.5.10-1
changelog:
  - Include sys/types.h in keyutils.h.
  - The dns resolver needs limits.h.
  - Overhaul of all manual pages.
  - Some manual pages moved to Linux man-pages project.
  - Add Diffie-Helman keyctl function.


author: Yauheni Kaliuta <ykaliuta@redhat.com> - 25-7
changelog:
  - weak-modules: use is_kernel_installed wrapper in update_modules_for_krel.
  - weak-modules: more abstract symvers search implementation.
  - weak-modules: use additional paths for System.map file.
    Resolves: rhbz#1621306.


author: Yauheni Kaliuta <ykaliuta@redhat.com> - 25-8
changelog:
  - weak-modules: fix initial state creation for dry-run
  - weak-modules: check compatibility in a temporary directory
    Resolves: rhbz#1622990.


author: Yauheni Kaliuta <ykaliuta@redhat.com> - 25-10
changelog:
  - weak-modules: group modules on add-kernel
  - weak-modules: do not make groups if there are no extra modules
    Resolves: rhbz#1649211


author: Yauheni Kaliuta <ykaliuta@redhat.com> - 25-16
changelog:
  - weak-modules: update_modules_for_krel: always finish sandbox
  - weak-modules: groupping: use dependencies of extra/ provider
    Resolves: rhbz#1778889


author: - Andy Walsh <awalsh@redhat.com> - 6.2.2.18-57
changelog:
  - Reduced the default number of index zones as the previous default
    attempted to maximize index performance at the expense of all other
    processes.
  - Resolves: rhbz#1703507
  - Fixed an assertion when resuming a VDO device which was not suspended
    with the no-flush flag.
  - Resolves: rhbz#1752893


author: - Andy Walsh <awalsh@redhat.com> - 6.2.2.117-63
changelog:
  - Fixed a bug which would cause the UDS index to be perceived as corrupt
    when a VDO volume is moved to a system with a different endianness.
  - Resolves: rhbz#1745211
  - Modified UDS index rebuild to be interruptible so that shutting down a
    VDO whose index is rebuilding need not wait for the index rebuild to
    complete.
  - Resolves: rhbz#1737639
  - Prevented two VDO devices from being started on the same storage.
  - Resolves: rhbz#1725052
  - Fixed rare races which could result in VDO issuing I/O while suspended.
  - Resolves: rhbz#1766358
  - Fixed crashes when re-suspending a VDO after it had been resumed.
  - Resolves: rhbz#1765253
  - Made async mode ACID. Added async-unsafe mode to preserve the performance of
    the old implementation.
  - Resolves: rhbz#1657301


author: Cestmir Kalina <ckalina@redhat.com> - 1.1-1
changelog:
  - Replace the Python interpreter path to RHEL8 compliant path.
  - Related: #1633691
  - Resolves: #1637594


author: Cestmir Kalina <ckalina@redhat.com> - 1.3-1
changelog:
  - Resolves: #1642134 Error restrict bugs to groups without permission while
    trying to submit RHEL8 symbols
  - New ksc reports will no longer be submitted under redhat bugzilla group.
  - At least one bugzilla group must be specified by a ksc user, otherwise ksc
    will terminate with an error.
  - Version bump to 1.3


author: Cestmir Kalina <ckalina@redhat.com> - 1.4-1
changelog:
  - Resolves: #1643187 ksc manpage lies -k can only be specified once
  - Resolves: #1645335 FILE is shown in ksc man page but no explain or effect
  - Support for multiple -k arguments added
  - Man page reworded to match ksc behaviour


author: Čestmír Kalina <ckalina@redhat.com> - 1.5-1
changelog:
  - Resolves: #1647528 ksc add feature to copy justifications between ksc...
  - Resolves: #1648026 ksc add a non-processed .ko file
  - Resolves: #1647974 piped input causes ksc to fail when asking for user input
  - Add support for justification carry over.
  - Add support for symbol filtering using -K.
  - Fix input problems when piping through to ksc.
  - Extend manpage with EXAMPLES section.
  - Version bump fo 1.5.


author: Čestmír Kalina <ckalina@redhat.com> - 1.6-1
changelog:
  - Resolves: #1729039 Extend ksc output to include environment metadata
  - Add modinfo vermagic field to the output.
  - Add kmod (provides modinfo) to requires.


author: Čestmír Kalina <ckalina@redhat.com> - 1.6-2
changelog:
  - Resolves: #1729039 Extend ksc output to include environment metadata
  - (OSCI) Add kmod to Makefile-generated Requires


author: Jakub Hrozek <jhrozek@redhat.com> - 1.3.2-1
changelog:
  - New upstream release 1.3.3
  - Resolves: rhbz#1574267 - libldb-1.3.3 is available
  - Backport a patch from samba upstream to not require rpc.h


author: Petr Viktorin <pviktori@redhat.com> - 1.4.0-3
changelog:
  - Use %{__python2}, not "python", as the Python2 interpreter
  - Add workaround to allow building with Python 2
  - Remove the lmdb dependency in RHEL


author: Jakub Hrozek <jhrozek@redhat.com> - 1.5.4-1
changelog:
  - Resolves: rhbz#1684582 - Rebase libldb to version 1.5.4 for Samba
  - Resolves: rhbz#1567115 - libldb: Drop Python 2 subpackages from RHEL 8
  - Resolves: rhbz#1597243 - libldb uses Python 2 to build.


author: Jakub Hrozek <jhrozek@redhat.com> - 1.5.4-2
changelog:
  - Fix some python2-related upgrade issues
  - Related: rhbz#1567115 - libldb: Drop Python 2 subpackages from RHEL 8


author: Isaac Boukris <iboukris@redhat.com> - 2.0.7-3
changelog:
  - Resolves: rhbz#1754423 - Rebase libldb to 2.0.7 version for samba
  - Related: rhbz#1754423 - Fix sssd tests (ldb)


author: Jeff Moyer <jmoyer@redhat.com> - 0.3.110-12.el8
changelog:
  - Pass in the distro-provided CFLAGS and LFLAGS. (Jeff Moyer)
  - Get rid of -nostartfiles -nostdlib (Jeff Moyer)
  - Resolves: rhbz#1630578


author: Richard Hughes <richard@hughsie.com> 0.7.8-1
changelog:
  - New upstream release
  - Add as_version_string() for fwupd
  - Add support for component agreements
  - Correctly compare version numbers like '1.2.3' and '1.2.3a'
  - Don't include the path component in the name when parsing the package filename
  - If the launchable is specified don't guess it when composing
  - Never add more than one component to the AppStream store when composing


author: Richard Hughes <richard@hughsie.com> 0.7.9-1
changelog:
  - New upstream release
  - Convert local icons found in metainfo files
  - Follow the Debian tilde usage when ordering versions
  - Use the launchable to find the desktop filename


author: Richard Hughes <richard@hughsie.com> 0.7.10-1
changelog:
  - New upstream release
  - Do not parse firmware files anymore
  - Do not require a release transaction when validating in relaxed mode
  - Extract release descriptions and agreement sections for translation


author: Richard Hughes <richard@hughsie.com> 0.7.11-1
changelog:
  - New upstream release
  - Add AS_APP_QUIRK_DEVELOPER_VERIFIED
  - Escape quotes in attributes
  - Provide async variants of store load functions


author: Richard Hughes <richard@hughsie.com> 0.7.13-1
changelog:
  - New upstream release
  - Do not restrict the maximum number of releases allowed
  - Throw an error when a launchable desktop-id is invalid


author: Richard Hughes <richard@hughsie.com> 0.7.14-1
changelog:
  - New upstream release
  - Add new API for gnome-software
  - Set the AppStream ID from the X-Flatpak desktop key


author: Jeff Law <law@redhat.com> 8.2.1-3.4
changelog:
  - Backport PPC string inlines from trunk which allow for valgrind's
    memcheck to work properly (#1652929)
  - Backport bugfix for clz pattern on s390 affecting jemalloc (#1652016)


author: Marek Polacek <polacek@redhat.com> 8.3.1-3
changelog:
  - update from Fedora 8.3.1-3 (#1680182)
  - remove load and test FP splitter (#1673116)
  - fix *movsi_from_df (#1677652)
  - add missing headers
  - add support for live patching (#1668903)
  - retire gcc8-rh1612514.patch, gcc8-rh1652016.patch, gcc8-rh1652929-?.patch


author: Marek Polacek <polacek@redhat.com> 8.3.1-4
changelog:
  - update from Fedora 8.3.1-4 (#1680182)
  - drop gcc8-pr60790.patch, gcc8-pr89629.patch, gcc8-rh1668903-4.patch


author: Marek Polacek <polacek@redhat.com> 8.3.1-4.2
changelog:
  - backport the -fuse-ld=lld option (#1670535)
  - TLS model fix (#1678555, PR c++/85400)
  - two small autoFDO fixes (#1686082)
  - libgomp update (#1707568)
  - member template redeclaration fix (#1652704, PR c++/86747)
  - turn libgcc_s.so into a linker script on i?86, x86_64, ppc64le and also on
    ppc and ppc64 for 64-bit multilib (#1708309)
  - avoid using unaligned vsx or lxvd2x/stxvd2x for memcpy/memmove inline
    expansion (#1666977)


author: Marek Polacek <polacek@redhat.com> 8.3.1-4.5
changelog:
  - fix shift count operand printing (#1730380)
  - fix tree-outof-ssa.c ICE with vector types (PR middle-end/90139, #1730454)
  - fix out-of-ssa with unsupported vector types (PR rtl-optimization/90756,
    - fix ICE with template placeholder for TTP (PR c++/86098, #1730454)


author: Marek Polacek <polacek@redhat.com> 8.3.1-5
changelog:
  - update from Fedora gcc-8.3.1-5 (#1747157)
  - use unspec_volatile for darn (PR target/91481, #1760205, CVE-2019-15847)


author: Karel Zak <kzak@redhat.com> 2.32.1-13
changelog:
  - fix #1734553 - blkid_get_dev() leak file descriptor to underlying block device
  - fix #1719069 - findmnt warning "recommended root FS passno is 1" for XFS


author: Karel Zak <kzak@redhat.com> 2.32.1-18
changelog:
  - fix #1739443 - lscpu reports wrong hypervisor in nested virt on s390x
  - fix #1743555 - command chfn adds some useless commas with GECOS information into /etc/password


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.7.8-6
changelog:
  - Python 2 binary package renamed to python2-libcap-ng
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Nikola Forró <nforro@redhat.com> - 0.41-17
changelog:
  - backport several upstream fixes
  - set Delegate property for cgconfig service to make sure complete
    cgroup hierarchy is always created by systemd


author: Kalev Lember <klember@redhat.com> - 0.6.9-1
changelog:
  - Update to 0.6.9
  - Use make_install macro
  - Mark COPYING and COPYING.LIB as %license
  - Tighten -devel subpackage deps


author: michel normand <normand@linux.vnet.ibm.com> 1.3-4
changelog:
  - do cp -p of man page in build section, and add empty lines below.
  - this is the initial version before git commit.


author: michel normand <normand@linux.vnet.ibm.com> 1.4-4
changelog:
  - Update v1.4
    * New API function cxl_get_psl_timebase_synced.
    * Simplify implementation of OUT_OF_RANGE macro
    * libcxl add install target
    * use LDFLAGS from the env
    * libcxl set default soname and interface version
    * Add extern "C" to libcxl.h for compatibility with C++ projects
    * typo error in 3 man pages
    * Add SONAME support in Makefile
  - remove embeded patches:
    libcxl_typo_correction_man_pages.patch
    libcxl_add_soname_in_Makefile.patch
  - new libcxl_create_soname_link.patch


author: Michel Normand <normand@linux.vnet.ibm.com> 1.5-0
changelog:
  - Update v1.5
    * libcxl: Check afu link when read from PSA mmio return all FFs
    * Makefile: add -Werror
    * Use _DEFAULT_SOURCE rather than _BSD_SOURCE
    * Fix sparse warnings
    * Added #include <asm/types.h>
    * Man pages: document flags CXL_MMIO_{BIG,HOST,LITTLE}_ENDIAN
    * Makefile: do not fail if target symlink already exists.
    * Man pages: clarify mmio read/write alignment constraints.
    * Create LIBSONAME link
    * sysfs: Fix a boundary condition check for OUT_OF_RANGE macro
  - remove libcxl_create_soname_link.patch part of above update.
  - add libcxl_sysmacros.patch to avoid warning at build time


author: Sinny Kumari <skumari@redhat.com> - 1.7-1
changelog:
  - Resolves RH#1524655
  - Rebase to v1.7
  - Remove libcxl_sysmacros.patch, available in this rebase version


author: Ales Matej <amatej@redhat.com> - 0.35.5-1
changelog:
  - Update to 0.35.5
  - Make libdnf own its plugin directory (RhBug:1714265)
  - Set priority of dnf.conf.d drop-ins
  - Fix toString() to not insert [] (RhBug:1584442)
  - Fix handling large number of filenames on input (RhBug:1690915)
  - Detect armv7 with crypto extension only on arm version >= 8
  - A new standardized User-Agent field consisting of the libdnf and OS version
    (including the variant) (RhBug:1156007)
  - Add basic countme support (RhBug:1647454)
  - Fix crash in PackageKit (RhBug:1636803)
  - Do not create @System.solv files (RhBug:1707995)
  - Set LRO_CACHEDIR so zchunk works again (RhBug:1739867)
  - Improve detection of extras packages by comparing (name, arch) pair instead
    of full NEVRA (RhBuh:1684517)
  - Improve handling multilib packages in the history command (RhBug:1728637)
  - Repo download: use full error description into the exception text (RhBug:1741442)
  - Properly close hawkey.log (RhBug:1594016)
  - Fix dnf updateinfo --update to not list advisories for packages updatable
    only from non-enabled modules
  - Apply modular filtering by package name (RhBug:1702729)


author: Ales Matej <amatej@redhat.com> - 0.38.1-1
changelog:
  - Update to 0.38.1
  - Change the best option default to false
  - Use more descriptive message when failed to retrieve GPG key (RhBug:1605117)
  - Add removeMetadataTypeFromDownload function to the API
  - Context part of libdnf can now read vars (urlvars) from dirs and environment
  - Throw exception immediately if file cannot be opened
  - Add test when there is no primary metadata in compatible format (RhBug:1744960)
  - Various improvements to countme features
  - Don't abort on rpmdb checksum calculation failure
  - Enable module dependency trees when using set_modules_enabled_by_pkgset() (RhBug:1762314)
  - Resolve problem with --best and search in provides (RhBug:1737469)
  - New method "Query::filterSubject()", replaces Solution::getBestSolution()
  - The Solution class was removed
  - Add query argument into get_best_query and get_best_solution
  - Add module reset function into dnf_context
  - Add method to get all repository metadata locations
  - Catch NoModuleException in case of not existent value was used in persistor (RhBug:1761773)


author: Ales Matej <amatej@redhat.com> - 0.39.1-1
changelog:
  - Update to 0.39.1
  - Report reason how package was excluded (RhBug:1649754)
  - Additional Arm detection improvements (RhBug:1691430)
  - Set skip_if_unavailable for media repos to skip their update (RhBug:1716067)
  - Add support of xml:base for remote and local url in context (RhBug:1734350,1717865)


author: Ales Matej <amatej@redhat.com> - 0.39.1-3
changelog:
  - Add two new query filters: obsoletes_by_priority, upgrades_by_priority (RhBug:1769466)
  - [context] Add wildcard support in dnf_context_repo_set_data (RhBug:1781420)
  - Remove killGpgAgent function (RhBug:1781601)


author: Jerry James <loganjerry@gmail.com> - 3.1-23.20170329cvs
changelog:
  - Add gcc BR
  - Build verbosely
  - Drop obsolete --enable-widec configure option
  - Fix "unused direct shared library dependency" warning from rpmlint again
  - Fix man page error due to BSD nroff macro that is not available on Linux
  - Drop explicit R on pkgconfig from the -devel package, autogenerated


author: Vishal Vijayraghavan <vishalvijayraghavan AT gmail DOT com> - 1:2.00.3-1
changelog:
  - Resolves: rhbz#1614529
  - Updated the BuildRequires to python3 and using latest build
  - Changed the upstream URL


author: Vishal vijayraghavan <vishalvijayraghavan AT gmail DOT com> - 1:2.00.3-4
changelog:
  - Resolves: rhbz#1643920: Removed Obsoletes: liberation-narrow-fonts and Provides: liberation-narrow-fonts macro


author: Vishal Vijayraghavan <vvijayra@redhat.com> - 1:2.00.3-6
changelog:
  - Resolves: #1664501 - liberation-fonts-common contains fonts.dir
  - Splitted the font family(mono, sans and serif) into diferrent root font directories


author: Jens Petersen <petersen@redhat.com> - 3.1-12
changelog:
  - protect install-info in the rpm scriptlets
    https://fedoraproject.org/wiki/Packaging:Scriptlets#Texinfo


author: Richard Hughes <richard@hughsie.com> - 1.0-1
changelog:
  - New upstream release
  - This fixes the security bug known as CVE-2018-5345
  - Add new API for fwupd
  - Do not encode timezone in generated files
  - Fix countless memory leaks when parsing corrupt files
  - Fix the calculation of the checksum on big endian machines
  - Switch to the Meson buildsystem


author: Tomáš Mráz <tmraz@redhat.com> 1.8.3-2
changelog:
  - make only_urandom a default in non-presence of configuration file
  - run the full FIPS selftests only when the library is called from
    application


author: Tomáš Mráz <tmraz@redhat.com> 1.8.3-3
changelog:
  - add CMAC selftest for FIPS POST
  - add continuous FIPS entropy test
  - disable non-approved FIPS hashes in the enforced FIPS mode


author: Richard Hughes <richard@hughsie.com> 0.2.10-1
changelog:
  - New upstream version
  - Correctly detect removed devices when rescanning
  - Fix a memory leak when using control tranfers
  - Fix symbol version table up to version 0.2.9


author: Rafael Aquini <aquini@redhat.com> - 2.20-10
changelog:
  - Fix up annocheck distro flag failures (1624131)
  - Convert libhugetlbfs run_tests.py to Python3 (1620250)


author: Rafael Aquini <aquini@redhat.com> - 2.21-4
changelog:
  - Fix: task-size-overrun hung over 8 hours on ppc64le (1737370)
  - Introduce libhugetlbfs-tests subpkg for CI tests (1688930)


author: Rafael Aquini <aquini@redhat.com> - 2.21-12
changelog:
  - Fix: Introduce libhugetlbfs-tests subpkg for CI tests (1688930)
  - trim repetitive changelogs for interim debug builds


author: Michal Židek <mzidek@redhat.com> - 2.2.3-14
changelog:
  - Resolves: rhbz#1767514 - sssd requires timed sudoers ldap entries to be
                             specified up to the seconds


author: Alexey Tikhonov <atikhono@redhat.com> - 2.2.3-16
changelog:
  - Resolves: rhbz#1792331 - sssd_be crashes when krb5_realm and krb5_server is
                             omitted and auth_provider is krb5


author: Alexey Tikhonov <atikhono@redhat.com> - 2.2.3-17
changelog:
  - Resolves: rhbz#1718193 - p11_child should have an option to skip
                             C_WaitForSlotEvent if the PKCS#11 module
                             does not implement it properly


author: Michal Židek <mzidek@redhat.com> - 2.2.3-18
changelog:
  - Resolves: rhbz#1580506 - [RFE]: sssd to be able to read smartcard
                             certificate EKU and perform an action based
                             on value when generating SSH key from a certificate


author: Alexey Tikhonov <atikhono@redhat.com> - 2.2.3-19
changelog:
  - Resolves: rhbz#1810634 - id command taking 1+ minute for returning user
                             information


author: Alexey Tikhonov <atikhono@redhat.com> - 2.2.3-19
changelog:
  - Resolves: rhbz#1580506 - [RFE]: sssd to be able to read smartcard
                             certificate EKU and perform an action based
                             on value when generating SSH key from a certificate
                             (additional patch)


author: Ondrej Mosnáček <omosnace@redhat.com> - 1.1.1-14_2
changelog:
  - [RHEL] Re-enable AEAD tests and ignore test result
  - [RHEL] Drop the ppc64 ignore-failures workaround


author: Ondrej Mosnáček <omosnace@redhat.com> - 1.1.1-16_1
changelog:
  - [RHEL] Apply 'Add missing dependencies to the tests package'
  - [RHEL] Apply 'Update patch from upstream'


author: Phil Sutter <psutter@redhat.com> - 0.3-2
changelog:
  - Add missing build requirement: gcc.
  - Add source code patches to facilitate following changes.
  - Patches managed in git, so add git as another build requirement.
  - Respect build system compiler flags.
  - Use %make_build instead of plain make in %build.
  - Add %check target which performs unattended runtime test.
  - Use -D install flag instead of manual mkdir.


author: Phil Sutter <psutter@redhat.com> - 0.3-3
changelog:
  - Use %autosetup flag '-p1' instead of '-S git' to get rid of git dependency.
  - Use %license macro in %files section.
  - Added comment about included patches' upstream status.


author: Martin Gansser <martinkg@fedoraproject.org> - 1:0.9.57-1
changelog:
  - Update to 0.9.57
  - Dropped dependency on libgcrypt
  - Dropped dependency on openssl
  - Update tarball link to "https:"
  - Add examples from doc/examples


author: Stephen Gallagher <sgallagh@redhat.com> - 2.0.0-1
changelog:
  - Update to 2.0.0 final
  - Assorted fixes for validation
  - Add modulemd-validator tool based on v2 code
  - Fix a crash when merging defaults
  - Add missing BuildRequires


author: Stephen Gallagher <sgallagh@redhat.com> - 2.5.0-2
changelog:
  - Fix memory corruption error using Module.search_rpms() from python
  - Speed up valgrind tests
  - Resolves: rhbz#1714766


author: Jiri Pirko <jiri@mellanox.com> - 1.6-1
changelog:
  - Update to 1.6
  - libndb: reject redirect and router advertisements from non-link-local
  - libndp: validate the IPv6 hop limit
  - libndp: revert API change for ndp_msg_send() and add ndp_msg_send_with_flags()
  - libndp: fix type of field "na" in "struct ndp_msgna"
  - ndptool: add option to send messages types
  - libndp: add option flags to send messages
  - Add SubmittingPatches howto


author: Hangbin Liu <haliu@redhat.com> - 1.7-1
changelog:
  - Update to 1.7
  - libndp: apply filter to raw socket to only accept ND messages
  - libndp: move ndp_sock_{open,close}() after msg parsing functions
  - ndptool: Fix compilation on musl libc


author: Hangbin Liu <haliu@redhat.com> - 1.7-2
changelog:
  - ndptool: add -T target support (rhbz 1666194)
  - ndptool: fix target parameter typo (rhbz 1666194)
  - libndp: close sockfd after using to avoid handle leak (rhbz 1666194)
  - libndp: fix nd_msg typo when setting target address (rhbz 1666194)


author: Hangbin Liu <haliu@redhat.com> - 1.7-3
changelog:
  - ndptool: add -D dest support (rhbz 1697595)
  - ndptool: fix potential memory leak caused by strdup (rhbz 1697595)


author: Steve Dickson <steved@redhat.com> 2.3.3-24
changelog:
  - nfs.man: Fixed small typo in man page (bz 1732877)
  - mount: Report correct error in the fall_back cases (bz 1709963)
  - rpc.mountd: Fix e_hostname and e_uuid leaks (bz 1712202)
  - spec: Remove redundant manpage files (bz 1718738)


author: Steve Dickson <steved@redhat.com> 2.3.3-27
changelog:
  - More coverity scans updates (bz 1746572)
  - nfsd: Adjust nfs.conf setting/parsing of rdma port (bz 1710532)
  - Add plain --rdma option to nfs.conf convertor (bz 1747295)
  - mountstats: Add per-op error counts to iostat command (bz 1719983)
  - gssd: add configure options verbosity to man page (bz 1749642)


author: Phil Sutter <psutter@redhat.com> [1.1.1-2.el8]
changelog:
  - chain: Hash chain list by name (Phil Sutter) [1658533]
  - chain: Add lookup functions for chain list and rules in chain (Phil Sutter) [1658533]
  - chain: Support per chain rules list (Phil Sutter) [1658533]
  - src: remove nftnl_rule_cmp() and nftnl_expr_cmp() (Phil Sutter) [1658533]


author: Phil Sutter <psutter@redhat.com> [1.1.1-3.el8]
changelog:
  - src: chain: Fix nftnl_chain_rule_insert_at() (Phil Sutter) [1666495]
  - src: chain: Add missing nftnl_chain_rule_del() (Phil Sutter) [1666495]
  - flowtable: Fix for reading garbage (Phil Sutter) [1661327]
  - flowtable: Fix memleak in nftnl_flowtable_parse_devs() (Phil Sutter) [1661327]
  - flowtable: Fix use after free in two spots (Phil Sutter) [1661327]
  - flowtable: Add missing break (Phil Sutter) [1661327]
  - object: Avoid obj_ops array overrun (Phil Sutter) [1661327]


author: Phil Sutter <psutter@redhat.com> [1.1.4-2.el8]
changelog:
  - obj/ct_timeout: Fix NFTA_CT_TIMEOUT_DATA parser (Phil Sutter) [1758673]
  - set_elem: Validate nftnl_set_elem_set() parameters (Phil Sutter) [1758673]
  - obj/ct_timeout: Avoid array overrun in timeout_parse_attr_data() (Phil Sutter) [1758673]
  - set: Don't bypass checks in nftnl_set_set_u{32,64}() (Phil Sutter) [1758673]
  - obj/tunnel: Fix for undefined behaviour (Phil Sutter) [1758673]
  - set_elem: Fix return code of nftnl_set_elem_set() (Phil Sutter) [1758673]
  - obj: ct_timeout: Check return code of mnl_attr_parse_nested() (Phil Sutter) [1758673]


author: Phil Sutter <psutter@redhat.com> [1.1.5-2.el8]
changelog:
  - chain: Correctly check realloc() call (Phil Sutter) [1778952]
  - flowtable: Correctly check realloc() call (Phil Sutter) [1778952]
  - chain: Fix memleak in error path of nftnl_chain_parse_devs() (Phil Sutter) [1778952]
  - flowtable: Fix memleak in error path of nftnl_flowtable_parse_devs() (Phil Sutter) [1778952]


author: Phil Sutter <psutter@redhat.com> [1.1.5-3.el8]
changelog:
  - set_elem: Introduce support for NFTNL_SET_ELEM_KEY_END (Phil Sutter) [1795223]
  - set: Add support for NFTA_SET_DESC_CONCAT attributes (Phil Sutter) [1795223]
  - include: resync nf_tables.h cache copy (Phil Sutter) [1795223]


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 3.3.0-4
changelog:
  - Python 2 binary package renamed to python2-libnl3
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Bastien Nocera <bnocera@redhat.com> - 1.22.0-6
changelog:
  + libpeas-1.22.0-6
  - Remove python2 loader, all GNOME apps using libpeas were ported to Python3
    when ported to GTK+ 3.x, and obsolete libpeas-loader-python
  - Resolves: #1559090


author: Dan Winship <danw@redhat.com> - 0.4.15-5.1
changelog:
  - Drop python2 subpackage (#1559092)
  - Drop PAC runner based on the "pacrunner" package (#1569023)
  - Replace pacrunner-crash-fix patch with version from RHEL7
  - Drop kde subpackage (#1538147)


author: Tomáš Mráz <tmraz@redhat.com> 1.4.0-1
changelog:
  - Do not try to check presence of too short username in password
  - Make the user name check optional (via usercheck option)
  - Add an 'enforcing' option to make the checks to be warning-only
    in PAM
  - The difok = 0 setting will disable all old password similarity
    checks except new and old passwords being identical
  - Updated translations from Zanata


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 1.4.0-4
changelog:
  - Python 2 binary package renamed to python2-pwquality
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Jan Pokorný <jpokorny+rpm-libqb@redhat.com> - 1.0.3-1
changelog:
  - Update to libqb-1.0.3, for list of changes see:
    https://github.com/ClusterLabs/libqb/releases/tag/v1.0.3


author: Pavla Kratochvilova <pkratoch@redhat.com> - 1.10.1-1
changelog:
  - Update to 1.10.1
  - Reduce download delays
  - Add an option to preserve timestamps of the downloaded files (RhBug:1688537)
  - Append the '?' part of repo URL after the path
  - Fix memory leaks


author: Ales Matej <amatej@redhat.com> - 1.10.6-1
changelog:
  - Update to 1.10.6
  - Imporove handling of xattr to re-download damadged files (RhBug:1690894)
  - Rephrase repository GPG check error message (RhBug:1741442)
  - Add sleep before next try when all mirrors were tried (RhBug:1741931)
  - Raise logging level of error messages (RhBug:1737709)
  - Handle webservers that don't support ranges when downloading zck
  - Define LRO_SUPPORTS_CACHEDIR only with zchunk (RhBug:1726141)
  - Allow to use mirrors multiple times for a target (RhBug:1678588)
  - Allow to try baseurl multiple times (RhBug:1678588)


author: Ales Matej <amatej@redhat.com> - 1.11.0-1
changelog:
  - Update to 1.11.0
   - Retry mirrorlist/metalink downloads several times (RhBug:1741931)
   - Improve variable substitutions in URLs and add ${variable} support


author: Matej Habrnal <mhabrnal@redhat.com> 2.9.5-6
changelog:
  - replace all Fedora URLs by corresponding values for RHEL
  - fix coverity issues
  - Resolves: #1602590, #1623406


author: Michal Fabik <mfabik@redhat.com> 2.9.5-7
changelog:
  - bugzilla: change the default bugzilla group
  - tests: Disable strcpm'ing a freed pointer
  - Add autogen.sh
  - Resolves #1660449


author: Martin Kutlak <mkutlak@redhat.com> - 2.9.5-10
changelog:
  - reportclient: Search for required packages recursively
  - reportclient: Find and download required debuginfo packages
  - report-client: Find debuginfos in own method
  - Resolves: rhbz#1783897


author: Petr Lautrbach <plautrba@redhat.com> - 2.9-2.1
changelog:
  - Use Python distutils to install SELinux python bindings (#1719771)
  - Move  sefcontext_compile to -utils package (#1612518)


author: Petr Lautrbach <plautrba@redhat.com> - 2.7-2
changelog:
  - reset pointer after free in cil_strpool_destroy()
  - cil: Add ability to redeclare types[attributes]
  - cil: Keep attributes used by generated attributes in neverallow rules
  - use IN6ADDR_ANY_INIT to initialize IPv6 addresses
  - fix memory leak in sepol_bool_query()
  - cil: drop wrong unused attribute
  - cil: fix -Wwrite-strings warning
  - cil: __cil_post_db_neverallow_attr_helper() does not use extra_args


author: Petr Lautrbach <plautrba@redhat.com> - 2.7-5
changelog:
  - cil: Create new keep field for type attribute sets
  - build: follow standard semantics for DESTDIR and PREFIX
  - cil: show an error when cil_expr_to_string() fails


author: Petr Lautrbach <plautrba@redhat.com> - 2.7-6
changelog:
  - Prevent freeing unitialized value in ibendport handling
  - Add support for the SCTP portcon keyword
  - Export sepol_polcap_getnum/name functions


author: Pavla Kratochvilova <pkratoch@redhat.org> - 0.7.4-1
changelog:
  - soname bump to "1"
  - incompatible API changes:
    * bindings: Selection.flags is now an attribute
    * repodata_lookup_num now works like the other lookup_num functions
  - new functions:
    * selection_make_matchsolvable
    * selection_make_matchsolvablelist
    * pool_whatmatchessolvable
    * repodata_search_arrayelement
    * repodata_lookup_kv_uninternalized
    * repodata_search_uninternalized
    * repodata_translate_dir
  - new repowriter interface to write solv files allowing better
    control over what gets written
  - support for filtered file lists with a custom filter
  - dropped support of (since a long time unused) REPOKEY_TYPE_U32
  - selected bug fixes:
    * fix nasty off-by-one error in repo_write
    * do not autouninstall packages because of forcebest updates
    * fixed a couple of null pointer derefs and potential memory
      leaks
    * made disfavoring recommended packages work if strong recommends
      is enabled
    * no longer disable infarch rules when they don't conflict with
      the job
    * repo_add_rpmdb: do not copy bad solvables from the old solv file
    * fix cleandeps updates not updating all packages
  - new features:
    * support rpm's new '^' version separator
    * support set/get_considered_list in bindings
    * new experimental SOLVER_FLAG_ONLY_NAMESPACE_RECOMMENDED flag
    * do favor evaluation before pruning allowing to (dis)favor
      specific package versions
    * bindings: support pool.matchsolvable(), pool.whatmatchessolvable()
      pool.best_solvables() and selection.matchsolvable()
    * experimental DISTTYPE_CONDA and REL_CONDA support


author: Ales Matej <amatej@redhat.org> - 0.7.7-1
changelog:
  - Update to 0.7.7
  - selected bug fixes:
    * fix updating of too many packages in focusbest mode
    * fix handling of disabled installed packages in distupgrade
    * fix repository priority handling for multiversion packages
    * better support of inverval deps in pool_match_dep()
    * support src rpms that have non-empty provides
    * fix favorq leaking between solver runs if the solver is reused
    * fix SOLVER_FLAG_FOCUS_BEST updateing packages without reason
    * be more correct with multiversion packages that obsolete their
      own name
    * allow building with swig-4.0.0
    * lock jobs now take precedence over dup and forcebest jobs
  - new features
    * new POOL_FLAG_WHATPROVIDESWITHDISABLED pool flag 
    * bindings: add get_disabled_list() and set_disabled_list()
    * bindings: add whatcontainsdep()
    * bindings: make the selection filters return the self object
    * MSVC compilation support


author: Milan Crha <mcrha@redhat.com> - 2.62.2-1
changelog:
  - Update to 2.62.2
  - Backport upstream patch for CVE-2018-12910 - Crash in soup_cookie_jar.c:get_cookies() on empty hostnames


author: Anderson Sasaki <ansasaki@redhat.com> - 0.8.5-1
changelog:
  - Update to version 0.8.5
    * Fixed an issue where global known_hosts file was ignored (#1649321)
    * Fixed ssh_get_fd() to return writable file descriptor (#1649319)
    * Fixed regression introduced in known_hosts parsing (#1649315)
    * Fixed a regression which caused only the first algorithm in known_hosts to
      be considered (#1638790)


author: Anderson Sasaki <ansasaki@redhat.com> - 0.8.91-0.1
changelog:
  - Update to 0.9.0 pre release version (0.8.91)
  - Added default configuration files for client and server
  - Removed unused patch files left behind
  - Fixed issues found to run upstream test suite with SELinux


author: Anderson Sasaki <ansasaki@redhat.com> - 0.9.0-1
changelog:
  - Update to version 0.9.0
    https://www.libssh.org/2019/06/28/libssh-0-9-0/
  - Added explicit Requires for crypto-policies
  - Do not ignore known_hosts keys when SSH_OPTIONS_HOSTKEYS is set
  - Provide the configuration files in a separate libssh-config subpackage


author: Anderson Sasaki <ansasaki@redhat.com> - 0.9.0-3
changelog:
  - Add Obsoletes in libssh-config to avoid conflict with old libssh which
    installed the configuration files.


author: Jakub Hrozek <jhrozek@redhat.com> - 2.1.14-1
changelog:
  - New upstream release - 2.1.14
  - Patch the waf script to explicitly call python2 as "env python" doesn't
    yield py2 anymore


author: Jakub Hrozek <jhrozek@redhat.com> - 2.1.16-1
changelog:
  - Resolves: rhbz#1684577 - Rebase libtalloc to version 2.1.16 for Samba
  - Resolves: rhbz#1597315 - libtalloc uses Python 2 to build
  - Resolves: rhbz#1567136 - libtalloc: Drop Python 2 subpackage from RHEL 8


author: Jakub Hrozek <jhrozek@redhat.com> - 2.1.16-2
changelog:
  - Remove python2 libraries on upgrade
  - Resolves: rhbz#1567136 - libtalloc: Drop Python 2 subpackage from RHEL 8


author: Jakub Hrozek <jhrozek@redhat.com> - 2.1.16-3
changelog:
  - Also obsolete python2-libtalloc-debuginfo
  - Resolves: rhbz#1567136 - libtalloc: Drop Python 2 subpackage from RHEL 8


author: Peter Robinson <pbrobinson@fedoraproject.org> 4.9-2
changelog:
  - Move development related docs to devel sub package
  - Cleanup spec and macros
  - Update valgrind ExclusiveArch


author: Jakub Hrozek <jhrozek@redhat.com> - 1.3.16-1
changelog:
  - New upstream release 1.3.16
  - Use RHEL_ALLOW_PYTHON2_FOR_BUILD=1 until libtalloc uses waf3
  - Patch the waf script to explicitly call python2 as "env python" doesn't
    yield py2 anymore


author: Jakub Hrozek <jhrozek@redhat.com> - 1.3.18.1
changelog:
  - Resolves: rhbz#1684579 - Rebase libtdb to version 1.3.18 for Samba
  - Resolves: rhbz#1597319 - libtdb uses Python 2 to build
  - Resolves: rhbz#1567138 - libtdb: Drop Python 2 subpackage from RHEL 8


author: Jakub Hrozek <jhrozek@redhat.com> - 1.3.18.2
changelog:
  - Obsolete the python2 packages on upgrade
  - Resolves: rhbz#1567138 - libtdb: Drop Python 2 subpackage from RHEL 8


author: Isaac Boukris <iboukris@redhat.com> - 1.4.2-2
changelog:
  - Resolves: rhbz#1754420 - Rebase libtdb 1.4.2 for samba
  - Related: rhbz#1754420 - Fix sssd tests (tdb)


author: Xin Long <lxin@redhat.com> - 1.27-8
changelog:
  - Add fix to only process LACPDU after port ifinfo is set
  - Add port_hwaddr_changed for ab, lb and lacp runners
  - Add patch to fix runner.sys_prio default in man docs
  - Add patch to empty LDFLAGS before checking for libnl3 in configure.ac
  - Add patch to not crash when trying to print unregistered device name
  - Add patch to use SWIG_FromCharPtrAndSize for Python3 support
  - Add patch to check to_stdout return correctly in bond2team in bond2team
  - Add 'BuildRequires: systemd-units' in libteam.spec to fix building errors
  - Add 'autoreconf --force --install -I m4' in libteam.sepc to regenerate configure
  - Remove ifup/ifdown scripts installation in libteam.sepc


author: Xin Long <lxin@redhat.com> - 1.28-1
changelog:
  - teamd: lacp: update port state according to partner's sync bit
  - man: fix runner.min_ports default value [1679853]
  - teamd: lw: nsna_ping: only send ns on enabled port [1671195]
  - teamd: lw: arp_ping: only check arp reply message [1663093]
  - teamd: config: update local prio to kernel [1657113]
  - teamnl: update help message
  - 1.28 release
  - teamd: lacp: send LACPDU when port state transitions from DEFAULT to CURRENT
  - man teamd.conf: Document ARP Ping link_watch.vlanid option
  - man teamd.conf: fix indentation of link_watch.send_always
  - libteam/options: fix s32/u32 data storage on big endian
  - teamd: add an option to force log output to stdout, stderr or syslog
  - teamd: add port_master_ifindex_changed for teamd_event_watch_ops
  - man: add 'random' to the list of available runners
  - examples: fix duplex comparison against best port


author: Xin Long <lxin@redhat.com> - 1.28-2
changelog:
  - teamd: use enabled option_changed to sync enabled to link_up for lb runner [1668132]
  - teamd: tdport has to exist if item->per_port is set in __find_by_item_path [1687336]
  - teamd: remove port if adding fails [1668744]


author: Xin Long <lxin@redhat.com> - 1.28-3
changelog:
  - teamd: return 0 if tdport doesn't exist in teamd_config_port_set [1722449]
  - teamd: improve the error output for non-integer port prio


author: Xin Long <lxin@redhat.com> - 1.29-1
changelog:
  - man teamd.conf: update some parameter default values [1732587]
  - 1.29 release
  - teamd: add port_master_ifindex_changed for link_watch_port_watch_ops
  - initscripts: fix if/fi align
  - teamd: fix a json object memleak in get_port_obj() [1767685]
  - libteam: set netlink event socket as non-blocking [1684389]
  - libteam: double NETLINK_RCVBUF to fix -ENOMEM error
  - teamd: add a default value 1000 for link_watch.interval


author: Jakub Hrozek <jhrozek@redhat.com> - 0.9.37-1
changelog:
  - New upstream release 0.9.37
  - Use RHEL_ALLOW_PYTHON2_FOR_BUILD=1 for build
  - Use %{__python2}, not "python", as the Python2 interpreter


author: Jakub Hrozek <jhrozek@redhat.com> - 0.9.39-1
changelog:
  - Resolves: #1684580 - Rebase libtevent to version 0.9.36 for Samba
  - Resolves: #1597318 - libtevent uses Python 2 to build
  - Resolves: #1567139 - libtevent: Drop Python 2 subpackage from RHEL 8


author: Jakub Hrozek <jhrozek@redhat.com>
changelog:
  - Remove the python2 subpackages on upgrade
  - Resolves: #1567139 - libtevent: Drop Python 2 subpackage from RHEL 8


author: Isaac Boukris <iboukris@redhat.com> - 0.10.0-2
changelog:
  - Resolves: #1754421 - Upgrade tevent to 0.10.0 version for samba
  - Related: #1754421 - Fix sssd tests (tevent)


author: Steve Dickson <steved@redhat.com> 1.1.4-4
changelog:
  - Enable gating using reverse dependency testing of nfs-utils (bz 1681965)
  - Updated the URL (bz 1638671)
  - Fix EOF detection on non-blocking socket (bz 1641875)


author: Pavel Raiskup <praiskup@redhat.com> - 2.4.6-23
changelog:
  - bake in versioned requirement on automake (rhbz#1193591)
  - fix testsuite FTBFS against automake 1.16.1
  - bypass -specs=* to gcc (rhbz#985592)


author: Hans de Goede <hdegoede@redhat.com> - 1.0.21-0.1.git448584a
changelog:
  - Update to a pre 1.0.21 git snapshot to bring in libusb_interrupt_event_handler
    which chromium needs (rhbz#1270324)


author: Jakub Hrozek <jhrozek@redhat.com> - 0.62-14
changelog:
  - Do not build python2-libuser at all in RHEL-8
  - Resolves: #1559103 - libuser: Drop Python 2 subpackage(s) from RHEL 8


author: Jakub Hrozek <jhrozek@redhat.com> - 0.62-16
changelog:
  - Use 2048bit keys in tests
  - Resolves: rhbz#1611729 - [RHEL8-S-BUILD] libuser Fails Scratch Build on rhel-8.0


author: Jakub Hrozek <jhrozek@redhat.com> - 0.62-17
changelog:
  - Resolves: rhbz#1558151 - libuser needs audit events around the account
                             lifecycle


author: Jakub Hrozek <jhrozek@redhat.com> - 0.62-19
changelog:
  - Resolves: rhbz#1602600 -  Please review important issues found by covscan
                              in "libuser-0.62-14.el8+7" package


author: Jakub Hrozek <jhrozek@redhat.com> - 0.62-20
changelog:
  - Resolves: rhbz#1637398 - libuser-python3 should be renamed to comply
                             with Packaging Guidelines


author: Jakub Hrozek <jhrozek@redhat.com> - 0.62-23
changelog:
  - Actually apply the patch from the previous build
  - Resolves: rhbz#1670997 - Amend the user lifecycle auditing


author: Miroslav Lichvar <mlichvar@redhat.com> - 1.1.6-14
changelog:
  - build with hardening LDFLAGS (#1548717)
  - remove obsolete macro and comments
  - add gcc to build requirements


author: Harald Hoyer <harald@redhat.com> - 16-1
changelog:
  - libvarlink 16
  - fixed coverity issues
  - Resolves: #1638294 - Interface name validation rule update


author: Björn Esser <besser82@fedoraproject.org> - 4.0.1-5
changelog:
  - Add patch to update to recent development branch
  - Re-enable SUNMD5 support as it is BSD licensed now
  - Build compatibility symbols for glibc only
  - Skip failing testsuite once


author: Xin Long <lxin@redhat.com> - 1.0.18-3
changelog:
  - Added a patch to fix netinet/sctp.h not to be installed.
  - Added some fixes for kernel feature detection.


author: Ondřej Lysoněk <olysonek@redhat.com> - 3.4.0-21.20180522git70f7e08
changelog:
  - Fix printing CPU info on non-x86 architectures in sensors-detect
  - Resolves: rhbz#1752854
  - Fix printing lm_sensors version in sensors-detect and pwmconfig
  - Resolves: rhbz#1677414


author: Fedora Release Engineering <releng@fedoraproject.org> - 1.0.4-0.27.20111007git
changelog:
  - Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
  - Explicitly include <sys/sysmacros.h> due to glibc-headers changes.
  Definition of major and minor macros is no longer transitively included
  through <sys/types.h>, hence make it explicit.
  Ref:
  https://sourceware.org/git/?p=glibc.git;a=blob_plain;f=NEWS;hb=HEAD


author: Kamil Dudka <kdudka@redhat.com> - 3.14.0-3
changelog:
  - fix programming mistakes detected by Coverity Analysis
  - document the --version option in the logrotate(8) man page (#1611498)


author: Lianbo Jiang <lijiang@redhat.com> - B.02.18-18
changelog:
  - Fix:59a8e99ab22d ("Porting the code from /CoreOS/lshw/sanity/check-output for the CI gating")
  - Resolves: rhbz#1680623


author: Lianbo Jiang <lijiang@redhat.com> - B.02.18-22
changelog:
  - Display proper logical name of network device
  - Resolves: rhbz#1724087
  - Add DIMM running speed and Print dimm rank information
  - Resolves: rhbz#1725199


author: Robert Scheck <robert@fedoraproject.org> - 1.03-13
changelog:
  - Added patch by Khem Raj to use static inlines as the external
    inline definition has changed with GCC 5 (to fix ppc64 builds)


author: Patsy Griffin Franklin <pfrankli@redhat.com> 1:4.2.1-7
changelog:
  - Fix build failure caused by automake versioning differences related
    to the glob changes. (#1589769)
  - Fix testing failure due to Perl changes related to expanding paths.


author: Vit Mojzis <vmojzis@redhat.com> - 2.9-2
changelog:
  - Revert "mcstransd select correct colour range." (#1731451)
  - Fix mcstrans secolor examples (#1731451)


author: Xiao Ni <xni@redhat.com> - 4.1.12
changelog:
  - Update mdadm to latest upstream && change tmpfiles directory && correct changelog date
  - Resolves rhbz#1800521 and rhbz#1657265


author: Michal Hlavinka <mhlavink@redhat.com> 56-1
changelog:
  - Upgrade to 56 (#1479800)
  - fixes wait exit codes of co-processes when run in interactive mode (#1479320)


author: Michal Sekletar <msekleta@redhat.com> - 0.26-14
changelog:
  - start timer after the installation (#1278587)
  - make mlocate-updatedb.service of the type simple, systemd will then not wait for its completion (#1282232)


author: James Paul Turner <jamesturner246@fedoraproject.org> - 3.1.6-1
changelog:
  - Update to MPFR version 3.1.6
  - Use autosetup specfile macro for applying patches (patches 1 and 2 applied)
  - Removed iconv calls, as they were breaking .info files, which are now unicode
    resolves #1299649
  - Other minor cleanups
  - BuildRequire gcc per https://fedoraproject.org/wiki/Packaging:C_and_C%2B%2B#BuildRequires_and_Requires


author: Miroslav Lichvar <mlichvar@redhat.com> 6.0-14.20170916
changelog:
  - update to 6.0-20170916 (CVE-2017-13728 CVE-2017-13729 CVE-2017-13730
    CVE-2017-13731 CVE-2017-13732 CVE-2017-13733 CVE-2017-13734)


author: Miroslav Lichvar <mlichvar@redhat.com> 6.1-5.20180224
changelog:
  - fix crash in parsing of terminfo use capability (CVE-2018-10754)
  - add gcc-c++ to build requirements


author: Josef Ridky <jridky@redhat.com> - 1:5.8-14
changelog:
  - fix double free or corruption error when freeing security context (#1809077)
  - remove deprecated CFLAG


author: Michal Ruprich <mruprich@redhat.com> - 2.0-0.50.20160912git
changelog:
  - Resolves: 1557470 - netstat -i cut's interface names
  - Resolves: 1566084 - netstat -agn only shows 10 character interface name for IPv4 addressing


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 10.00-1
changelog:
  - Move the /etc/rwtab.d & /etc/statetab.d folders to 'filesystem'
  - specfile: fix failing build because of incorrect use of (aarch-64)


author: Nikos Mavrogiannopoulos <nmav@redhat.com> - 3.3-5
changelog:
  - Removed executables from the library to allow parallel installation
    of x86-64 and x86 packages. The executables had testing purpose, and
    may be re-introduced in a separate package if needed.


author: Tomáš Mráz <tmraz@redhat.com> - 3.4-4
changelog:
  - Cover the gaps in annotation coverage for assembler sources
  - Add .hmac checksums for FIPS mode integrity checking


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.52.20-4
changelog:
  - Python 2 binary package renamed to python2-newt
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Miroslav Lichvar <mlichvar@redhat.com> - 0.52.20-8
changelog:
  - rename newt-python3 subpackage to python3-newt
  - build python3 subpackage unconditionally
  - don't use unversioned python_sitearch macro
  - drop static subpackage
  - use macro for ldconfig scriptlets
  - add gcc to build requirements
  - fix description of python2-newt


author: Miroslav Lichvar <mlichvar@redhat.com> - 0.52.20-10
changelog:
  - move snack provides to python3-newt subpackage (#1640153)
  - fix radio button selection check in snack (#1714517)


author: Steve Dickson <steved@redhat.com> 0.3.5-2
changelog:
  - nfs4_getfacl: Add new option -c/--omit-header (bz 1698281)
  - nfs4_setfacl: Skip comment field while reading ACE(s) (bz 1687299)


author: Phil Sutter <psutter@redhat.com> [0.9.3-6.el8]
changelog:
  - monitor: Do not decompose non-anonymous sets (Phil Sutter) [1774742]
  - main: restore --debug (Phil Sutter) [1778883]
  - main: enforce options before commands (Phil Sutter) [1778883]


author: Phil Sutter <psutter@redhat.com> [0.9.3-8.el8]
changelog:
  - cache: Fix for doubled output after reset command (Phil Sutter) [1790793]
  - tests: shell: Search diff tool once and for all (Phil Sutter) [1790793]
  - xfrm: spi is big-endian (Phil Sutter) [1790963]


author: Phil Sutter <psutter@redhat.com> [0.9.3-9.el8]
changelog:
  - netlink: Avoid potential NULL-pointer deref in netlink_gen_payload_stmt() (Phil Sutter) [1793030]
  - netlink: Fix leaks in netlink_parse_cmp() (Phil Sutter) [1793030]
  - netlink: Fix leak in unterminated string deserializer (Phil Sutter) [1793030]


author: Phil Sutter <psutter@redhat.com> [0.9.3-10.el8]
changelog:
  - scanner: Extend asteriskstring definition (Phil Sutter) [1763652]
  - doc: nft.8: Mention wildcard interface matching (Phil Sutter) [1763652]
  - tests: py: Support testing host binaries (Phil Sutter) [1754047]
  - tests: monitor: Support testing host's nft binary (Phil Sutter) [1754047]
  - tests: monitor: Support running individual test cases (Phil Sutter) [1754047]
  - tests: json_echo: Support testing host binaries (Phil Sutter) [1754047]
  - tests: json_echo: Fix for Python3 (Phil Sutter) [1754047]


author: Phil Sutter <psutter@redhat.com> [0.9.3-11.el8]
changelog:
  - Package requires libnftnl-1.1.5-3 (Phil Sutter) [1795224]
  - src: Add support for concatenated set ranges (Phil Sutter) [1795224]
  - src: Add support for NFTNL_SET_DESC_CONCAT (Phil Sutter) [1795224]
  - include: resync nf_tables.h cache copy (Phil Sutter) [1795224]
  - parser: add a helper for concat expression handling (Phil Sutter) [1795224]


author: Dridi Boukelmoune <dridi@fedoraproject.org>- 2.1-1
changelog:
  - Update to 2.1
  - Upstream moved to github
  - Upstream switched to autotools
  - Disable --as-needed until it's patched upstream
  - Drop defunct 32bit x86 support
  - Add ppc64le support
  - Run the new test suite


author: luto@kernel.org - 1.9-1
changelog:
  - Update to 1.9
  - Certain fabric functionality may not work yet due to missing dracut
    support and missing hostid and hostnqn configuration.


author: Than Ngo <than@redhat.com> - 3.10.0-3
changelog:
  - Resolves: #1657683, can't establish libica token in FIPS mode
  - Resolves: #1652856, EP11 token fails when using Strict-Session mode or VHSM-Mode


author: Than Ngo <than@redhat.com> - 3.11.0-3
changelog:
  - Resolves: #1667941, 3des tests failures due to FIPS incompatible test scenarios
  - Resolves: #1651731, ep11 token: enhanced IBM z14 functions
  - Resolves: #1651732, ep11 token: support m_*Single functions from ep11 lib
  - Resolves: #1525407, use CPACF hashes in ep11 token
  - Resolves: #1651238, rebase to 3.11.0
  - Resolves: #1682530, gating


author: Jitka Plesnikova <jplesnik@redhat.com> - 2.4.46-2
changelog:
  - Perl 5.28 rebuild
  - MozNSS Compat. Layer: Fix typos, and spelling in the README file header (#1564161)


author: Matus Honek <mhonek@redhat.com> - 2.4.46-3
changelog:
  - MozNSS Compat. Layer: Make log messages more clear (#1598103)
  - MozNSS Compat. Layer: Fix memleaks reported by valgrind (#1595203)


author: Matus Honek <mhonek@redhat.com> - 2.4.46-6
changelog:
  - Build with LDAP_USE_NON_BLOCKING_TLS (#1594928)
  - Remove unused leftover MozNSS Compat. Layer references (cont.) (#1557967)


author: Jakub Jelen <jjelen@redhat.com> - 0.18.0-3
changelog:
  - Do not add pkcs11 module to NSS after installation
    (NSS is loading p11-kit modules by default)
  - Remove pkcs11-switch since there is nothing to switch to


author: Jakub Jelen <jjelen@redhat.com> - 0.19.0-1
changelog:
  - New upstream release fixing various CVE-2018-16418 - 16421, 16423 - 16427
  - Add support for RSA-PSS signatures


author: Jakub Jelen <jjelen@redhat.com> - 0.19.0-2
changelog:
  - Avoid mismatching coolkey cards for muscle ones (#1588722)
  - Implement legacy CAC1 driver (#1638052)
  - Disable pinpad
  - Fixup verification after RSA-PSS implementation


author: Jakub Jelen <jjelen@redhat.com> - 0.19.0-3
changelog:
  - Unbreak the RSA-PSS mechanisms (#1595626)
  - Unbreak the signing using hashed mechanisms in CardOS and others (#1644338)


author: Jakub Jelen <jjelen@redhat.com> - 0.19.0-4
changelog:
  - Unbreak the Dual CAC cards in PIV driver (#1651748)
  - Fix few more corner cases for handling different types of padding (#1595626)
  - Unbreak signature verification in pkcs11-tool (#1651748)


author: Jakub Jelen <jjelen@redhat.com> - 0.19.0-6
changelog:
  - Add support for Gemalto IDPrime smart cards (#1657970)
  - Fix 2k RSA key operations with Coolkey (#1766712)


author: Jakub Jelen <jjelen@redhat.com> - 7.7p1-6 + 0.10.3-4
changelog:
  - Fix listing of kex algoritms in FIPS mode
  - Allow aes-gcm cipher modes in FIPS mode
  - Coverity fixes


author: Jakub Jelen <jjelen@redhat.com> - 7.8p1-2 + 0.10.3-5
changelog:
  - New upstream release fixing CVE 2018-15473
  - Remove unused patches
  - Remove reference to unused enviornment variable SSH_USE_STRONG_RNG
  - Address coverity issues
  - Unbreak scp between two IPv6 hosts (#1620333)
  - Unbreak GSSAPI key exchange (#1624323)
  - Unbreak rekeying with GSSAPI key exchange (#1624344)


author: Jakub Jelen <jjelen@redhat.com> - 7.8p1-3 + 0.10.3-5
changelog:
  - Disable OpenSSH hardening flags and use the ones provided by system (#1630615)
  - Ignore unknown parts of PKCS#11 URI (#1631478)
  - Do not fail with GSSAPI enabled in match blocks (#1580017)
  - Fix the segfaulting cavs test (#1629692)


author: Jakub Jelen <jjelen@redhat.com> - 7.8p1-4 + 0.10.3-5
changelog:
  - Unbreak PKCS#11 URI tests (#1648262)
  - Allow to disable RSA signatures with SHA1 (#1648898)
  - Dump missing GSS options from client configuration (#1649505)
  - Minor fixes from Fedora related to GSSAPI and keberos
  - Follow the system-wide PATH settings


author: Jakub Jelen <jjelen@redhat.com> - 8.0p1-1 + 0.10.3-7
changelog:
  - New upstream release (#1691045)
  - Remove support for unused VendorPatchLevel configuration option
  - Fix kerberos cleanup procedures (#1683295)
  - Do not negotiate arbitrary primes with DH GEX in FIPS (#1685096)
  - Several GSSAPI key exchange improvements and sync with Debian
  - Allow to use labels in PKCS#11 URIs even if they do not match on private key (#1671262)
  - Do not fall back to sshd_net_t SELinux context (#1678695)
  - Use FIPS compliant high-level signature OpenSSL API and KDF
  - Mention crypto-policies in manual pages
  - Do not fail if non-FIPS approved algorithm is enabled in FIPS
  - Generate the PEM files in new PKCS#8 format without the need of MD5 (#1712436)


author: Jakub Jelen <jjelen@redhat.com> - 8.0p1-2 + 0.10.3-7
changelog:
  - Allow specifying a pin-value in PKCS #11 URI in ssh-add (#1639698)
  - Whitelist another syscall variant for s390x cryptographic module (ibmca engine) (#1714915)


author: Jakub Jelen <jjelen@redhat.com> - 8.0p1-3 + 0.10.3-7
changelog:
  - Fix typos in manual pages (#1668325)
  - Use the upstream support for PKCS#8 PEM files alongside with the legacy PEM files (#1712436)
  - Unbreak ssh-keygen -A in FIPS mode (#1732424)
  - Add missing RSA certificate types to offered hostkey types in FIPS mode (#1732449)


author: Tomáš Mráz <tmraz@redhat.com> 1.1.1c-6
changelog:
  - backport of S390x ECC CPACF enhancements from master
  - FIPS mode: properly disable 1024 bit DSA key generation
  - FIPS mode: skip ED25519 and ED448 algorithms in openssl speed
  - FIPS mode: allow AES-CCM ciphersuites


author: Tomáš Mráz <tmraz@redhat.com> 1.1.1c-8
changelog:
  - fix CVE-2019-1547 - side-channel weak encryption vulnerability
  - fix CVE-2019-1563 - padding oracle in CMS API
  - fix CVE-2019-1549 - ensure fork safety of the DRBG
  - fix handling of non-FIPS allowed EC curves in FIPS mode
  - fix TLS compliance issues


author: Tomáš Mráz <tmraz@redhat.com> 1.1.1c-14
changelog:
  - fix incorrect error return value from FIPS_selftest_dsa
  - S390x: properly restore SIGILL signal handler


author: Anderson Sasaki <ansasaki@redhat.com> - 0.4.8-1
changelog:
  - Update to 0.4.8-1
  - RSA key generation on the token
  - RSA-OAEP and RSA-PKCS encryption support
  - RSA-PSS signature support
  - Support for OpenSSL 1.1.1 beta
  - Removed support for OpenSSL 0.9.8
  - Various bug fixes and enhancements


author: Anderson Sasaki <ansasaki@redhat.com> - 0.4.8-2
changelog:
  - Require OpenSSL >= 1.0.2
  - Fixed missing declaration of ERR_get_CKR_code()
  - Add support to use EC keys and tests (#1625338)
  - Exposed check_fork() API
  - Fixed memory leak of RSA objects in pkcs11_store_key()
  - Updated OpenSSL license in eng_front.c
  - Fixed build for old C dialects
  - Allow engine to use private key without PIN
  - Require DEBUG to be defined to print debug messages
  - Changed package description


author: Anderson Sasaki <ansasaki@redhat.com> - 0.4.10-1
changelog:
  - Update to 0.4.10 (#1745082)
  - Add BuildRequires for OpenSSL >= 1.0.2, required for testing
  - Print tests logs if failed during build
  - Small bug fixes such as removal of unused variable
  - Search objects in all matching tokens (#1705505)


author: Neal Gompa <ngompa13@gmail.com> - 1.74-1
changelog:
  - Update to upstream version 1.74
  - Drop merged patches
  - Rediff remaining patches
  - Move newns to /usr/libexec/os-prober (debuginfo generation works)
  - Mark copyright file as license file


author: Tomáš Mráz <tmraz@redhat.com> 1.3.1-5
changelog:
  - pam_faillock: Support configuration file /etc/security/faillock.conf
  - pam_faillock: Support local_users_only option
  - pam_namespace: Support noexec, nosuid and nodev flags for tmpfs mounts
  - Drop tallylog and pam_tally[2] documentation
  - pam_lastlog: Do not display failed attempts with PAM_SILENT flag
  - pam_lastlog: Support unlimited option to override fsize limit
  - pam_unix: Log if user authenticated without password
  - pam_tty_audit: Improve manual page
  - Optimize closing fds when spawning helpers
  - Fix duplicate password verification in pam_authtok_verify()


author: Brian C. Lane <bcl@redhat.com> - 3.2-29
changelog:
  - Add support for NVDIMM devices (sparschauer)
  - libparted/labels: link with libiconv if needed (arnout)


author: Brian C. Lane <bcl@redhat.com> - 3.2-33
changelog:
  - Switch gpt-header-move and msdos-overlap to python3 (bcl)
    Resolves: rhbz#1595810
  - Modify gpt-header-move and msdos-overlap to work with py2 or py3 (bcl)
    Related: rhbz#1595810


author: Brian C. Lane <bcl@redhat.com> - 3.2-34
changelog:
  - Fix the length of several strncpy calls (bcl)
    Related: rhbz#1602652
  - parted.c: Always free peek_word (bcl)
    Related: rhbz#1602652
  - parted.c: Make sure dev_name is freed (bcl)
    Related: rhbz#1602652
  - t6100-mdraid-partitions: Use v0.90 metadata for the test (bcl)
  - Fix msdos-overlap to work correctly with py2 or py3 (bcl)
    Related: rhbz#1595810


author: Brian C. Lane <bcl@redhat.com> - 3.2-35
changelog:
  - Use python3-devel in buildroot
    Resolves: rhbz#1615576
  - linux.c: Use sys/sysmacros.h for major/minor
    Resolves: rhbz#1615592


author: Brian C. Lane <bcl@redhat.com> - 3.2-37
changelog:
  - Add CI tests
    Resolves: rhbz#1653912
  - t6000-dm: Stop using private lvm root
    Related: rhbz#1653912


author: Than Ngo <than@redhat.com> - 2.7.6-10
changelog:
  - CVE-2019-13636 , Don't follow symlinks unless --follow-symlinks is given
  - Resolves: #1665928, patch has a huge error output and segfaults when the file to be patched does not exist


author: Petr Pisar <ppisar@redhat.com> - 8.41-5
changelog:
  - Fix out-of-bounds read for partial matching of /./ against an empty string
    when the newline type is CRLF (upstream bug #2226)


author: Petr Pisar <ppisar@redhat.com> - 8.41-6
changelog:
  - Fix returning unset groups in POSIX interface if REG_STARTEND has a non-zero
    starting offset (upstream bug #2244)


author: Petr Pisar <ppisar@redhat.com> - 8.42-2
changelog:
  - Fix handling UTF and start-of-pattern options in C++ wrapper
    (upstream bug #2283)
  - Fix an error message and locale handling in pcregrep tool


author: Petr Pisar <ppisar@redhat.com> - 8.42-3
changelog:
  - Fix autopossessifying a repeated negative class with no characters less than
    256 that is followed by a positive class with only characters less than 256
    (bug #1619228)


author: Petr Pisar <ppisar@redhat.com> - 10.31-3
changelog:
  - Add support to pcre2grep for binary zeros in -f files (upstream bug #2222)
  - Fix compiler warnings in pcre2grep


author: Petr Pisar <ppisar@redhat.com> - 10.31-6
changelog:
  - Fix global search/replace in pcre2test and pcre2_substitute() when the pattern
    matches an empty string, but never at the starting offset


author: Petr Pisar <ppisar@redhat.com> - 10.31-7
changelog:
  - Fix checking that a lookbehind assertion has a fixed length if the
    lookbehind assertion is used inside a lookahead assertion
  - Fix parsing VERSION conditions


author: Petr Pisar <ppisar@redhat.com> - 10.31-8
changelog:
  - Fix backtracking atomic groups when they are not separated by something with
    a backtracking point


author: Petr Pisar <ppisar@redhat.com> - 10.31-9
changelog:
  - Recognize all Unicode space characters with /x option in a pattern
    (bug #1617960)
  - Fix changing dynamic options (bug #1617960)
  - Fix autopossessifying a repeated negative class with no characters less than
    256 that is followed by a positive class with only characters less than 255,
    (bug #1617960)
  - Fix autopossessifying a repeated negative class with no characters less than
    256 that is followed by a positive class with only characters less than 256,
    (bug #1617960)


author: Petr Pisar <ppisar@redhat.com> - 10.32-1
changelog:
  - 10.32 bump (bug #1628200)
  - Fix a subject buffer overread in JIT when UTF is disabled and \X or \R has
    a greater than 1 fixed quantifier (bug #1628200)
  - Fix matching a zero-repeated subroutine call at a start of a pattern
    (bug #1628200)
  - Fix heap limit checking overflow in pcre2_dfa_match() (bug #1628200)


author: Jarod Wilson <jarod@redhat.com> - 3.0-6
changelog:
  - Update to upstream 3.0-3.1.gb36a595 tarball for upstream fixes
  - Add in manpages
  - Related: rhbz#1365750
  - Resolves: rhbz#948476


author: Jarod Wilson <jarod@redhat.com> - 3.0-7
changelog:
  - Address a myriad more coverity/clang warnings
  - Add raw_ethernet_* man page symlinks
  - Related: rhbz#1273176
  - Related: rhbz#948476


author: Jitka Plesnikova <jplesnik@redhat.com> - 1.54-6
changelog:
  - Adjust to sqlite-3.22.0 (bug #1543286)
  - Add new index constraint ops introduced in SQLite 3.21.0 to PerlData


author: Jan Pazdziora <jpazdziora@redhat.com> - 6.56-1
changelog:
  - 1372494 - Rebase to upstream version 6.56.
  - 1372494 - Rebase to upstream version 6.55, build failed due to
    https://rt.cpan.org/Public/Bug/Display.html?id=117404.


author: Petr Pisar <ppisar@redhat.com> - 4:5.26.1-407
changelog:
  - Fix parsing braced subscript after parentheses (RT#8045)
  - Fix a heap use after free when moving a stack (RT#131954)
  - Call ldconfig scriptlets using a macro


author: Petr Pisar <ppisar@redhat.com> - 4:5.26.2-410
changelog:
  - 5.26.2 bump
  - Fix CVE-2018-6913 (heap buffer overflow in pp_pack.c) (bug #1567776)
  - Fix CVE-2018-6798 (heap read overflow in regexec.c) (bug #1567777)
  - Fix CVE-2018-6797 (heap write overflow in regcomp.c) (bug #1567778)


author: Petr Pisar <ppisar@redhat.com> - 4:5.26.2-412
changelog:
  - perl-devel requires redhat-rpm-config because of hardened compiler profiles
    (bug #1557667)
  - Do not clobber file bytes in :encoding layer (RT#132833)
  - Fix line numbers in multi-line s/// (RT#131930)
  - Fix parsing extended bracketed character classes (RT#132167)
  - Fix a possibly unitialized memory read in the Perl parser (RT#133074)
  - Fix an infinite loop in the regular expression compiler (RT#133185)


author: Petr Pisar <ppisar@redhat.com> - 4:5.26.2-413
changelog:
  - Adjust tests to gdbm-1.15 (RT#133295)
  - Fix an integer wrap when allocating memory for an environment variable
    (RT#133204)
  - Fix printing a warning about a wide character when matching a regular
    expression while ISO-8859-1 locale is in effect
  - Fix invoking a check for wide characters while ISO-8859-1 locale is in effect


author: Jitka Plesnikova <jplesnik@redhat.com> - 4:5.26.3-416
changelog:
  - 5.26.3 bump (bug #1655526)
  - Fix CVE-2018-18311 (integer overflow leading to buffer overflow) (bug #1654920)
  - Fix CVE-2018-18312 (heap buffer overflow in regcomp.c) (bug #1654922)
  - Fix CVE-2018-18313 (heap buffer overflow read in regcomp.c) (bug #1654924)
  - Fix CVE-2018-18314 (heap based buffer overflow) (bug #1654925)


author: Petr Pisar <ppisar@redhat.com> - 2.12-367
changelog:
  - Fix CVE-2017-6512 (setting arbitrary mode on an arbitrary file in rmtree()
    and remove_tree()) (bug #1457834)


author: Petr Pisar <ppisar@redhat.com> - 3.28-2
changelog:
  - Introduce a build-condition on groff
  - Rename a _without_tk build-condition to
    _without_perl_Pod_Perldoc_enables_tk_test


author: Paul Howarth <paul@city-fan.org> - 1:0.236-1
changelog:
  - Update to 0.236
    - Add Travis test configuration
    - Make test for PMC availability more reliable
    - Disable benchmark test rt62341.t as it runs out of memory on many smoker
      systems (CPAN RT#118310)
  - Simplify find command using -delete


author: Paul Howarth <paul@city-fan.org> - 1:0.237-1
changelog:
  - Update to 0.237
    - Don't load vars.pm (CPAN RT#132077)
  - Drop legacy Group: tag
  - Drop buildroot cleaning in %install section


author: Tomas Orsava <torsava@redhat.com> - 3.6.8-14
changelog:
  - Adding a new patch 329 that adds support for OpenSSL FIPS mode
  - Explicitly listing man pages in files section to fix an RPM warning
  Resolves: rhbz#1731424


author: Tomas Orsava <torsava@redhat.com> - 3.6.8-15
changelog:
  - Patch 329 that adds support for OpenSSL FIPS mode has been improved and
    bugfixed
  Resolves: rhbz#1744670 rhbz#1745499 rhbz#1745685


author: Charalampos Stratakis <cstratak@redhat.com> - 3.6.8-16
changelog:
  - Properly pass the -Og optimization flag to the debug build
  Resolves: rhbz#1712977 and rhbz#1714733


author: Charalampos Stratakis <cstratak@redhat.com> - 3.6.8-18
changelog:
  - Reduce the number of tests running during the profile guided optimizations build
  - Enable profile guided optimizations for all the supported architectures
  Resolves: rhbz#1749576


author: Charalampos Stratakis <cstratak@redhat.com> - 3.6.8-19
changelog:
  - Skip windows specific test_get_exe_bytes test case and enable test_distutils
  Resolves: rhbz#1754040


author: Tomas Orsava <torsava@redhat.com> - 3.6.8-21
changelog:
  - Patch 329 (FIPS) modified: Added workaround for mod_ssl:
    Skip error checking in _Py_hashlib_fips_error
  Resolves: rhbz#1760106


author: Tomas Orsava <torsava@redhat.com> - 3.6.8-22
changelog:
  - Changed Requires into Recommends for python3-pip to allow a lower RHEL8
    footprint for containers and other minimal environments
  Resolves: rhbz#1756217


author: Charalampos Stratakis <cstratak@redhat.com> - 3.6.8-23
changelog:
  - Modify the test suite to better handle disabled SSL/TLS versions and FIPS mode
  - Use OpenSSL's DRBG and disable os.getrandom() function in FIPS mode
  Resolves: rhbz#1754028, rhbz#1754027, rhbz#1754026, rhbz#1774471


author: Tomas Orsava <torsava@redhat.com> - 9.0.3-5
changelog:
  - Split part of the python3-pip package into platform-python-pip
  - python3-pip will only contain binaries in /usr/bin
  - Resolves: rhbz#1638836


author: Lumír Balhar <lbalhar@redhat.com> - 9.0.3-6
changelog:
  - python3-pip requires python36 and obsoletes previous version
    where python3- and platform-python- were in one package
  - Resolves: rhbz#1638836


author: Tomas Orsava <torsava@redhat.com> - 9.0.3-10
changelog:
  - Bump the NVR so it's higher than previous builds of python3-pip that have
    mistakenly gotten into the python27 module build when we were dealing with an
    MBS filtering problem. See BZ#1650568.
  - Resolves: rhbz#1638836


author: Victor Stinner <vstinner@redhat.com> - 9.0.3-11
changelog:
  - Prevent removing of the system packages installed under /usr/lib
    when pip install -U is executed. Patch by Michal Cyprian.
    Resolves: rhbz#1626408.


author: Miro Hrončok <mhroncok@redhat.com> - 9.0.3-13
changelog:
  - Use the system level root certificate instead of the one bundled in certifi
  - Resolves: rhbz#1655255


author: Lumír Balhar <lbalhar@redhat.com> - 9.0.3-16
changelog:
  - Add four new patches for CVEs in bundled urllib3 and requests
  CVE-2018-20060, CVE-2019-11236, CVE-2019-11324, CVE-2018-18074
  Resolves: rhbz#1649153
  Resolves: rhbz#1700824
  Resolves: rhbz#1702473
  Resolves: rhbz#1643829


author: Lumír Balhar <lbalhar@redhat.com> - 39.2.0-4
changelog:
  - New subpackage platform-python-setuptools without files from /usr/bin/*
  - python3-setuptools contains only files from /usr/bin/* and depends
    on platform-python-setuptools
  - Resolves: rhbz#1641973


author: Petr Lautrbach <plautrba@redhat.com> - 2.8-16.1
changelog:
  - semanage: move valid_types initialisations to class constructors
  - semanage: import sepolicy only when it's needed
  - sepolicy: Add sepolicy.load_store_policy(store)
  - semanage: Start exporting "ibendport" and "ibpkey" entries


author: Petr Lautrbach <plautrba@redhat.com> - 2.9-4
changelog:
  - semanage: Do not use default s0 range in "semanage login -a" (#1554360)
  - gui: Fix remove module in system-config-selinux (#1748763)


author: Vit Mojzis <vmojzis@redhat.com> - 2.9-5
changelog:
  - fixfiles: Fix "verify" option (#1647532)
  - semanage: Improve handling of "permissive" statements (#1417455)
  - semanage: fix moduleRecords.customized()
  - semanage: Add support for DCCP and SCTP protocols (#1563742)


author: Jan Rybar <jrybar@redhat.com> - 0.115-2
changelog:
  - Error message about getting authority is too elaborate (forward of #1342855)
  - Bus disconnection report moved to debug mode (forward of #1249627)


author: Jan Rybar <jrybar@redhat.com> - 0.115-7
changelog:
  - pkttyagent: polkit-agent-helper-1 timeout leaves tty echo disabled
  - Mitigation of regression caused by fix of CVE-2018-19788
  - Resolves: rhbz#1693781
  - Resolves: rhbz#1693814


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2:3.3.1-10
changelog:
  - Release bump and rebuild for relengs to be able to ship postfix-pcre,
    postfix-cdb, postfix-sqlite
    Resolves: rhbz#1745321


author: Than Ngo <than@redhat.com> - 2.7.4-3
changelog:
  - create diag_disk path part of installation
  - diags: Increase buffer length size to read complete system vpd information
  - diags: Remove timestamp from disk health log file
  - diags: Create diag_disk log directory manually if not present
    Resolves: #1657757


author: Michal Sekletár <msekleta@redhat.com> - 0.1.0-5
changelog:
  - if interface has name in expected format print it to stdout (#1643515)
  - don't assign names to virtual devices (#1644294)


author: Jan Rybar <jrybar@redhat.com> - 6.6.3-2
changelog:
  - lastcomm: added new --pid option to show process PID and PPID
  - changelog update: 6.6.3-1 author change
  - spec file update: added correct access mode to created /var/account/pacct


author: Jan Rybar <jrybar@redhat.com> - 23.1
changelog:
  - Rebase to the newest upstream official release
  - Source0 updated to latest functional SourceForge URL format
  - peekfd manpage now not present if peekfd binary missing on given architecture
  - URL of the project updated
  - new tool pslog added with rebase
  - Resolves: #1460695


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 3.0.4-3
changelog:
  - Python 2 binary package renamed to python2-chardet
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 1:1.1.fb23-4
changelog:
  - Python 2 binary package renamed to python2-configshell
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Christian Heimes <cheimes@redhat.com> - 2.2.1-2
changelog:
  - Drop Python 2 subpackages from RHEL 8, fixes RHBZ#1589754
  - Remove unnecessary copy and shebang mangling


author: Christian Heimes <cheimes@redhat.com> - 2.3-1
changelog:
  - New upstream release 2.3
  - Fix AEAD tag truncation bug, CVE-2018-10903, RHBZ#1602755, RHBZ#1602932


author: Iryna Shcherbina <ishcherb@redhat.com> - 1:2.6.1-2
changelog:
  - Fix ambiguous Python 2 dependency declarations
    (See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3)


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 1.2.4-9
changelog:
  - Python 2 binary package renamed to python2-dbus
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 1.2.4-10
changelog:
  - Also add Provides for the old name without %_isa
  - Use %python_provide for the python3 subpackage and drop manual Provide which
    conflicts with %python_provide in the python2 subpackage.


author: Miro Hrončok <mhroncok@redhat.com> - 0.13-1
changelog:
  - Updated to 0.13
  - Added python3 and python2 subpackages
  - Add --with tests
  - Modernize spec
  - Remove merged patch
  - Update upstream URL


author: Lumír Balhar <lbalhar@redhat.com> - 0.14-3
changelog:
  - Backport patch from upstream/rhel7 which allows pifconfig to show
    multiple IPv4 addresses for each interface
  - Move patches to dist-git
  - Resolves: rhbz#1652174


author: Carl George <carl@george.computer> - 1.6.1-1
changelog:
  - Latest upstream
  - Add patch0 to remove pytest-{cov,runner} deps
  - Share doc and license dir between subpackages
  - Enable EPEL PY3 build


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.9-16
changelog:
  - Python 2 binary package renamed to python2-kmod
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: John Dennis <jdennis@redhat.com> - 2.0.1-1
changelog:
  - Upgrade to upstream 2.0.1
  - port from jwt to jwcrypto (conditional build)
  - bring into alignment with rhel spec file


author: mulhern <amulhern@redhat.com> - 0.19.0
changelog:
  - Never raise a DeviceNotFoundError when iterating over a device enumeration
  - Device.subsystem() now returns None if device has no subsystem
  - Add DeprecationWarnings to deprecated Device methods
  - Replace "/" with "!" in Device.from_name() sys_name parameter
  - Add some unstable classes for parsing some kinds of values
  - Make version info more like Python's including micro numbers and levels
  - Refactor some internal modules into subdirectories
  - Work on tests and reproducers


author: mulhern <amulhern@redhat.com> - 0.20.0
changelog:
  - Remove parsing code added in previous release
  - No longer do CI for Python 2.6
  - Eliminate all wildcard imports and __all__ statements
  - No longer use deprecated Device.from_sys_path() method
  - Minor pylint induced changes
  - Documentation fixes


author: mulhern <amulhern@redhat.com> - 0.21.1
changelog:
  - Deprecate use of Device object as mapping from udev property names to values
  - Add a Properties class and a Device.properties() method for udev properties
  - Fix places where Device object was incorrectly used in a boolean context
  - Return an empty string, not None, if the property value is an empty string
  - Exceptions re-raised from libudev calls now have a message string
  - Insert a warning about using a Device in a boolean context in docs
  - Infrastructure for vagrant tests is removed
  - Various internal refactorings
  - Extensive test improvements
  - Numerous documentation fixes


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.10.0-3
changelog:
  - Python 2 binary package renamed to python2-pywbem
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Tony Asleson <tasleson@redhat.com> - 0.11.0-8
changelog:
  - Fix the conflict with sblim-wbemcli: RHBZ #1757855
  - Corrected warning about multiple file inclusion


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 3.12-6
changelog:
  - Python 2 binary package renamed to python2-pyyaml
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Miro Hrončok <mhroncok@redhat.com> - 3.12-12
changelog:
  - Rename python3-PyYAML to python3-pyyaml
  - Modernize spec
  - Fix python2 invocation

  - Cherry-picked from: https://src.fedoraproject.org/rpms/PyYAML/pull-request/2


author: Tomas Orsava <torsava@redhat.com> - 2.18.4-6
changelog:
  - Skip all tests needing httpbin: httpbin has too many dependencies to be
    shipped in RHEL just for build-time package tests


author: Florian Festi <ffesti@redhat.com> - 4.14.2-31
changelog:
  - Parallelize /usr/lib/rpm/brp-strip-static-archive (#1691824)
  - Parallelize /usr/lib/rpm/check-buildroot (#1704354)


author: Maurizio Lombardi <mlombard@redhat.com> - 2.1.fb67-4
changelog:
  - epydoc is used only with python2 but the latter is not supported in RHEL8
    I remove the dependency


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.5-5
changelog:
  - Python 2 binary package renamed to python2-schedutils
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Vit Mojzis <vmojzis@redhat.com> - 4.2.1-3
changelog:
  - Use 
    CFLAGS="${CFLAGS:--O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mcpu=power8 -mtune=power8 -funwind-tables -fstack-clash-protection}" ; export CFLAGS ; 
    CXXFLAGS="${CXXFLAGS:--O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mcpu=power8 -mtune=power8 -funwind-tables -fstack-clash-protection}" ; export CXXFLAGS ; 
    FFLAGS="${FFLAGS:--O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mcpu=power8 -mtune=power8 -funwind-tables -fstack-clash-protection -I/usr/lib64/gfortran/modules}" ; export FFLAGS ; 
    FCFLAGS="${FCFLAGS:--O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mcpu=power8 -mtune=power8 -funwind-tables -fstack-clash-protection -I/usr/lib64/gfortran/modules}" ; export FCFLAGS ; 
    LDFLAGS="${LDFLAGS:--Wl,-z,relro  -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld}" ; export LDFLAGS instead of -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mcpu=power8 -mtune=power8 -funwind-tables -fstack-clash-protection


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.6.4-8
changelog:
  - Python 2 binary package renamed to python2-slip
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.6.4-10
changelog:
  - Also rename python-slip-dbus and python-slip-gtk to python2-*
  - Add missing %python_provide macros
  - Use new python2- names in dependencies


author: Tomas Orsava <torsava@redhat.com> - 1.24.2-1
changelog:
  - Rebased to 1.24.2 to fix CVE-2019-11324
  - Added patches for CVE-2019-11236 (AKA CVE-2019-9740)
  - Resolves: rhbz#1703361 rhbz#1706026


author: Lumír Balhar <lbalhar@redhat.com> - 1.24.2-3
changelog:
  - Enable TLS 1.3 post-handshake authentication
  - Adjust RECENT_DATE variable according to rules
  Resolves: rhbz#1726743


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 1.3.0-11
changelog:
  - Python 2 binary package renamed to python2-urwid
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: David Cantrell <dcantrell@redhat.com> - 1.3.1-2
changelog:
  - Apply upstream fix for EINTR handling in test_vterm test case
  - Apply upstream fix for test_remove_watch_file flakiness
  - Apply upstream fix for test_vterm handling of NUL characters


author: Petr Pisar <ppisar@redhat.com> - 1:4.04-3
changelog:
  - rpcgen tool split from glibc-common package
  - Pass TIRPC header files location to all RPC compilation units
  - Do not iterate over negative UIDs in repquota
  - Fix mistakes in warnquota reported by GCC 8


author: Petr Pisar <ppisar@redhat.com> - 1:4.04-4
changelog:
  - Avoid questions in quotacheck non-interactive mode
  - Report an error when quotacheck fails to cache quota files
  - Report an error if quota file magic is invalid


author: René Genz <liebundartig@freenet.de> - 0.16.3-12
changelog:
  - use correct authselect syntax for *-disable-logins to fix rhbz#1558245
  - Iryna Shcherbina <ishcherb@redhat.com>
    Update Python 2 dependency declarations to new packaging standards
    (See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3)


author: Sumit Bose <sbose@redhat.com> - 0.16.3-13
changelog:
  - Add latests patches from RHEL7
  - Add polkit runtime dependency
    Resolves: rhbz#1577179
  - Drop python2 build dependency
    Resolves: rhbz#1595813
  - Fix documentation reference in systemd unit file
    Resolves: rhbz#1596325


author: Sumit Bose <sbose@redhat.com> - 0.16.3-14
changelog:
  - Fix python BuildRequires
    Resolves: rhbz#1615564
  - Add RHEL specific patch for IPA
    Resolves: rhbz#1615320
  - Fix issues found by Coverity
    Resolves: rhbz#1602677


author: Sumit Bose <sbose@redhat.com> - 0.16.3-17
changelog:
  - rebuild fails if DISTRO variable is exported
    Resolves: rhbz#1747454
  - realmd.conf user-principal RFE and clarification
    Resolves: rhbz#1747452
  - realmd.conf documentation incorrect
    Resolves: rhbz#1747457
  - Document realmd.conf and how realmd reads the configuration
    Resolves: rhbz#1747456


author: Neil Horman <nhorman@redhat.com> - 6.8-2
changelog:
  - Fix erroneous message due to bad errno check (bz 1776710)
  - Enable addition of 0 value for fill-watermark (bz 1776710)


author: Ondrej Vasik <ovasik@redhat.com> 0.1-13
changelog:
  - copy content of /etc/skel directory for root as posstrans,
    don't overwrite  existing files (#999114)


author: Steve Dickson <steved@redhat.com> - 1.2.5-1
changelog:
  - Fixed stack buffer overflow in rpcinfo (bz 1637565)
  - Make sure /var/lib/rpcbind exists (bz 1628901)


author: Petr Stodulka <pstodulk@redhat.com> - 4.2.2-14
changelog:
  - remove meaningless redefinition of _bindir - it's standard macro now;
    sed will be store in /usr/bin/sed
    Resovles: #1305835


author: Jakub Martisko <jamartis@redhat.com> - 4.4-4
changelog:
  - When editing file inplace, the SELinux context should
    be based on the link instead of the target file itself.
    --follow-symlinks option remains unchanged
  - Resolves: #1401442


author: Lukas Vrabec <lvrabec@redhat.com> - 3.14.3-37
changelog:
  - Make stratisd_t domain unconfined for RHEL-8.2
  Resolves: rhbz#1791557
  - stratisd_t policy updates
  Resolves: rhbz#1791557


author: Lukas Vrabec <lvrabec@redhat.com> - 3.14.3-39
changelog:
  - Allow vhostmd communication with hosted virtual machines
  - Add and update virt interfaces
  Resolves: rhbz#1782925


author: Zdenek Pytela <zpytela@redhat.com> - 3.14.3-41
changelog:
  - Allow NetworkManager read its unit files and manage services
  - Mark nm-cloud-setup systemd units as NetworkManager_unit_file_t
  Resolves: rhbz#1806894


author: Zdenek Pytela <zpytela@redhat.com> - 3.14.3-41.1
changelog:
  - Allow ssh-keygen create file in /var/lib/glusterd
  Resolves: rhbz#1821759
  - Update ctdbd_manage_lib_files() to also allow mmap ctdbd_var_lib_t files
  Resolves: rhbz#1821226
  - Remove container interface calling by named_filetrans_domain.


author: Ondrej Vasik <ovasik@redhat.com> - 2.12.0-1
changelog:
  - move /etc/networks from initscripts to setup
  - move /etc/profile.d/lang.{sh,csh} from initscripts to setup


author: Ondrej Vasik <ovasik@redhat.com> - 2.12.2-2
changelog:
  - do not ship /etc/hosts.allow and /etc/hosts.deny (no need for them
    as we don't allow tcp_wrappers in RHEL8, #1663556)


author: Martin Osvald <mosvald@redhat.com> - 2.12.2-3
changelog:
  - add pcp user to /etc/aliases (#1744089)
  - set PATH if it is empty in csh.login (#1744104)
  - lang.csh: prevent grep from failing so scripts do not end
    prematurely when tcsh -e option in use (#1678706)
  - use full path for non-builtins (#1688302)
  - add nrpe tcp port 5666 to /etc/services (#1730396)


author: Tomas Bzatek <tbzatek@redhat.com> - 1.44-3
changelog:
  - Fix sg_turs help invocation in an old mode (#1683343)
  - Fix sg_raw printing error about device not specified on version request (#1627657)


author: Björn Esser <besser82@fedoraproject.org> - 2:4.5-9
changelog:
  - Add patch to include crypt.h, if present
  - Use %make_{build,install} macros
  - Refresh other patches for proper alignment


author: Tomáš Mráz <tmraz@redhat.com> - 2:4.6-1
changelog:
  - Update to current upstream release 4.6
  - Raise limit for passwd and shadow entry length but also prevent
    writing longer entries (#1422497)


author: Tomáš Mráz <tmraz@redhat.com> - 2:4.6-5
changelog:
  - use cap_setxid file capabilities for newxidmap instead of making them setuid
  - limit the SYS_U/GID_MIN value to 1 as the algorithm does not work with 0
    and the 0 is always used by root anyway
  - manual page improvements
  - flush sssd caches - patch by Jakub Hrozek


author: Tomáš Mráz <tmraz@redhat.com> - 2:4.6-8
changelog:
  - properly audit group password change
  - do not add uid of a new (not yet added) user to the audit message
  - use lckpwdf() again to disable concurrent edits of databases by
    other applications
  - clarify chage manual page in regards to shadow and passwd
    inconsistency
  - fix minor issues in groupadd and login.defs manual pages
  - Ignore LOGIN_PLAIN_PROMPT variable in login.defs
  - force regeneration of getdate.c otherwise the date parsing fix
    is not applied


author: Martin Gieseking <martin.gieseking@uos.de> - 1.1.4-2
changelog:
  - Rebuilt with https://github.com/google/snappy/archive/1.1.4.tar.gz since
    %{source0} contains different and buggy code.
    https://groups.google.com/forum/#!topic/snappy-compression/uhELq553TrI


author: Pavel Moravec <pmoravec@redhat.com> = 3.7-2
changelog:
  - [sar] collect whole sar log dir
    Resolves: bz1714243
  - [archive] convert absolute symlink targets to relative
    Resolves: bz1702806
  - [archive] Handle checking container sysroot in _make_leading_paths
    Resolves: bz1728214
  - [frr] FRR plugin
    Resolves: bz1709906
  - [policies] redhat policy to use hostname instead of rhn id
    Resolves: bz1718087
  - Updates to vdsm plugin
    Resolves: bz1700780


author: Pavel Moravec <pmoravec@redhat.com> = 3.7-3
changelog:
  - [openstack] Extract Placement plugin from Nova
    Resolves: bz1717882
  - [utilities] Fix high CPU usage and slow command collection
    Resolves: bz1733352
  - [peripety] collect proper config file
    Resolves: bz1665981
  - [sosreport,plugins] Stop plugin execution after timeout hit
    Resolves: bz1733469
  - [nvme] collect config file everytime
    Resolves: bz1665929


author: Pavel Moravec <pmoravec@redhat.com> = 3.7-6
changelog:
  - [ovirt_hosted_engine] Add gluster deployment and cleanup log
    Resolves: bz1744086
  - [vdsm]: Fix executing shell commands
    Resolves: bz1744110
  - [ovn_*] Add support to containerized setups
    Resolves: bz1744553
  - [ipa] collect ipa-healthcheck logs, kdcproxy configs, httpd cert
    Resolves: bz1688764


author: Pavel Moravec <pmoravec@redhat.com> = 3.8-2
changelog:
  - [plugins] improve heuristic for applying --since
    Resolves: bz1789049
  - [Predicate] Override __bool__ to allow py3 evaluation
    Resolves: bz1789018
  - [ceph] Add 'ceph insights' command output
    Resolves: bz1783034
  - [dnf] Collect dnf module list
    Resolves: bz1781819
  - [kernel,networking] collect bpftool net list for each
    Resolves: bz1768956
  - [libreswan] New plugin for "libreswan" IPsec
    Resolves: bz1741330
  - [kernel] collect "bpftool net list"
    Resolves: bz1721779
  - [grub2] call grub2-config with --no-grubenv-update
    Resolves: bz1709682


author: Petr Kubat <pkubat@redhat.com> - 3.26.0-1
changelog:
  - Updated to version 3.26.0 (https://sqlite.org/releaselog/3_26_0.html)
    Fixes fts3/4 corrupt database exploit (#1659684)


author: Ondrej Dubaj <odubaj@redhat.com> - 3.26.0-5
changelog:
  - Fixed CVE-2019-13752 (#1786529) 
  - Fixed CVE-2019-13753 (#1786535) 
  - Fixed CVE-2019-13734 (#1786509) 
  - Fixed CVE-2019-19924 (#1789776)
  - Fixed CVE-2019-19923 (#1789812)
  - Fixed CVE-2019-19925 (#1789808)
  - Fixed CVE-2019-19959 (#1789823)


author: Abhi Das <adas@redhat.com> - 4.3-19
changelog:
  - rhbz#1602698 - Fix coverity issues
    rhbz#1624173 - Fix annocheck failures
    rhbz#1716278 - limit max cpus in mksquashfs
    Resolves: rhbz#1602698, rhbz#1624173, rhbz#1716278


author: Eugene Syromiatnikov <esyr@redhat.com> - 4.23-4
changelog:
  - Fix tests build with fresh glibc that now provides struct statx in sys/stat.h.
  - Resolves #1611749.


author: Eugene Syromiatnikov <esyr@redhat.com> - 4.24-2
changelog:
  - Add transition for strace32 package pn those architectures that
    provided it in RHEL 7 (ppc64 and s390x).


author: Eugene Syromiatnikov <esyr@redhat.com> - 4.24-4
changelog:
  - Sync up thread handling unfairness fix with the upstream version.
  - Fix "xlat_idx: Unexpected xlat value 0 at index ..." messages (#1660759).
  - Remove "ptrace(SYSCALL): No such process" messages (#1662936).
  - Wire up rseq and kexec_file_load on aarch64 (#1676045).


author: Eugene Syromiatnikov <esyr@redhat.com> - 4.24-6
changelog:
  - Pull upstream fix for ioctl evdev bitset decoding, fix the tests (#1747214).
  - Include commit v4.26~65 "s390x: beautify sthyi data tail prints" (#1747514).
  - Include upstream patches that fix issues reported by covscan (#1747526):
    91281fec "v4l2: avoid shifting left a signed number by 31 bit",
    522ad3a0 "syscall.c: avoid infinite loop in subcalls parsing",
    9446038e "kvm: avoid bogus vcpu_info assignment in vcpu_register", and
    2b64854e "xlat: use unsgined type for mount_flags fallback values".


author: Eugene Syromiatnikov <esyr@redhat.com> - 4.24-7
changelog:
  - Fix printing stack traces for early syscalls on process attach (#1790053):
    69b2c33a "unwind-libdw: fix initialization of libdwfl cache" and
    8e515c74 "tests: add strace-k-p test".
  - Properly decode struct sockaddr_hci without hci_channel field.
  - Update tests-m32/ioctl_evdev.c and tests-mx32/ioctl_evdev.c
    in 0002-evdev-fix-decoding-of-EVIOCGBIT-0.patch.
  - Update tests-m32/Makefile.in and tests-mx32/Makefile.in
    in 0032-tests-check-decoding-of-successful-evdev-ioctl.patch.


author: Eugene Syromiatnikov <esyr@redhat.com> - 4.24-8
changelog:
  - Fix expected alignment for IPC tests (#1795251):
    4377e3a1 "tests: fix expected output for some ipc tests", and
    a75c7c4b "tests: fix -a argument in ipc_msgbuf-Xraw test".
  - Update tests-m32/looping_threads.test and tests-mx32/looping_threads.test
    in 0025-tests-check-tracing-of-looping-threads.patch.
  - Update the bpf syscall decoder:
    d6c71dd0 "Fix preprocessor indentation",
    cabd6955 "bpf: print struct bpf_prog_info.gpl_compatible",
    14a9b6ca "bpf: add support for btf_* fields in BPF_MAP_CREATE",
    27bd13d3 "bpf: add support for btf_* fields in struct bpf_map_info",
    d1f90bcd "bpf: add support for *jited_ksyms and *jited_func_lens fields
             in struct bpf_prog_info", and
    940fe50f "bpf: add support for new twelve fields in struct bpf_prog_info".
    c661605b "tests: robustify bpf-obj_get_info_by_fd test against future kernels"


author: Eugene Syromiatnikov <esyr@redhat.com> - 4.24-9
changelog:
  - Fix the "extra tokens at end of #ifdef directive" warning:
    579f2702 "bpf: exclude bit fields from the check".


author: Daniel Kopecek <dkopecek@redhat.com> - 1.8.25-2
changelog:
  - Depend explicitly on /usr/sbin/sendmail instead of sendmail (rhel-7 sync)
  - Simplified pam configuration file by removing duplicate pam stack entries
  Resolves: rhbz#1633144


author: Radovan Sroka <rsroka@redhat.com> - 1.8.25-5
changelog:
  - RHEL 8.1 ERRATUM
  - Fixed problem with sudo-1.8.23 and 'who am i'
  Resolves: rhbz#1673886
  - Backporting sudo bug with expired passwords
  Resolves: rhbz#1676819


author: Radovan Sroka <rsroka@redhat.com> - 1.8.25-6
changelog:
  - RHEL 8.1 ERRATUM
  - Fixed The LDAP backend which is not properly parsing sudoOptions,
    resulting in selinux roles not being applied
  Resolves: rhbz#1738326


author: Radovan Sroka <rsroka@redhat.com> - 1.8.28p1-1
changelog:
  - RHEL 8.2 ERRATUM
  - rebase to 1.8.28p1
  Resolves: rhbz#1733961
  - fixed man page for always_set_home
  Resolves: rhbz#1576880
  - sudo does not work with notbefore/after
  Resolves: rhbz#1679508
  - NOTBEFORE showing value of sudoNotAfter Ldap attribute
  Resolves: rhbz#1715516
  - CVE-2019-14287 sudo
  - Privilege escalation via 'Runas' specification with 'ALL' keyword
  Resolves: rhbz#1760697


author: Robert Scheck <robert@fedoraproject.org> - 6.04-0.3
changelog:
  - Own %{_datadir}/syslinux/diag directory (#894529)
  - Allow rebuilding on RHEL/CentOS 6 and 7 (#1291428)


author: Jan Tulak <jtulak@redhat.com> - 1.2-1
changelog:
  - Upstream release 1.2 which fixes:
  - use pwquality to test password strength for cryptsetup (#1141871)
  - add multipath detection support (#1309729)
  - add migrate command (#1014708)


author: Jan Tulak <jtulak@redhat.com> - 1.2-3:
changelog:
  - Gating tests implementation, which meant adding few more changes
    to the existing patches (#1681969)
  - sphinx patch was merged to python3 change
  - add seq numbers to patch files


author: Jan Tulak <jtulak@redhat.com> - 1.4-1:
changelog:
  - Bring changes from upstream 1.4 (mostly bugfixes)
  - Remove multipath from the list of default backends (rhbz#1685019)
  - Fix locale issue (rhbz#1679587)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-21
changelog:
  - test-cpu-set-util: fix comparison for allocation size (#1734787)
  - test-cpu-set-util: fix allocation size check on i386 (#1734787)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-23
changelog:
  - catalog: fix name of variable (#1677768)
  - cryptsetup: add keyfile-timeout to allow a keydev timeout and allow to fallback to a password if it fails. (#1763155)
  - cryptsetup: add documentation for keyfile-timeout (#1763155)
  - cryptsetup: use unabbrieviated variable names (#1763155)
  - cryptsetup: don't assert on variable which is optional (#1763155)
  - cryptsetup-generator: guess whether the keyfile argument is two items or one (#1763155)
  - crypt-util: Translate libcryptsetup log level instead of using log_debug() (#1776408)
  - cryptsetup: add some commenting about EAGAIN generation (#1776408)
  - cryptsetup: downgrade a log message we ignore (#1776408)
  - cryptsetup: rework how we log about activation failures (#1776408)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-24
changelog:
  - rules: reintroduce 60-alias-kmsg.rules (#1739353)
  - sd-bus: make rqueue/wqueue sizes of type size_t (CVE-2020-1712)
  - sd-bus: reorder bus ref and bus message ref handling (CVE-2020-1712)
  - sd-bus: make sure dispatch_rqueue() initializes return parameter on all types of success (CVE-2020-1712)
  - sd-bus: drop two inappropriate empty lines (CVE-2020-1712)
  - sd-bus: initialize mutex after we allocated the wqueue (CVE-2020-1712)
  - sd-bus: always go through sd_bus_unref() to free messages (CVE-2020-1712)
  - bus-message: introduce two kinds of references to bus messages (CVE-2020-1712)
  - sd-bus: introduce API for re-enqueuing incoming messages (CVE-2020-1712)
  - sd-event: add sd_event_source_disable_unref() helper (CVE-2020-1712)
  - polkit: when authorizing via PK let's re-resolve callback/userdata instead of caching it (CVE-2020-1712)
  - sysctl: let's by default increase the numeric PID range from 2^16 to 2^22 (#1744214)
  - journal: do not trigger assertion when journal_file_close() get NULL (#1788085)
  - journal: use cleanup attribute at one more place (#1788085)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-25
changelog:
  - sd-bus: use "queue" message references for managing r/w message queues in connection objects (CVE-2020-1712)
  - pid1: make sure to restore correct default values for some rlimits (#1789930)
  - main: introduce a define HIGH_RLIMIT_MEMLOCK similar to HIGH_RLIMIT_NOFILE (#1789930)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-26
changelog:
  - seccomp: introduce seccomp_restrict_suid_sgid() for blocking chmod() for suid/sgid files (#1687512)
  - test: add test case for restrict_suid_sgid() (#1687512)
  - core: expose SUID/SGID restriction as new unit setting RestrictSUIDSGID= (#1687512)
  - analyze: check for RestrictSUIDSGID= in "systemd-analyze security" (#1687512)
  - man: document the new RestrictSUIDSGID= setting (#1687512)
  - units: turn on RestrictSUIDSGID= in most of our long-running daemons (#1687512)
  - core: imply NNP and SUID/SGID restriction for DynamicUser=yes service (#1687512)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-28
changelog:
  - pid1: fix DefaultTasksMax initialization (#1809037)
  - cgroup: make sure that cpuset is supported on cgroup  v2 and disabled with v1 (#1808940)
  - test: introduce TEST-36-NUMAPOLICY (#1808940)
  - test: replace `tail -f` with journal cursor which  should be more reliable (#1808940)
  - test: support MPOL_LOCAL matching in unpatched strace  versions (#1808940)
  - test: make sure the strace process is indeed dead (#1808940)
  - test: skip the test on systems without NUMA support (#1808940)
  - test: give strace some time to initialize (#1808940)
  - test: add a simple sanity check for systems without  NUMA support (#1808940)
  - test: drop the missed || exit 1 expression (#1808940)
  - test: replace cursor file with a plain cursor (#1808940)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-30
changelog:
  - pid1: fix the names of AllowedCPUs= and AllowedMemoryNodes= (#1824129)
  - core: fix re-realization of cgroup siblings (#1824129)
  - basic: use comma as separator in cpuset cgroup cpu ranges (#1824129)


author: Pavel Raiskup <praiskup@redhat.com> - 1.29-3
changelog:
  - revert back some docs
  - fix --create to use --xattrs-include/exclude (rhbz#1341787)
  - don't hang with '-x --skip-old-files --xattrs' (rhbz#1399036)


author: Pavel Raiskup <praiskup@redhat.com> - 1.30-1
changelog:
  - rebase to latest upstream release, per release notes
    http://lists.gnu.org/archive/html/info-gnu/2017-12/msg00011.html


author: Jaroslav Škarvada <jskarvad@redhat.com> - 1:8.6.6-2
changelog:
  - Splitted documentation to the doc subpackage
    Resolves: rhbz#1380291
  - Fixed whitespace
  - Dropped obsoleted defattr


author: Jaroslav Škarvada <jskarvad@redhat.com> - 1:8.6.8-2
changelog:
  - Reverted _module_build macro check which fixes systemtap probes on RHEL-8
    Resolves: rhbz#1579386


author: Petr Pisar <ppisar@redhat.com> - 1.8-1
changelog:
  - 1.8 bump
  - License changed from GPLv2+ to (GPLv3+ and GFDL)
  - Disable printing command failure in POSIX mode


author: Filipe Rosset <rosset.filipe@gmail.com> - 2.5-1
changelog:
  - New upstream release 2.5 - fixes rhbz #1449666
  - https://raw.githubusercontent.com/tmux/tmux/2.5/CHANGES


author: Filipe Rosset <rosset.filipe@gmail.com> - 2.5-4
changelog:
  - Fixes rhbz #1476851 tmux bell-action other not working
  - Fixes rhbz #1476892 tmux update in F26 broke tmuxinator


author: Michal Schmidt <mschmidt@redhat.com> - 1.3.9-1
changelog:
  - Upstream release 1.3.9.
  - Add fixes for build errors with OpenSSL 1.1.
  - Add fixes for NULL cipher context use in seal/unseal.
  - spec file modernization.


author: Javier Martinez Canillas <javierm@redhat.com> - 2.0.0-1
changelog:
  - Download the distributed tarball instead of the source code tarball
  - Update URLs to point to the new project location
  - Update to 2.0.0 release


author: Jerry Snitselaar <jsnitsel@redhat.com> - 3.1.1-4
changelog:
  - lib/tpm2_options: restore TCTI configuration environment variables
  - tpm2_getcap: restore tool output to print properties with TPM_PT prefix
  resolves: rhbz#1648001


author: Javier Martinez Canillas <javierm@redhat.com> - 1.3.0-0.1.rc2
changelog:
  - Update to 1.3.0 release candidate 2 (RHBZ#1508870)
  - Remove global pkg_prefix since now the upstream repo and package names match
  - Update URLs to point to the new project location
  - Remove -Wno-int-in-bool-context compiler flag since now upstream takes care
  - Remove %doc directive since README.md and CHANGELOG.md are not in the tarball
  - Add patch to include a LICENSE since the generated tarball does not have it


author: Javier Martinez Canillas <javierm@redhat.com> - 1.4.0-1
changelog:
  - Update URLs to point to the new project location
  - Add README.md CHANGELOG.md to %files directive
  - Update to 1.4.0 release (RHBZ#1508870)


author: Yunying Sun <yunying.sun@intel.com> - 2.0.0-1
changelog:
  - Update to 2.0.0 release (RHBZ#1508870)
  - Remove patch file 60-tpm-udev.rules, use upstream tpm-udev.rules instead
  - Disable ESAPI to fix build errors caused by dependency to libgcrypt 1.6.0
  - Add scriptlet to fix Rpath errors
  - Update file installation paths and names accordingly


author: Yunying Sun <yunying.sun@intel.com> - 2.0.0-2
changelog:
  - Re-enable ESAPI since gcrypt dependency is not an issue for Fedora
  - Bump release version to 2.0.0-2


author: John Kacur <jkacur@redhat.com> - 2.7-8
changelog:
  - Install kernelshark manpage with kernelshark subpackage, not with trace-cmd
  Resolves: rhbz#1678252


author: Kamil Dudka <kdudka@redhat.com> - 1.7.0-11
changelog:
  - do not escape UTF-8 chars in file names by default in UTF-8 locale (#1480778)
  - modernize spec file (Group, BuildRoot, autosetup, clean, defattr)


author: Merlin Mathesius <mmathesi@redhat.com> - 1027-1
changelog:
  - Version bump. Now supported for all architectures.
  - Generate man pages since they are no longer included in source archive.


author: Jerry Snitselaar <jsnitsel@redhat.com> - 1234-5
changelog:
  - Move header files to ibmtss directory.
  - Check return value of TSS_Hash_Generate.
  resolves: rhbz#1636245


author: John Kacur <jkacur@redhat.com> - 0.14-2
changelog:
  - Add method to compare class cpu for sorting
  - Use args attributes for exceptions for python3
  Resolves: rhbz#1651465


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.13.0-0.1.rc1
changelog:
  - new release
    - rebased tuned to latest upstream
      resolves: rhbz#1738250
    - cpu: fixed checking if EPB is supported
      resolves: rhbz#1690929
    - scheduler: fixed IRQ SMP affinity verification to respect ignore_missing
      resolves: rhbz#1729936
    - realtime: enabled ktimer_lockless_check
      resolves: rhbz#1734096
    - plugins: support cpuinfo_regex and uname_regex matching
      resolves: rhbz#1748965
    - sysctl: made reapply_sysctl ignore configs from /usr
      resolves: rhbz#1759597
    - added support for multiple include directives
      resolves: rhbz#1760390
    - realtime: added nowatchdog kernel command line option
      resolves: rhbz#1767614


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.13.0-1
changelog:
  - new release
    - rebased tuned to latest upstream
      related: rhbz#1738250
    - sap-hana: updated tuning
      resolves: rhbz#1779821
    - latency-performance: updated tuning
      resolves: rhbz#1779759


author: Patsy Franklin <pfrankli@redhat.com> - 2018d-1
changelog:
  - Rebase to tzdata-2018d:
    - DST for Asia/Gaza and Asia/Hebron has changed 
      from March 31 to March 24.
    - Antarctica/Casey station changed to UTC+8 on March 11.


author: Patsy Franklin <pfrankli@redhat.com> - 2018e-1
changelog:
  - Rebase to tzdata-2018e
    - North Korea changed from UTC+8:30 to UTC+9 on May 5, 2018.
    - In this update, the upstream project now defaults to using
      the "vanguard" data implementation which includes negative DST offsets.


author: Patsy Griffin Franklin <pfrankli@redhat.com> - 2018g-1
changelog:
  - Rebase to tzdata-2018g
    - Morocco will remain at UTC+1 rather than switching back to UTC+0 as
      planned.  This change is effective Octobober 28, 2018.
  - Include changes introduced in tzdata-2018f
    - Volgograd will change from UTC+03 to UTC+04 on 2018-10-28 at 02:00.
    - Fiji will end DST on 2019-01-13 instead of the 2019-01-20 as
      previously predicted.
    - Most of Chile will end DST on the first Saturday in April at 24:00
      and restart DST on the first Saturday in September at 24:00.


author: Patsy Griffin Franklin <pfrankli@redhat.com> - 2018i-1
changelog:
  - Rebase to tzdata-2018i (includes changes from tzdata-2018h)
    - São Tomé and Príncipe changed from UTC+01 to UTC+00 on 2019-01-01.
    - Qyzylorda, Kazakhstan changed from UTC+06 to UTC+05 on 2018-12-21.
    - Created a new zone Asia/Qostanay since Qostanay, Kazakhstan didn't 
      transition with the Qyzylorda change.
    - Metlakatla, Alaska will observe PST for this winter only.
    - Predict that Morocco will continue to adjust clocks around Ramadan.
    - Also include predictions for Iran from 2038 through 2090.


author: Patsy Griffin Franklin <patsy@redhat.com> - 2019a-1
changelog:
  - Rebase to tzdata-2019a
    - Palestine will start DST on 2019-03-30, rather than 2019-03-23 as
      previously predicted.
    - Metlakatla rejoined Alaska time on 2019-01-20, ending its observances
      of Pacific standard time.


author: Patsy Griffin <patsy@redhat.com> - 2019b-1
changelog:
  - Rebase to tzdata-2019b
    - Brazil will no longer observe DST going forward.
    - The 2019 spring transition for Palestine occurred 03-29, not 03-30.


author: Patsy Griffin <patsy@redhat.com> - 2019c-1
changelog:
  - Rebase to tzdata-2019c
    - Fiji will observe DST from 2019-11-10 to 2020-01-12.
    - Norfolk Island will begin observing Australian-style DST on 2019-10-06.


author: Patsy Griffin <patsy@redhat.com> - 2020a-1
changelog:
  - Rebase to tzdata-2020a
    - Morocco will spring forward on 2020-05-31 rather than
      previously predicted 2020-05-24.
    - Canada's Yukon region changed to year round UTC -07
      effective 2020-03-08.
    - America/Godthab was renamed to America/Nuuk.


author: Kamil Dudka <kdudka@redhat.com> - 2.17-5
changelog:
  - do not update currency.units from network during build
  - units_cur: validate rate data from server (#1598913)


author: Jakub Martisko <jamartis@redhat.com> - 6.0-38
changelog:
  - Fix CVE-2018-1000035 - heap based buffer overflow when opening
    password protected files.
    Resolves: 1537043


author: Jakub Martisko <jamartis@redhat.com> - 6.0-40
changelog:
  - fix several possibly unterminated strings
    When copying to OEM_CP and ISO_CP strings, the string could end unterminated
    (stncpy does not append '\0').
  - Related: #1602721


author: Lubomir Rintel <lkundrak@v3.sk> - 2.4.0-2
changelog:
  - Add the previously omitted systemd service file (rh #1352055)
  - Fix crash with invalid arguments (rh #1358472)


author: Miloslav Trmač <mitr@redhat.com> - 1.111-10
changelog:
  - Fix a FBFS with  -Werror=format-security
    Resolves #1444750
  - Fix inconsistent dates in %changelog


author: Jiri Kucera <jkucera@redhat.com> - 1.112-2
changelog:
  - Dropped need to run autotools
  - <sys/sysmacros.h> must be now included manually
    Resolves #1611752
  - Fixed bad FSF address


author: - Andy Walsh <awalsh@redhat.com> - 6.2.0.239-8
changelog:
  - Modified vdo script to use the new physical and logical growth procedures
    including support for the new table line format (the old format is still
    supported as well).
  - Resolves: rhbz#1631869


author: - Andy Walsh <awalsh@redhat.com> - 6.2.0.273-9
changelog:
  - Fixed a build dependency issue with device-mapper-devel
  - Resolves: rhbz#1650686
  - Improved checking for existing LVM physical volumes when formatting a new VDO
    volume.
  - Resolves: rhbz#1627859
  - Removed read cache statistics, configuration options, and table line
    parameters.
  - Resolves: rhbz#1639792
  - Fixed a bug which would cause the default logical size to be 480 KB smaller
    than it could be without causing over-provisioning.
  - Resolves: rhbz#1645690
  - Limited the number of logical zones to 60.
  - Resolves: rhbz#1645325
  - Removed extraneous man pages.
  - Resolves: rhbz#1649950


author: - Andy Walsh <awalsh@redhat.com> - 6.2.0.293-10
changelog:
  - Fixed a bug in the vdo script when checking the logical thread count.
  - Resolves: rhbz#1645325
  - Corrected the vdo script manpage entry for maxDiscardSize.
  - Resolves: rhbz#1651251
  - Allowed VDO backing devices to be specified by major:minor device number.
  - Resolves: rhbz#1594285
  - Fixed bugs when the vdo script is invoked against an existing device
    which is not a VDO.
  - Resolves: rhbz#1588083
  - Update vdo manpage to reflect deleted statistics.
  - Resolves: rhbz#1639792
  - Updated vdo script to handle partitioned devices
  - Resolves: rhbz#1658224


author: - Andy Walsh <awalsh@redhat.com> - 6.2.1.48-10
changelog:
  - Added bash command completion for vdostats.
    - Resolves: rhbz#1666425
  - Added missing newline to the output from vdoFormat.
    - Resolves: rhbz#1669492
  - Fixed bug in the value displayed by vdostats for statistics which are not
    currently available.
    - Resolves: rhbz#1668747
  - Updated vdo script to reflect changes in lvm.
    - Resolves: rhbz#1684249
  - Reduced error output when removing a VDO device whose backing storage is
    missing.
    - Resolves: rhbz#1684248
  - Removed the VDO Ansible module and examples from the vdo package.
    - Resolves: rhbz#1669534
    - Resolves: rhbz#1663259
  - Fixed bugs in vdo script argument parsing.
    - Resolves: rhbz#1679224


author: - Andy Walsh <awalsh@redhat.com> - 6.2.1.102-11
changelog:
  - Added bash command completion for the vdo command.
    - Resolves: rhbz#1540287
  - Modified the vdo script's list command to not display VDO devices which
    were not created with the vdo command (i.e. via LVM or using raw dm
    commands).
    - Resolves: rhbz#1686091
  - Modified vdostats to continue to work on VDO devices which were not
    created with the vdo script.
    - Resolves: rhbz#1686091
  - Modified vdo script to always close the UDS index when disabling
    deduplication on a running VDO device.
    - Resolves: rhbz#1643291


author: - Andy Walsh <awalsh@redhat.com> - 6.2.1.134-11
changelog:
  - Added UUID filtering of underlying devices when running vdo create with
    the --force flag as this failed when run on certain PVs.
  - Resolves: rhbz#1710017


author: - Andy Walsh <awalsh@redhat.com> - 6.2.2.18-11
changelog:
  - Added the ability to modify the UUID of a VDO device.
  - Resolves: rhbz#1713749
  - Added an import command to the vdo script to allow management of an
    existing VDO device which is not already in the vdo config file.
  - Resolves: rhbz#1737619
  - Modified the vdo script to warn the user when starting or stopping a VDO
    device if the device is already in the desired state.
  - Resolves: rhbz#1738651


author: - Andy Walsh <awalsh@redhat.com> - 6.2.2.24-11
changelog:
  - Began preparations for releasing more VDO analysis and debugging tools.
  - Relates: rhbz#1687996
  - Really added the ability to modify the UUID of a VDO device (the previous
    version omitted some of the files necessary for this feature).
  - Resolves: rhbz#1713749


author: - Andy Walsh <awalsh@redhat.com> - 6.2.2.33-12
changelog:
  - Fixed bug in the import command of the vdo script which would fail if
    there were no active dm devices.
  - Resolves: rhbz#1767491
  - Added a version command to the vdo script to report the script version.
  - Resolves: rhbz#1730429
  - Added version options to vdo utilities which did not have one.
  - Resolves: rhbz#1730429
  - Removed deprecated vdoprepareupgrade utility.
  - Resolves: rhbz#1774700


author: - Andy Walsh <awalsh@redhat.com> - 6.2.2.117-13
changelog:
  - Improved man pages and help text for vdo script and vdo utilities.
  - Resolves: rhbz#1505748
  - Resolves: rhbz#1636043
  - Resolves: rhbz#1746539
  - Modified vdoformat to display the maximum VDO size based on the
    configured slab size when formatting a volume. Modified vdo script to
    also display this output when creating a new VDO.
  - Resolves: rhbz#1659173


author: Zdenek Dohnal <zdohnal@redhat.com> - 2:8.0.1763-8
changelog:
  - 1640919 - augroup fedora, test case failure: /CoreOS/vim/Regression/bz241308-use-augroup-for-rh-autocmds


author: Richard W.M. Jones <rjones@redhat.com> - 1.18-1
changelog:
  - New upstream version 1.18.
  - Update RPM description section with complete list of supported guests.
  - If ‘make check’ fails, dump ‘test-suite.log’.


author: Richard W.M. Jones <rjones@redhat.com> - 0.5-17
changelog:
  - Remove ldconfig
    https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org/thread/SU3LJVDZ7LUSJGZR5MS72BMRAFP3PQQL/


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 2.21-8
changelog:
  - Fix invalid [ ... ] syntax which results in complaints by zsh.
    https://bugzilla.redhat.com/show_bug.cgi?id=1546221
  - Remove pointless Group tag, buildroot cleaning and %defattr.


author: Jiří Klimeš <blueowl@centrum.cz> - 1:2.6-12
changelog:
  - Fix crash when using MACsec without loaded macsec.ko (rh #1497640)
  - Enable Fast BSS Transition for station mode (rh #1372928)


author: Davide Caratti <dcaratti@redhat.com> - 1:2.6-15
changelog:
  - Disable build of wpa_gui (rh #1542234)
  - Fix build issue with latest kernel headers (rh #1582604)
  - Disable WEXT (rh #1537143)
  - Fix memory leak when macsec MKA/PSK is used (rh #1582511)
  - Fix authentication failure when the MAC is updated externally (rh #1582508)
  - Let the kernel discard EAPOL if packet type is PACKET_OTHERHOST (rh #1582501)


author: Davide Caratti <dcaratti@redhat.com> - 1:2.9-2
changelog:
  - Fix AP mode PMF disconnection protection bypass (CVE-2019-16275)
  - Fix NULL dereference in d-bus handler when P2P control interface is removed (rh #1752780)
  - enable WIFI_DISPLAY (rh #1755941)


author: Eric Sandeen <sandeen@redhat.com> 4.19.0-1
changelog:
  - New upstream release (#1652248)
  - Note reflink default in mkfs.xfs manpage (#1641698)
  - Fix xfs_db sign extension in agi freecount (#1640090)
  - Fix xfs_repair hang on large filesystem (#1630674)


author: Eric Sandeen <sandeen@redhat.com> 5.0.0-1
changelog:
  - New upstream version (#1712147)
  - mkfs.xfs: validate extent size hint parameters (#1683007)
  - mkfs.xfs: null-terminate symlinks created via protofile (#1640503)
  - xfs_repair: allow '/' in attribute names (#1667354)
  - xfs_info: allow device name as parameter (#1679840)
  - xfs_quota: fix project inheritance flag handling (#1664105)
  - xfs_metadump: handle symlinks correctly (#1693074)
  - xfs_db: fix finobt record decoding with sparse inodes (#1690245)


author: Eric Sandeen <sandeen@redhat.com> 5.0.0-2
changelog:
  - mkfs.xfs: validate log stripe unit alignment (#1632596)
  - xfs_growfs: allow mounted device node as argument (#1765217)


author: Pavel Raiskup <praiskup@redhat.com> - 5.2.3-1
changelog:
  - rebase to stable 5.2.3 per release notes:
    http://www.mail-archive.com/xz-devel@tukaani.org/msg00285.html


author: Pavel Raiskup <praiskup@redhat.com> - 5.2.4-1
changelog:
  - rebase to 5.2.4 (rhbz#1574039), per release notes:
    https://www.mail-archive.com/xz-devel@tukaani.org/msg00295.html


author: Pavel Raiskup <praiskup@redhat.com> - 5.2.4-2
changelog:
  - drop ppc64p7 hack, per fedora devel list discussion:
    https://lists.fedoraproject.org/archives/list/
    devel@lists.fedoraproject.org/thread/2OWD2QRDFBEC6HTPVQ7FMJENH32BWT54/
  - don't explicitly set _FILE_OFFSET_BITS, package uses AC_SYS_LARGEFILE


author: Jakub Martisko <jamartis@redhat.com> - 3.0-22
changelog:
  - Add missing linker flags
  - Port the configure patch from unzip that allows linker flags configuration
    from the spec file
  - Related: #1624188


author: Jakub Martisko <jamartis@redhat.com> - 3.0-23
changelog:
  - Set the ziperr function as noreturn
  - Fix email in the previous chnagelog entry
  - Related: #1602741


author: Ondrej Dubaj <odubaj@redhat.com> - 1.2.11-11
changelog:
  - IBM Z hardware-accelerated deflate for s390x architectures
  - IBM CRC32 optimalization for POWER 8+ architectures
  - fixed firefox crash due to zlib (#1741266)
  - added test for crc32


author: Ondrej Dubaj <odubaj@redhat.com> - 1.2.11-13
changelog:
  - Added -DDFLTCC parameter to configure to enable 
  - Z hardware-accelerated deflate for s390x architectures


author: Kamil Dudka <kdudka@redhat.com> - 5.4.2-7
changelog:
  - avoid crash when copying empty hash table (CVE-2018-7549)
  - avoid NULL dereference when using ${(PA)...} on an empty array (CVE-2018-7548)


author: Kamil Dudka <kdudka@redhat.com> - 5.5-1
changelog:
  - update to latest upstream release, which fixes the following vulnerabilities:
      CVE-2018-1100 - stack-based buffer overflow in utils.c:checkmailpath()
      CVE-2018-1083 - stack-based buffer overflow in compctl.c:gen_matches_files()
      CVE-2018-1071 - stack-based buffer overflow in exec.c:hashcmd()


